PoC Guide: nFactor for Citrix Gateway Authentication with Email OTP 编辑

May 4, 2021 Author:  Matthew BrooksSpecial thanks:  Daniel Feller

PoC Guide: nFactor for Citrix Gateway Authentication with Email OTP


Introduction

Implementing multifactor authentication is one of the best ways to verify identity and improve security posture. Email OTP is a convenient way to implement another factor using the readily available email system. It allows users to receive, copy, and paste authentication validation codes, into their gateway authentication form, from their email client on any device.

Citrix Gateway supports Email OTP authentication, and can provide authentication for various services including web services, VPN, and Citrix Virtual Apps and Desktops. In this POC Guide we demonstrate using it for authentication in a Citrix Virtual Apps and Desktops environment.

Email OTP


Overview

This guide demonstrates how to implement a Proof of Concept environment using two factor authentication with Citrix Gateway. The guide uses LDAP to validate Active Directory credentials as the first factor and use Email OTP as the second factor. It uses a Citrix Virtual Apps and Desktops published virtual desktop to validate connectivity.

It makes assumptions about the completed installation and configuration of the following components:

  • Citrix Gateway installed, licensed, and configure with an externally reachable virtual server bound to a wildcard certificate
  • Citrix Gateway integrated with a Citrix Virtual Apps and Desktops environment which uses LDAP for authentication
  • SMTP server access with the ability to log in with user name and password to originate emails
  • Endpoint with Citrix Workspace app installed
  • Active Directory (AD) is available in the environment

Refer to Citrix Documentation for the latest product version and license requirements: Email OTP Authentication


Citrix Gateway

First, we will log in to the CLI on our gateway and enter the authentication actions and associated policies for LDAP and email respectively. Then we will log in to our GUI to build our nFactor flow in the visualizer tool and complete the multifactor authentication configuration.


Authentication policies

We create the LDAP action, and the policy that references it, which is the first authentication factor. Then we create the Email action, and the policy that references it, which is the second authentication factor.

First connect to the CLI by opening an SSH session the NSIP address of the Citrix ADC and log in as the nsroot administrator.

LDAP action

Populate the following fields to create the LDAP action and paste the completed string into the CLI:

  • ldapAction - enter the action name. We enter authAct_LDAP_eotp
  • serverIP - enter the domain server/s FQDN or IP address. We enter 192.0.2.50 for the private IP address of the domain server in our environment
  • serverPort - enter the LDAP port. We enter 636 for the secure LDAP port
  • ldapBase - enter the string of domain objects and containers where pertinent users are stored in your directory. We enter "OU=Team M,OU=Team Accounts,OU=Demo Accounts,OU=Workspaces Users,DC=workspaces,DC=wwco,DC=net"
  • ldapBindDn - enter the service account used to query domain users. We enter workspacessrv@workspaces.wwco.net
  • ldapBindDnPassword - enter your service account password. The password is encrypted by the Citrix ADC by default
  • ldapLoginName - enter the user object type. We enter userPrincipalName
  • groupAttrName - enter the group attribute name. We enter memberOf
  • subAttributeName - enter the sub attribute name. We enter cn
  • secType - enter the security type. We enter SSL
  • ssoNameAttribute - enter the single sign-on name attribute. We enter userPrincipalName
  • defaultAuthenticationGroup - enter the default authentication group. We enter Email-OTP
  • alternateEmailAttr - enter the user domain object attribute where their email address can be retrieved. We enter otherMailbox

Once you have constructed the full string for your environment copy and paste it into the CLI:add authentication ldapAction authAct_LDAP_eotp -serverIP 192.0.2.50 -serverPort 636 -ldapBase "OU=Team M,OU=Team Accounts,OU=Demo Accounts,OU=Workspaces Users,DC=workspaces,DC=wwco,DC=net" -ldapBindDn workspacessrv@workspaces.wwco.net -ldapBindDnPassword your_service_account_password -ldapLoginName userPrincipalName -groupAttrName memberOf -subAttributeName cn -secType SSL -ssoNameAttribute userPrincipalName -defaultAuthenticationGroup Email-OTP -alternateEmailAttr otherMailbox

A variety of tools exist that may be used to populate Active Directory user object attributes. For the POC we use ADSI edit, from ‘Server Manager > Tools’, to manually add an email address for user1 to it’s ‘otherMailbox’ attribute.

