sun fire210硬盘突然不见啦

Question

最大化自检

1. Copyright 2003 Sun Microsystems, Inc.  All rights reserved.
2. Use is subject to license terms.
5. Sun(tm) Advanced Lights Out Manager 1.3 (sasuke)
7. Please login:
8. Please login:
10. Serial line login timeout, returns to console stream.
12. Enter #. to return to ALOM.
13. 0>35% Done...
14. 0>38% Done...
15. 0>40% Done...
16. 0>43% Done...
17. 0>46% Done...
18. 0>49% Done...
19. 0>52% Done...
20. 0>55% Done...
21. 0>57% Done...
22. 0>60% Done...
23. 0>63% Done...
24. 0>66% Done...
25. 0>69% Done...
26. 0>72% Done...
27. 0>74% Done...
28. 0>77% Done...
29. 0>80% Done...
30. 0>83% Done...
31. 0>86% Done...
32. 0>89% Done...
33. 0>91% Done...
34. 0>94% Done...
35. 0>97% Done...
36. 0>Test 536870912 bytes on bank 2....
37. 0>1% Done...
38. 0>4% Done...
39. 0>6% Done...
40. 0>9% Done...
41. 0>12% Done...
42. 0>15% Done...
43. 0>18% Done...
44. 0>20% Done...
45. 0>23% Done...
46. 0>26% Done...
47. 0>29% Done...
48. 0>31% Done...
49. 0>34% Done...
50. 0>37% Done...
51. 0>40% Done...
52. 0>43% Done...
53. 0>45% Done...
54. 0>48% Done...
55. 0>51% Done...
56. 0>54% Done...
57. 0>56% Done...
58. 0>59% Done...
59. 0>62% Done...
60. 0>65% Done...
61. 0>68% Done...
62. 0>70% Done...
63. 0>73% Done...
64. 0>76% Done...
65. 0>79% Done...
66. 0>81% Done...
67. 0>84% Done...
68. 0>87% Done...
69. 0>90% Done...
70. 0>93% Done...
71. 0>95% Done...
72. 0>98% Done...
73. 0>INFO:
74. 0>      POST Passed all devices.
75. 0>
76. 0>POST: Return to OBP.
78. SC Alert: Host System has Reset
80. SC Override: Force Diagnostics
82. @(#)OBP 4.11.4 2003/07/23 08:04 Sun Fire V210/V240,Netra 240
83. Clearing TLBs
84. POST Results: Cpu 0000.0000.0000.0000
85.   %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.28c3 %o2 = ffff.ffff.ffff.ffff
86. Membase: 0000.0000.0000.0000
87. MemSize: 0000.0000.0004.0000
88. Init CPU arrays Done
89. Init E$ tags Done
90. Setup TLB (small-footprint mode) Done
91. MMUs ON
92. Scrubbing Tomatillo tags... 0 1
93. Dropin checksum: OK
94. Find dropin, Copying Done, Size 0000.0000.0000.5c60
95. PC = 0000.07ff.f000.4c84
96. PC = 0000.0000.0000.4cf8
97. Dropin checksum: OK
98. Find dropin, Copying Done, Size 0000.0000.0001.0ef0
99. ttya initialized
100. Programming IMAX
101. GPIO config is 1
103. CPU 0 Speed: 1002 Mhz, ratio  6:1 , ECCR: f00c00
104. CPU 0 Memory Configuration: Valid
