当前位置：文江博客知识库 en-US 文档 Web API Streams_API Using_readable_streams

Using readable streams - Web APIs 编辑

As a JavaScript developer, programmatically reading and manipulating streams of data received over the network, chunk by chunk, is very useful! But how do you use the Streams API’s readable stream functionality? This article explains the basics.

Note: This article assumes that you understand the use cases of readable streams, and are aware of the high-level concepts. If not, we suggest that you first read the Streams concepts and usage overview and dedicated Streams API concepts article, then come back.

Note: If you are looking for information on writable streams try Using writable streams instead.

Browser support

You can consume Fetch Body objects as streams and create your own custom readable streams in Firefox 65+ and Chrome 42+ (and equivalent Chromium-based browsers). Pipe chains are only supported in Chrome at the moment, and that functionality is subject to change.

Finding some examples

We will look at various examples in this article, taken from our dom-examples/streams repo. You can find the full source code there, as well as links to the examples.

Consuming a fetch as a stream

The Fetch API allows you to fetch resources across the network, providing a modern alternative to XHR. It has a number of advantages, and what is really nice about it is that browsers have recently added the ability to consume a fetch response as a readable stream.

The Body mixin now includes the body property, which is a simple getter exposing the body contents as a readable stream. This mixin is implemented by both the Request and Response interfaces, so it is available on both, although consuming the stream of a response body is perhaps a bit more obvious.

As our Simple stream pump example shows (see it live also), exposing it is a matter of just accessing the body property of the response:

// Fetch the original image
fetch('./tortoise.png')
// Retrieve its body as ReadableStream
.then(response => response.body)

This provides us with a ReadableStream object.

Attaching a reader

Now we’ve got our streaming body, reading the stream requires attaching a reader to it. This is done using the ReadableStream.getReader() method:

// Fetch the original image
fetch('./tortoise.png')
// Retrieve its body as ReadableStream
.then(response => response.body)
.then(body => {
  const reader = body.getReader();

Invoking this method creates a reader and locks it to the stream — no other reader may read this stream until this reader is released, e.g. by invoking ReadableStreamDefaultReader.releaseLock().

Also note that the previous example can be reduced by one step, as response.body is synchronous and so doesn't need the promise:

// Fetch the original image
  fetch('./tortoise.png')
  // Retrieve its body as ReadableStream
  .then(response => {
    const reader = response.body.getReader();

Reading the stream

Now you’ve got your reader attached, you can read data chunks out of the stream using the ReadableStreamDefaultReader.read() method. This reads one chunk out of the stream, which you can then do anything you like with. For example, our Simple stream pump example goes on to enqueue each chunk in a new, custom ReadableStream (we will find more about this in the next section), then create a new Response out of it, consume it as a Blob, create an object URL out of that blob using URL.createObjectURL(), and then display it on screen in an <img> element, effectively creating a copy of the image we originally fetched.

  return new ReadableStream({
    start(controller) {
      return pump();
      function pump() {
        return reader.read().then(({ done, value }) => {
          // When no more data needs to be consumed, close the stream
          if (done) {
              controller.close();
              return;
          }
          // Enqueue the next data chunk into our target stream
          controller.enqueue(value);
          return pump();
        });
      }
    }
  })
})
.then(stream => new Response(stream))
.then(response => response.blob())
.then(blob => URL.createObjectURL(blob))
.then(url => console.log(image.src = url))
.catch(err => console.error(err));

Let’s look in detail at how read() is used. In the pump() function seen above we first invoke read(), which returns a promise containing a results object — this has the results of our read in it, in the form { done, value }:

return reader.read().then(({ done, value }) => {

The results can be one of three different types:

If a chunk is available to read, the promise will be fulfilled with an object of the form { value: theChunk, done: false }.
If the stream becomes closed, the promise will be fulfilled with an object of the form { value: undefined, done: true }.
If the stream becomes errored, the promise will be rejected with the relevant error.

Next, we check whether done is true. If so, there are no more chunks to read (the value is undefined) so we return out of the function and close the custom stream with ReadableStreamDefaultController.close():

if (done) {
  controller.close();
  return;
}

Note: close() is part of the new custom stream, not the original stream we are discussing here. We’ll explain more about the custom stream in the next section.

