当前位置：文江博客知识库 en-US 文档 Web CSS clamp

clamp() - CSS: Cascading Style Sheets 编辑

The clamp() CSS function clamps a value between an upper and lower bound. clamp() enables selecting a middle value within a range of values between a defined minimum and maximum. It takes three parameters: a minimum value, a preferred value, and a maximum allowed value. The clamp() function can be used anywhere a <length>, <frequency>, <angle>, <time>, <percentage>, <number>, or <integer> is allowed.

clamp(MIN, VAL, MAX) is resolved as max(MIN, min(VAL, MAX))

Note that using clamp() for font sizes, as in these examples, allows you to set a font-size that grows with the size of the viewport, but doesn't go below a minimum font-size or above a maximum font-size. It has the same effect as the code in Fluid Typography but in one line, and without the use of media queries.

Syntax

The clamp() function takes three comma separated expressions as its parameter, in the order of minimum value, preferred value, maximum value.

The minimum value is the smallest (most negative) value. This is the lower bound in the range of allowed values. If the preferred value is less than this value, the minimum value will be used.

The preferred value is the expression whose value will be used as long as the result is between the minimum and maximum values.

The maximum value is the largest (most positive) expression value to which the value of the property will be assigned if the preferred value is greater than this upper bound.

The expressions can be math functions (see calc() for more information), literal values, or other expressions, such as attr(), that evaluate to a valid argument type (like <length>), or nested min() and max() functions. As math expressions, so you can use addition, subtraction, multiplication and division without using the calc() function itself. You may also use parentheses to establish computation order when needed.

You can use different units for each value in your expressions, and different units in any math function making up any of the arguments.

Notes

Math expressions involving percentages for widths and heights on table columns, table column groups, table rows, table row groups, and table cells in both auto and fixed layout tables may be treated as if auto had been specified.
It is permitted to nest max() and min() functions as expression values, in which case the inner ones are treated as simple parentheses. The expressions are full math expressions, so you can use direct addition, subtraction, multiplication and division without using the calc() function itself.
The expression can be values combining the addition ( + ), subtraction ( - ), multiplication ( * ) and division ( / ) operators, using standard operator precedence rules. Make sure to put a space on each side of the + and - operands. The operands in the expression may be any <length> syntax value. You can use different units for each value in your expression. You may also use parentheses to establish computation order when needed.
Oftentimes you will want to use min() and max() within a clamp() function.

Formal syntax

clamp( <calc-sum>#{3} )where 
<calc-sum> = <calc-product> [ [ '+' | '-' ] <calc-product> ]*
where 
<calc-product> = <calc-value> [ '*' <calc-value> | '/' <number> ]*
where 
<calc-value> = <number> | <dimension> | <percentage> | ( <calc-sum> )

Examples

min, max, and clamp comparison

In this example we have a simple responsive example that makes use of min(), max(), and clamp() for some of the sizes.

The <body> element's width is set as min(1000px, calc(70% + 100px)). This means that the width will be set at 1000px, unless the result of calc(70% + 100px) is less than 1000px, in which case it will be set to that value instead. min() allows you set a maximum value.

The <p> element's font-size is set as max(1.2rem, 1.2vw). This means that the font-size will be set at 1.2rem, unless the computed value of 1.2vw is greater than that of 1.2rem, in which case it will be set to that value instead. max() allows you set a minimum value, which in cases like this is useful for accessibility purposes.

The <h1> element's font-size is set as clamp(1.8rem, 2.5vw, 2.8rem). This means that the font-size will be set at 1.8rem, until the computed value of 2.5vw becomes greater than that of 1.8rem. At this point, font-size will be set at 2.5vw, until 2.5vw's computed value becomes greater than that of 2.8rem. At this point, the font-size will be set at 2.8rem. clamp() allows you to set a minimum and maximum value.

You find this example live on GitHub, if you want to play around with it.

HTML

<h1>Simple responsive test</h1>
<p> Lorem ipsum dolor sit amet, consectetur adipiscing elit. In orci orci, eleifend id risus nec, mattis rutrum velit. Suspendisse fringilla egestas erat eu convallis. Phasellus eu velit ut magna dapibus elementum cursus at ligula. Ut tempus varius nibh, nec auctor sapien iaculis sit amet. Fusce iaculis, libero quis elementum viverra, nulla ante accumsan lectus, sit amet convallis lacus ipsum vel est. Curabitur et urna non est consectetur pulvinar vel id risus. Ut vestibulum, sem in semper aliquet, felis arcu euismod sapien, ac imperdiet massa nisl quis sem. Vestibulum ac elementum felis, in tempor velit. Pellentesque purus ex, mattis at ornare quis, porta condimentum mi. Donec vestibulum ligula vel nulla blandit, quis euismod nulla vestibulum. Suspendisse potenti. Nunc neque mauris, tempor sed facilisis at, ultrices eget nulla. Pellentesque convallis ante nec augue porttitor, id tempus ante luctus.</p>

<p>Integer rutrum sollicitudin tellus, quis cursus nulla scelerisque nec. Nunc eu facilisis lorem. Maecenas faucibus sapien eleifend, semper tellus at, pharetra quam. Cras feugiat vulputate tortor at rhoncus. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos himenaeos. Nam non felis quis sem lobortis sodales vel id libero. Phasellus sit amet placerat lorem. </p>

CSS

html {
  font-family: sans-serif;
}

body {
  margin: 0 auto;
  width: min(1000px, calc(70% + 100px));
}

h1 {
  letter-spacing: 2px;
  font-size: clamp(1.8rem, 2.5vw, 2.8rem);
}

p {
  line-height: 1.5;
  font-size: max(1.2rem, 1.2vw);
}

Specifications

Specification	Status	Comment
CSS Values and Units Module Level 4 The definition of 'clamp()' in that specification.	Editor's Draft	Initial definition.

Browser compatibility

BCD tables only load in the browser

clamp() - CSS: Cascading Style Sheets 编辑

Syntax

Notes

Formal syntax

Examples

min, max, and clamp comparison

HTML

CSS

Specifications

Browser compatibility

See also

如果你对这篇内容有疑问，欢迎到本站社区发帖提问参与讨论，获取更多帮助，或者扫码二维码加入 Web 技术交流群。

发布评论

词条统计

友情链接

clamp() - CSS: Cascading Style Sheets 编辑

HTML

CSS

如果你对这篇内容有疑问，欢迎到本站社区发帖提问 参与讨论，获取更多帮助，或者扫码二维码加入 Web 技术交流群。

发布评论

词条统计

友情链接

如果你对这篇内容有疑问，欢迎到本站社区发帖提问参与讨论，获取更多帮助，或者扫码二维码加入 Web 技术交流群。