105. CPU 0 Bank 0 512 MB Bank 1 <empty> Bank 2 512 MB Bank 3 <empty>
106. Master CPU 0 Membase: 200000000 Memsize: 20000000
109. SC Override: Force Diagnostics
111. @(#)OBP 4.11.4 2003/07/23 08:04 Sun Fire V210/V240,Netra 240
112. Clearing TLBs
113. Loading Configuration
114. Membase: 0000.0002.0000.0000
115. MemSize: 0000.0000.2000.0000
116. Init CPU arrays Done
117. Init E$ tags Done
118. Setup TLB Done
119. MMUs ON
120. Scrubbing Tomatillo tags... 0 1
121. Block Scrubbing Done
122. Dropin checksum: OK
123. Find dropin, Copying Done, Size 0000.0000.0000.5c60
124. PC = 0000.07ff.f000.4c84
125. PC = 0000.0000.0000.4cf8
126. Dropin checksum: OK
127. Find dropin, (copied), Decompressing Done, Size 0000.0000.0006.46e0
128. ttya initialized
129. System Reset: CPU Reset (SPOR)
130. JBUS-PCI bridge
131. JBUS-PCI bridge
132. Probing jbus at 0,0 SUNW,UltraSPARC-IIIi (1002 MHz @ 6:1, 1 MB)
133.    memory-controller
134. Probing jbus at 1,0 Nothing there
135. Probing jbus at 1f,0 pci
136. Probing jbus at 1e,0 pci
137. Probing jbus at 1c,0 pci
138. Probing jbus at 1d,0 pci
139. Loading Support Packages: kbd-translator obp-tftp SUNW,i2c-ram-device
140.    SUNW,fru-device SUNW,asr
141. Loading onboard drivers:
142. Probing /pci@1e,600000 Device 7  isa flashprom rtc i2c i2c-bridge
143.    i2c-bridge motherboard-fru-prom chassis-fru-prom
144.    power-supply-fru-prom dimm-spd dimm-spd dimm-spd dimm-spd rscrtc
145.    nvram idprom gpio gpio gpio gpio power serial serial serial rmc-comm
146. CPU 0 Bank 0 base          0 size 512 MB
147. CPU 0 Bank 2 base  200000000 size 512 MB
148. SUNW,Sun-Fire-V210
149. Probing /pci@1d,700000 Device 2  network network
150. Probing /pci@1f,700000 Device 2  network network
151. Probing /pci@1e,600000 Device 6  pmu i2c gpio
152. Probing /pci@1e,600000 Device a  usb
153. Probing /pci@1e,600000 Device d  ide disk cdrom
154. Probing /pci@1e,600000 Device 2  Nothing there
155. Probing /pci@1e,600000 Device 3  Nothing there
156. Probing /pci@1c,600000 Device 2  scsi disk tape scsi disk tape
157. Probing /pci@1c,600000 Device 1  Nothing there
158. Probing /pci@1d,700000 Device 1  SUNW,m64B
159. Sun Fire V210, No Keyboard
160. Copyright 1998-2003 Sun Microsystems, Inc.  All rights reserved.
161. OpenBoot 4.11.4, 1024 MB memory installed, Serial #54519655.
162. Ethernet address 0:3:ba:3f:e7:67, Host ID: 833fe767.
166. [color=Red]Boot device: net [/color] File and args:   