If done is not true, we process the new chunk we’ve read (contained in the value property of the results object) and then call the pump() function again to read the next chunk.

// Enqueue the next data chunk into our target stream
controller.enqueue(value);
return pump();

This is the standard pattern you’ll see when using stream readers:

You write a function that starts off by reading the stream.
If there is no more stream to read, you return out of the function.
If there is more stream to read, you process the current chunk then run the function again.
You keep running the function recursively until there is no more stream to read, in which case step 2 is followed.

Creating your own custom readable stream

The Simple stream pump example we’ve been studying throughout this article includes a second part — once we’ve read the image from the fetch body in chunks, we then enqueue them into another, custom stream of our own creation. How do we create this? The ReadableStream() constructor.

The ReadableStream() constructor

It is easy to read from a stream when the browser provides it for you as in the case of Fetch, but sometimes you need to create a custom stream and populate it with your own chunks. The ReadableStream() constructor allows you to do this via a syntax that looks complex at first, but actually isn’t too bad.

The generic syntax skeleton looks like this:

const stream = new ReadableStream({
  start(controller) {

  },
  pull(controller) {

  },
  cancel() {

  },
  type,
  autoAllocateChunkSize
}, {
  highWaterMark,
  size()
});

The constructor takes two objects as parameters. The first object is required, and creates a model in JavaScript of the underlying source the data is being read from. The second object is optional, and allows you to specify a custom queuing strategy to use for your stream. You’ll rarely have to do this, so we’ll just concentrate on the first one for now.

The first object can contain up to five members, only the first of which is required:

start(controller) — A method that is called once, immediately after the ReadableStream is constructed. Inside this method, you should include code that sets up the stream functionality, e.g. beginning generation of data or otherwise getting access to the source.
pull(controller) — A method that, when included, is called repeatedly until the stream’s internal queue is full. This can be used to control the stream as more chunks are enqueued.
cancel() — A method that, when included, will be called if the app signals that the stream is to be cancelled (e.g. if ReadableStream.cancel() is called). The contents should do whatever is necessary to release access to the stream source.
type and autoAllocateChunkSize — These are used — when included — to signify that the stream is to be a bytestream. Bytestreams will be covered separately in a future tutorial, as they are somewhat different in purpose and use case to regular (default) streams. They are also not implemented anywhere as yet.

Looking at our simple example code again, you can see that our ReadableStream() constructor only includes a single method — start(), which serves to read all the data out of our fetch stream.

  return new ReadableStream({
    start(controller) {
      return pump();
      function pump() {
        return reader.read().then(({ done, value }) => {
          // When no more data needs to be consumed, close the stream
          if (done) {
            controller.close();
            return;
          }
          // Enqueue the next data chunk into our target stream
          controller.enqueue(value);
          return pump();
        });
      }
    }
  })
})

ReadableStream controllers

You’ll notice that the start() and pull() methods passed into the ReadableStream() constructor are given controller parameters — these are instances of the ReadableStreamDefaultController class, which can be used to control your stream.

In our example we are using the controller’s enqueue() method to enqueue a value into the custom stream after it is read from the fetch body.

In addition, when we are done reading the fetch body we use the controller’s close() method to close the custom stream — any previously-enqueued chunks can still be read from it, but no more can be enqueued, and the stream is closed when reading has finished.

Reading from custom streams

In our Simple stream pump example, we consume the custom readable stream by passing it into a Response constructor call, after which we consume it as a blob().

.then(stream => new Response(stream))
.then(response => response.blob())
.then(blob => URL.createObjectURL(blob))
.then(url => console.log(image.src = url))
.catch(err => console.error(err));

But a custom stream is still a ReadableStream instance, meaning you can attach a reader to it. As an example, have a look at our Simple random stream demo (see it live also), which creates a custom stream, enqueues some random strings into it, and then reads the data out of the stream again once the Stop string generation button is pressed.

Note: In order to consume a stream using FetchEvent.respondWith(), the enqueued stream contents must be of type Uint8Array; for example, encoded using TextEncoder.

