Using the Imaging Wizard to create a virtual disk 编辑
Use the Imaging Wizard to automatically create the base virtual disk image from a master target device.
Prerequisites
Windows NT 6.x:
The Citrix Provisioning Imaging Wizard provides a block-based cloning solution along with the Volume Shadow Copy Service (VSS).
- Each local disk partition is cloned separately to the virtual disk. If there is a separate System Reserved partition on the local disk, it must be included as a source partition.
- Each destination partition must be equal to or larger than the source partition, regardless of the amount of available free space in the source partition.
- If a larger destination partition is needed, after imaging completes, use Windows disk management “Extend Volume…”
- If a smaller destination partition is needed, before imaging, the source partition can be resized using Windows disk management “Shrink Volume…”
Tip:
If a Windows reboot request message displays before the imaging process completes, ignore the request until imaging completes successfully.
Imaging
The Imaging Wizard prompts for information for connecting to the farm. It includes information necessary to set the appropriate credentials/Active Directory and licensing information to apply to this particular virtual disk.
- From the master target device’s Windows Start menu, select Citrix>Citrix Provisioning > Imaging Wizard. The Wizard’s Welcome page appears.
- Click Next. The Connect to Farm page appears.
- Enter the name or IP address of a Citrix Provisioning server within the farm. Include the port used to make that connection.
- Use the Windows credentials (default), or enter different credentials, then click Next. If using Active Directory, enter the appropriate password information.
- On the Microsoft Volume Licensing page, select the volume license option to use for target devices. Or, alternately select None if volume licensing is not being used.
- Select to create a virtual disk (default), or use an existing virtual disk by entering that virtual disk’s name, then click Next.
- If the Create virtual disk option was selected, the New vDisk dialog displays:
- Enter a name for the virtual disk.
- Select the Store where this virtual disk resides.
- Select the vDisk format from the appropriate menus. If the VHDX format is Dynamic, from the VHDX block size menu, select the block size as either 2 MB or 16 MB.
- Click Next, then define volume sizes on the Configure Image Volumes page.
- Click Next. The Add Target Device page appears.
- Select the target device name. Include the MAC address associated with one of the NICs that was selected when the target device software was installed on the master target device. Also include the collection to add this device to. Click Next. If the target device is already a member of the farm, the Existing Target Devices page appears.
- Click Next. A Summary of Farm Changes appears.
- Optionally (unless the virtual disk is used to boot the VMs) select to optimize the virtual disk for use with Citrix Provisioning.
- Verify all changes, then click Finish. A confirmation message displays.
- Click Yes on the confirmation message to start the imaging process.
如果你对这篇内容有疑问,欢迎到本站社区发帖提问 参与讨论,获取更多帮助,或者扫码二维码加入 Web 技术交流群。
绑定邮箱获取回复消息
由于您还没有绑定你的真实邮箱,如果其他用户或者作者回复了您的评论,将不能在第一时间通知您!
发布评论