复制代码

Answer 1

本帖最后由 easybegin 于 2010-05-17 11:32 编辑

set-defaults
setenv auto-boot? false
reset-all
probe-scsia-all

找不到的话，把掉硬盘，用光盘或网络引导看是否能进单用户，然后把盘一块块插进去引导到单用户测试。

好像是0号盘坏了

Answer 2

SC Alert: Host System has Reset

@(#)OBP 4.11.4 2003/07/23 08:04 Sun Fire V210/V240,Netra 240
Clearing TLBs
Power-On Reset
Executing Power On SelfTest

0>@(#) Sun Fire[TM] V210/V240,Netra[TM] 240 POST 4.11.4 2003/07/23 11:42
       /export/common-source/firmware_re/post/post-build-4.11.4/Fiesta/enxs/integrated  (firmware_re)  
0>Hard Powerup RST thru SW
0>CPUs present in system: 0
0>OBP->POST Call with %o0=00000000.01004000.
0>Diag level set to MAX.
0>MFG scrpt mode set to NONE
0>I/O port set to TTYA.
0>
0>Start selftest...
0>Init SB
0>L2 Cache Tags Test
0>Init CPU
0>DMMU
0>DMMU TLB DATA RAM Access
0>DMMU TLB TAGS Access
0>IMMU Registers Access
0>IMMU TLB DATA RAM Access
0>IMMU TLB TAGS Access
0>Init mmu regs
0>Setup L2 Cache
0>L2 Cache Control = 00000000.00f04400
0>      Size = 00000000.00100000...
0>Scrub and Setup L2 Cache
0>Setup and Enable DMMU
0>Setup DMMU Miss Handler
0>Test and Init Temp Mailbox
0>CPU Tick and Tick Compare Registers Test
0>CPU Stick and Stick Compare Registers Test
0>Set Timing
0>      UltraSPARC[TM] IIIi, Version 2.4
0>Setup Int Handlers
0>Initialize I2C Controller
0>MB:
SC Alert: SC Request to send Break to host.
Part-Dash-Rev#:  3753149-03-0G  Serial#:  086616
0>CPU0 MB/P0/B0/D0:
0>Part#:  M3 12L3223DT0-CA2   Serial#:  410dbac7  Date Code:  0326  Rev#:  3044
0>CPU0 MB/P0/B0/D1:
0>Part#:  M3 12L3223DT0-CA2   Serial#:  4105babf  Date Code:  0326  Rev#:  3044
0>CPU0 MB/P0/B1/D0:
0>Part#:  72D32501GR7A        Serial#:  074d6a91  Date Code:  0327  Rev#:  020a
0>CPU0 MB/P0/B1/D1:
0>Part#:  72D32501GR7A        Serial#:  074d60db  Date Code:  0327  Rev#:  020a
0>Set CPU/System Speed
0>Jumper data = be
0>..
0>Probe Dimms
0>Init Mem Controller Regs
0>Set JBUS config reg
0>IO-Bridge unit 0 init test            
0>IO-Bridge unit 1 init test            
0>Do PLL reset
0>Setting timing to 6:1 9:1, system frequency 167 MHz, CPU frequency 1002 MHz
0>Soft Power-on RST thru SW
0>CPUs present in system: 0
0>
0>Resume selftest...
0>Init SB
0>Init CPU
0>Init mmu regs
0>Setup L2 Cache
0>L2 Cache Control = 00000000.00f04400
0>      Size = 00000000.00100000...
0>Setup and Enable DMMU
0>Setup DMMU Miss Handler
0>Timing is 6:1 9:1, sys 167 MHz, CPU 1002 MHz, mem 111 MHz.
0>      UltraSPARC[TM] IIIi, Version 2.4
0>Initialize I2C Controller
0>Init Mem Controller Sequence
0>IO-Bridge unit 0 init test            
0>IO-Bridge unit 1 init test            
0>Select Bank Config
0>Probe and Setup Memory
0>INFO:  512MB Bank 0, Dimm Type X8
0>INFO: No memory detected in Bank 1
0>INFO:  512MB Bank 2, Dimm Type X4
0>INFO: No memory detected in Bank 3
0>
0>Data Bitwalk on Master
0>      Test Bank 0.
0>      Test Bank 2.
0>Address Bitwalk on Master
0>INFO: Addr walk mem test on CPU 0 Bank 0: 00000000.00000000 to 00000000.20000000.
0>INFO: Addr walk mem test on CPU 0 Bank 2: 00000002.00000000 to 00000002.20000000.
0>Set Mailbox
0>Final mc1 is 30000006.3e681c3d.
0>Setup Final DMMU Entries
0>Post Image Region Scrub
0>Run POST from Memory
0>Verifying checksum on copied image.