The custom stream constructor has a start() method that uses a WindowTimers.setInterval() call to generate a random string every second. ReadableStreamDefaultController.enqueue() is then used to enqueue it into the stream. When the button is pressed, the interval is cancelled, and a function called readStream() is invoked to read the data back out of the stream again. We also close the stream, as we’ve stopped enqueuing chunks to it.

const stream = new ReadableStream({
  start(controller) {
    interval = setInterval(() => {
      let string = randomChars();
      // Add the string to the stream
      controller.enqueue(string);
      // show it on the screen
      let listItem = document.createElement('li');
      listItem.textContent = string;
      list1.appendChild(listItem);
    }, 1000);
    button.addEventListener('click', function() {
      clearInterval(interval);
      readStream();
      controller.close();
    })
  },
  pull(controller) {
    // We don't really need a pull in this example
  },
  cancel() {
    // This is called if the reader cancels,
    // so we should stop generating strings
    clearInterval(interval);
  }
});

In the readStream() function itself, we lock a reader to the stream using ReadableStream.getReader(), then follow the same kind of pattern we saw earlier — reading each chunk with read(), checking whether done is true and then ending the process if so, and reading the next chunk and processing it if not, before running the read() method again.

function readStream() {
  const reader = stream.getReader();
  let charsReceived = 0;

  // read() returns a promise that resolves
  // when a value has been received
  reader.read().then(function processText({ done, value }) {
    // Result objects contain two properties:
    // done  - true if the stream has already given you all its data.
    // value - some data. Always undefined when done is true.
    if (done) {
      console.log("Stream complete");
      para.textContent = result;
      return;
    }

    charsReceived += value.length;
    const chunk = value;
    let listItem = document.createElement('li');
    listItem.textContent = 'Read ' + charsReceived + ' characters so far. Current chunk = ' + chunk;
    list2.appendChild(listItem);

    result += chunk;

    // Read some more, and call this function again
    return reader.read().then(processText);
  });
}

Closing and cancelling streams

We’ve already shown examples of using ReadableStreamDefaultController.close() to close a reader. As we said before, any previously enqueued chunks will still be read, but no more can be enqueued because it is closed.

If you wanted to completely get rid of the stream and discard any enqueued chunks, you'd use ReadableStream.cancel() or ReadableStreamDefaultReader.cancel().

Teeing a stream

Sometimes you might want to read a stream twice, simultaneously. This is achieved via the ReadableStream.tee() method — it outputs an array containing two identical copies of the original readable stream, which can then be read independently by two separate readers.

You might do this for example in a ServiceWorker if you want to fetch a response from the server and stream it to the browser, but also stream it to the Service Worker cache. Since a response body cannot be consumed more than once, and a stream can't be read by more than one reader at once, you’d need two copies to do this.

We provide an example of this in our Simple tee example (see it live also). This example works much the same way as our Simple random stream, except that when the button is pressed to stop generating random strings, the custom stream is taken and teed, and both resulting streams are then read:

function teeStream() {
    const teedOff = stream.tee();
    readStream(teedOff[0], list2);
    readStream(teedOff[1], list3);
  }

Pipe chains

One very experimental feature of streams is the ability to pipe streams into one another (called a pipe chain). This involves two methods — ReadableStream.pipeThrough(), which pipes a readable stream through a writer/reader pair to transform one data format into another, and ReadableStream.pipeTo(), which pipes a readable stream to a writer acting as an end point for the pipe chain.

This functionality is at a very experimental stage and is subject to change, so we have no explored it too deeply as of yet.

We have created an example called Unpack Chunks of a PNG (see it live also) that fetches an image as a stream, then pipes it through to a custom PNG transform stream that retrieves PNG chunks out of a binary data stream.

// Fetch the original image
fetch('png-logo.png')
// Retrieve its body as ReadableStream
.then(response => response.body)
// Create a gray-scaled PNG stream out of the original
.then(rs => logReadableStream('Fetch Response Stream', rs))
.then(body => body.pipeThrough(new PNGTransformStream()))
.then(rs => logReadableStream('PNG Chunk Stream', rs))