Email OTP

LDAP policy

Populate the following fields to create the LDAP action and paste the completed string into the CLI:

  • Policy - enter the policy name. We enter authPol_LDAP_eotp
  • action - enter the name of the Email action we created above. We enter authAct_LDAP_eotp

Once you have constructed the full string for your environment copy and paste it into the CLI:add authentication Policy authPol_LDAP_eotp -rule true -action authAct_LDAP_eotpLDAPFor more information see LDAP authentication policies

Email action

Populate the following fields to create the Email action and paste the completed string into the CLI:

  • emailAction - enter the action name. We enter authAct_Email_eotp
  • userName - enter the user, or service account, that will log in to the mail server. We enter workspacessrv@workspaces.wwco.net
  • password - enter your service account password to log in to the mail server. The password will be encrypted by the Citrix ADC by default
  • serverURL - enter the FQDN or IP address of the mail server. We enter "smtps://192.0.2.40:587"
  • content - enter the user message next to the field to enter the email code. We enter "Your OTP is $code"
  • time out - enter the number of seconds the email code is valid. We enter 60
  • emailAddress - enter the LDAP object to query for the user email address. We enter "aaa.user.attribute(\"alternate_mail\")"

Once you have constructed the full string for your environment copy and paste it into the CLI:add authentication emailAction authAct_Email_eotp -userName workspacessrv@workspaces.wwco.net -password your_service_account_password -serverURL "smtps://192.0.2.40:587" -content "Your OTP is $code" -timeout 60 -emailAddress "aaa.user.attribute(\"alternate_mail\")"

Email policy

Populate the following fields to create the Email policy and paste the completed string into the CLI:

  • Policy - enter the policy name. We enter authPol_Email_eotp
  • action - enter the name of the Email action we created above. We enter authAct_Email_eotp

Once you have constructed the full string for your environment copy and paste it into the CLI:add authentication Policy authPol_Email_eotp -rule true -action authAct_Email_eotpEmailFor more information see Email authentication policies


nFactor

  1. Log in to the Citrix ADC UI
  2. Navigate to Traffic Management > SSL> Certificates > All Certificates to verify you have your domain certificate installed. In this POC example we used a wildcard certificate corresponding to our Active Directory domain. See Citrix ADC SSL certificates
    for more information.
  3. Next navigate to Security > AAA - Application Traffic > nFactor Visualizer > nFactor Flows
  4. Select Add and select the plus sign in the Factor box
  5. Enter nFactor_EmailOTP and select createEmail OTP
  6. Select Add Schema and select Add again next to Select Policy
  7. Enter lschema_SingleAuth
  8. Under Authentication Schema select the pencil icon to edit the schema selection
  9. Under Schema Files, select LoginSchema, and navigate to LoginSchema, and select SingleAuth.xml
  10. Select the blue select button, followed by Create, followed by OKEmail OTP
  11. In the same box select Add Policy
  12. Select the LDAP policy we created. We use authPol_LDAP_eotp
  13. Select Add
  14. Select the green plus sign next to the authPol_LDAP_eotp policy to create a factor
  15. Enter factor_Email This Factor will use the Email code to perform the 2nd factor authentication
  16. Select Create
  17. In the same box select Add Policy
  18. Select the Email policy we created. We use authPol_Email_eotp
  19. Under Goto Expression select END
  20. Select Add
  21. Now we`ve completed the nFactor flow setup and can click DoneEmail OTP


Citrix ADC authentication, authorization, and auditing (Citrix ADC AAA) virtual server