0>The Memory's CHECKSUM value is 1e09.
0>The Memory's Content Size value is 5c60.
0>Success...  Checksum on Memory Validated.
0>I-Cache RAM Test
0>I-Cache Tag RAM
0>I-Cache Valid/Predict TAGS Test
0>I-Cache Snoop Tag Field
0>I-Cache Branch Predict Array Test
0>Branch Prediction Initialization
0>D-Cache RAM
0>D-Cache Tags
0>D-Cache Micro Tags
0>D-Cache SnoopTags Test
0>W-Cache RAM
0>W-Cache Tags
0>W-Cache Valid bit Test
0>W-Cache Bank valid bit Test
0>W-Cache SnoopTAGS Test
0>P-Cache RAM
0>P-Cache Tags
0>P-Cache SnoopTags Test
0>P-Cache Status Data Test
0>8k DMMU TLB 0 Data
0>8k DMMU TLB 1 Data
0>8k DMMU TLB 0 Tags
0>8k DMMU TLB 1 Tags
0>8k IMMU TLB Data
0>8k IMMU TLB Tags
0>FPU Registers and Data Path
0>FPU Move Registers
0>FSR Read/Write
0>FPU Block Register Test
0>FPU Branch Instructions
0>FPU Functional Test
0>Scrub Memory
0>Flush Caches
0>L2-Cache Functional
0>L2-Cache Stress
0>IMMU Functional
0>DMMU Functional
0>I-Cache Functional
0>I-Cache Parity Functional
0>I-Cache Parity Tag
0>I-Cache Snoop Parity Tag
0>D-Cache Functional
0>D-Cache Parity Functional
0>D-Cache Parity Tag Test
0>W-Cache Functional
0>Graphics Functional
0>CPU Superscalar Dispatch
0>SPARC Atomic Instruction Test
0>Non SPARC Atomic Instruction Test
0>SOFTINT Register and Interrupt Test
0>Branch Memory Test
0>Fast ECC test
0>System ECC test
0>XBus SRAM
0>IO-Bridge SouthBridge Remap Devs      
0>JBUS quick check
0>       to IO-bridge_0
0>       to IO-bridge_1
0>IO-Bridge unit 0 sram      test   
0>IO-Bridge unit 0 reg       test   
0>IO-Bridge unit 0 mem       test   
0>IO-Bridge unit 0 PCI id    test   
0>IO-Bridge unit 0 interrupt test   
0>IO-Bridge unit 1 sram      test   
0>IO-Bridge unit 1 reg       test   
0>IO-Bridge unit 1 mem       test   
0>IO-Bridge unit 1 PCI id    test   
0>IO-Bridge unit 1 interrupt test   
0>Print Mem Config
0>Caches : Icache is ON, Dcache is ON, Wcache is ON, Pcache is ON.
0>Memory interleave set to 0
0>      Bank 0  512MB : 00000000.00000000 -> 00000000.20000000.
0>      Bank 2  512MB : 00000002.00000000 -> 00000002.20000000.
0>Block Memory
0>Test 526385152 bytes on bank 0....
0>1% Done...
0>4% Done...
0>6% Done...
0>9% Done...
0>12% Done...
0>15% Done...
0>18% Done...
0>21% Done...
0>23% Done...
0>26% Done...
0>29% Done...
0>32% Done...
0>35% Done...
0>38% Done...
0>40% Done...
0>43% Done...
0>46% Done...
0>49% Done...
0>52% Done...
0>55% Done...
0>57% Done...
0>60% Done...
0>63% Done...
0>66% Done...
0>69% Done...
0>72% Done...
0>74% Done...
0>77% Done...
0>80% Done...
0>83% Done...
0>86% Done...
0>89% Done...
0>91% Done...
0>94% Done...
0>97% Done...
0>Test 536870912 bytes on bank 2....
0>1% Done...
0>4% Done...
0>6% Done...
0>9% Done...
0>12% Done...
0>15% Done...
0>18% Done...
0>20% Done...
0>23% Done...
0>26% Done...
0>29% Done...
0>31% Done...
0>34% Done...
0>37% Done...
0>40% Done...
0>43% Done...
0>45% Done...
0>48% Done...
0>51% Done...
0>54% Done...
0>56% Done...
0>59% Done...
0>62% Done...
0>65% Done...
0>68% Done...
0>70% Done...
0>73% Done...
0>76% Done...
0>79% Done...
0>81% Done...
0>84% Done...
0>87% Done...
0>90% Done...
0>93% Done...
0>95% Done...
0>98% Done...
0>INFO:
0>      POST Passed all devices.
0>
0>POST: Return to OBP.

SC Alert: Host System has Reset

@(#)OBP 4.11.4 2003/07/23 08:04 Sun Fire V210/V240,Netra 240
Clearing TLBs
POST Results: Cpu 0000.0000.0000.0000
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.28c3 %o2 = ffff.ffff.ffff.ffff
Membase: 0000.0000.0000.0000
MemSize: 0000.0000.0004.0000
Init CPU arrays Done
Init E$ tags Done
Setup TLB (small-footprint mode) Done
MMUs ON
Scrubbing Tomatillo tags... 0 1
Dropin checksum: OK
Find dropin, Copying Done, Size 0000.0000.0000.5c60
PC = 0000.07ff.f000.4c84
PC = 0000.0000.0000.4cf8
Dropin checksum: OK
Find dropin, Copying Done, Size 0000.0000.0001.0ef0
ttya initialized
Programming IMAX
GPIO config is 1

CPU 0 Speed: 1002 Mhz, ratio  6:1 , ECCR: f00c00
CPU 0 Memory Configuration: Valid
CPU 0 Bank 0 512 MB Bank 1 <empty> Bank 2 512 MB Bank 3 <empty>
Master CPU 0 Membase: 200000000 Memsize: 20000000

@(#)OBP 4.11.4 2003/07/23 08:04 Sun Fire V210/V240,Netra 240
Clearing TLBs
Loading Configuration
Membase: 0000.0002.0000.0000
MemSize: 0000.0000.2000.0000
Init CPU arrays Done
Init E$ tags Done
Setup TLB Done
MMUs ON
Scrubbing Tomatillo tags... 0 1
Block Scrubbing Done
Dropin checksum: OK
Find dropin, Copying Done, Size 0000.0000.0000.5c60
PC = 0000.07ff.f000.4c84
PC = 0000.0000.0000.4cf8
Dropin checksum: OK
Find dropin, (copied), Decompressing Done, Size 0000.0000.0006.46e0
ttya initialized
System Reset: CPU Reset (SPOR)
JBUS-PCI bridge
JBUS-PCI bridge
Probing jbus at 0,0 SUNW,UltraSPARC-IIIi (1002 MHz @ 6:1, 1 MB)
   memory-controller
Probing jbus at 1,0 Nothing there
Probing jbus at 1f,0 pci
Probing jbus at 1e,0 pci
Probing jbus at 1c,0 pci
Probing jbus at 1d,0 pci
Loading Support Packages: kbd-translator obp-tftp SUNW,i2c-ram-device
   SUNW,fru-device SUNW,asr
Loading onboard drivers:
Probing /pci@1e,600000 Device 7  isa flashprom rtc i2c i2c-bridge
   i2c-bridge motherboard-fru-prom chassis-fru-prom
   power-supply-fru-prom dimm-spd dimm-spd dimm-spd dimm-spd rscrtc
   nvram idprom gpio gpio gpio gpio power serial serial serial rmc-comm
CPU 0 Bank 0 base          0 size 512 MB
CPU 0 Bank 2 base  200000000 size 512 MB
SUNW,Sun-Fire-V210
Probing /pci@1d,700000 Device 2  network network
Probing /pci@1f,700000 Device 2  network network
Probing /pci@1e,600000 Device 6  pmu i2c gpio
Probing /pci@1e,600000 Device a  usb
Probing /pci@1e,600000 Device d  ide disk cdrom
Probing /pci@1e,600000 Device 2  Nothing there
Probing /pci@1e,600000 Device 3  Nothing there
Probing /pci@1c,600000 Device 2  scsi disk tape scsi disk tape
Probing /pci@1c,600000 Device 1  Nothing there
Probing /pci@1d,700000 Device 1  SUNW,m64B
Sun Fire V210, No Keyboard
Copyright 1998-2003 Sun Microsystems, Inc.  All rights reserved.
OpenBoot 4.11.4, 1024 MB memory installed, Serial #54519655.
Ethernet address 0:3:ba:3f:e7:67, Host ID: 833fe767.

                                                                     
ok probe-scsi
Script interrupt: Simple message

SC Alert: SC Request to send Break to host.

ok
SC Alert: SC Request to send Break to host.

ok probe-scsi-all
/pci@1c,600000/scsi@2,1

/pci@1c,600000/scsi@2
Script interrupt: Simple message

SC Alert: SC Request to send Break to host.

ok
SC Alert: SC Request to send Break to host.