  1. Next navigate to Security > AAA - Application Traffic > Virtual Servers and select Add
  2. Enter the following fields and click OK:
    • Name - a unique value. We enter ‘EMAILOTP_AuthVserver’
    • IP Address Type - Non Addressable
  3. Select No Server Certificate, select the domain certificate, click Select, Bind, and Continue
  4. Select No nFactor Flow
  5. Under Select nFactor Flow click the right arrow, select the nFactor_EmailOTP flow created earlier
  6. Click Select, followed by BindEMAIL OTP
  7. Click Continue, followed by Done


Citrix Gateway - virtual server

  1. Next navigate to Citrix Gateway > Virtual Servers
  2. Select your existing virtual server that provides proxy access to your Citrix Virtual Apps and Desktops environment
  3. Select Edit
  4. If you currently have an LDAP policy bound navigate under Basic Authentication - Primary Authentication select LDAP Policy. Then check the policy, select Unbind, select Yes to confirm, and select Close
  5. Under the Advanced Settings menu on the right select Authentication Profile
  6. Select Add
  7. Enter a name. We enter EmailOTP_auth_profile
  8. Under Authentication virtual server click the right arrow, and select the Citrix ADC AAA virtual server we created EmailOTP_Auth_Vserver
  9. Click Select, and Create
  10. Click OK and verify the virtual server now has an authentication profile selected while the basic authentication policy has been removedEmail OTP Authentication
  11. Click Done


User Endpoint

Now we test Email OTP by authenticating into our Citrix Virtual Apps and Desktops environment.

  1. Open a browser, and navigate to the domain FQDN managed by the Citrix Gateway. We use https://gateway.workspaces.wwco.net
  2. After your browser is redirected to a login screen enter user userPrincipalName and passwordEmail OTP
  3. Open the user email client and copy the OTP codeEmail OTP
  4. Return to your browser where the user name is populated, paste the code, and click OKEmail OTP
  5. Verify the users virtual apps, and desktops are enumerated, and launch once logged inEmail OTP


Troubleshooting


SMTP server

The Citrix Gateway must be able to authenticate to a mail server with a user name and password in order to originate the client email with the OTP code. If the Citrix Gateway cannot send the email, completion of the first factor will time out after the user submits their user name and password.

  • If your exchange server is configured for NTLM only, by default, the Citrix Gateway will not be able to authenticate. The Citrix Gateway must be able to login with a username and password to compose and send an email with the OTP code. To verify, SSH to the Citrix Gateway, or access the console.
    • Enter the shell and telnet to the mail server TCP port 25. For example telnet ipoct1.ipoct2.ipoct3.ipoct4 25
    • Then enter ehlo. The result should show AUTH LOGIN or AUTH NTLM LOGIN.Email OTPIf it does not show LOGIN for more information see enable login based authentication on the SMTP server.
  • You can also use public email servers such as Gmail. When configuring the Email OTP policy enter smtps://smtp.gmail.com:587 in the email server field. However, you must configure your firewalls to allow outbound SMTPS on TCP port 587.


Summary

With Citrix Workspace and Citrix Gateway, Enterprises can improve their security posture by implementing multifactor authentication without making the user experience complex. Users can get access to all of their Workspaces resources by entering their standard domain user and password and simply confirming their identity with Email OTP sent to their email client.


References

For more information refer to other nFactor authentication options:

Email OTP
– Email OTP is introduced with Citrix ADC 12.1 build 51.x

如果你对这篇内容有疑问,欢迎到本站社区发帖提问 参与讨论,获取更多帮助,或者扫码二维码加入 Web 技术交流群。

扫码二维码加入Web技术交流群

发布评论

需要 登录 才能够评论, 你可以免费 注册 一个本站的账号。
列表为空,暂无数据

词条统计

浏览:36 次

字数:20943

最后编辑:6 年前

编辑次数:0 次

    我们使用 Cookies 和其他技术来定制您的体验包括您的登录状态等。通过阅读我们的 隐私政策 了解更多相关信息。 单击 接受 或继续使用网站,即表示您同意使用 Cookies 和您的相关数据。
    原文