Answer 3

回复 6# zhmzhouming

    两个硬盘都找不到了（jumpstart装完后format看的），硬盘绿灯亮

Answer 4

有没有尝试不接硬盘或者只接一个硬盘去probe？
另外，硬盘灯有什么状况？

Answer 5

ok下probe-scsi就死在那拉

Answer 6

帮忙看看是哪个板子出问题啦？

Answer 7

boot首选是disk启动，找不到硬盘局域网有个jumpstart的安装服务器，装系统的时候提示

Boot device: net  File and args:                                      
100 Mbps FDX Link up
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
3a000
Server IP address: 10.101.0.55
Client IP address: 10.101.0.35
100 Mbps FDX Link up

Requesting Internet address for 0:3:ba:3f:e7:67
ramdisk-root ufs-file-system
Loading: /platform/SUNW,Sun-Fire-V210/kernel/sparcv9/unix
Loading: /platform/sun4u/kernel/sparcv9/unix
SunOS Release 5.10 Version Generic_139555-08 64-bit
Copyright 1983-2009 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
os-io Hardware watchdog enabled
SC unretrieved msg MAY 17 01:26:06 2010 UTC [SC System booted.]
Configuring devices.
-

WARNING: /pci@1c,600000/scsi@2 (glm0):
        Connected command timeout for Target 0.0
WARNING: /pci@1c,600000/scsi@2 (glm0):
        got SCSI bus reset
WARNING: /pci@1c,600000/scsi@2 (glm0):
        Connected command timeout for Target 0.0
WARNING: /pci@1c,600000/scsi@2 (glm0):
        got SCSI bus reset
WARNING: /pci@1c,600000/scsi@2 (glm0):
        Unexpected DMA state: ACTIVE. dstat=81<DMA-FIFO-empty,illegal-instruction>
WARNING: /pci@1c,600000/scsi@2 (glm0):
        got SCSI bus reset
WARNING: /pci@1c,600000/scsi@2 (glm0):
        Unexpected DMA state: ACTIVE. dstat=81<DMA-FIFO-empty,illegal-instruction>
WARNING: /pci@1c,600000/scsi@2 (glm0):
        SCSI bus reset recursion
WARNING: glm0: fault detected in device; service unavailable
WARNING: glm0: SCSI bus reset recursion
Using RPC Bootparams for network configuration information.
Attempting to configure interface bge3...
Skipped interface bge3
Attempting to configure interface bge2...
Skipped interface bge2
Attempting to configure interface bge1...
Skipped interface bge1
Attempting to configure interface bge0...
Configured interface bge0
Reading ZFS config: done.
Setting up Java. Please wait...
Serial console, reverting to text install
Beginning system identification...

Answer 8

只有两个硬盘没有连盘阵等外部存储

# dmesg
Mon May 17 09:52:34 CST 2010
May 16 18:50:40 sasuke35 scsi: [ID 107833 kern.warning] WARNING: /pci@1c,600000/scsi@2/sd@b,0 (sd10):
May 16 18:50:40 sasuke35        drive offline
May 16 18:50:40 sasuke35 scsi: [ID 107833 kern.warning] WARNING: /pci@1c,600000/scsi@2/sd@b,0 (sd10):
May 16 18:50:40 sasuke35        drive offline
May 16 18:50:40 sasuke35 scsi: [ID 107833 kern.warning] WARNING: /pci@1c,600000/scsi@2/sd@b,0 (sd10):
May 16 18:50:40 sasuke35        drive offline
May 16 18:50:40 sasuke35 scsi: [ID 107833 kern.warning] WARNING: /pci@1c,600000/scsi@2/sd@b,0 (sd10):
May 16 18:50:40 sasuke35        drive offline
May 16 18:50:40 sasuke35 scsi: [ID 107833 kern.warning] WARNING: /pci@1c,600000/scsi@2/sd@b,0 (sd10):
May 16 18:50:40 sasuke35        drive offline
May 16 18:50:40 sasuke35 scsi: [ID 107833 kern.warning] WARNING: /pci@1c,600000/scsi@2/sd@b,0 (sd10):
May 16 18:50:40 sasuke35        drive offline
May 16 18:50:40 sasuke35 scsi: [ID 107833 kern.warning] WARNING: /pci@1c,600000/scsi@2/sd@c,0 (sd11):

Answer 9

插一个硬盘的时候 probe-scsi出一堆提示

ok probe-scsi
Target 0
  Unit 0   Disk     F ...
yuio654 发表于 2010-05-17 14:42

    我碰到这样的报错时，都是硬盘问题！ 仅供参考！