Network ports 编辑
The following tables list the default network ports used by Delivery Controllers, Windows VDAs, Director, and Citrix License Server. When Citrix components are installed, the operating system’s host firewall is also updated, by default, to match these default network ports.
For an overview of communication ports used in other Citrix technologies and components, see CTX101810.
You may need this port information:
- For regulatory compliance purposes.
- If there is a network firewall between these components and other Citrix products or components, so you can configure that firewall appropriately.
- If you use a third-party host firewall, such as one provided with an anti-malware package, rather than the operating system’s host firewall.
- If you alter the configuration of the host firewall on these components (usually Windows Firewall Service).
- If you reconfigure any features of these components to use a different port or port range, and then want to disable or block ports that are not used in your configuration. Refer to the documentation for the component for details.
- For port information about other components such as StoreFront and Citrix Provisioning (formerly Provisioning Services), see the component’s current “System requirements” article.
The tables list only incoming ports. Outgoing ports are usually determined by the operating system and use unrelated numbers. Information for outgoing ports is not normally needed for the purposes listed above.
Some of these ports are registered with the Internet Assigned Numbers Authority (IANA). Details about these assignments are available at http://www.iana.org/assignments/port-numbers. However, the descriptive information held by IANA does not always reflect today’s usage.
Additionally, the operating system on the VDA and Delivery Controller require incoming ports for its own use. See the Microsoft Windows documentation for details.
VDA, Delivery Controller, and Director
Component | Usage | Protocol | Default incoming port | Notes |
---|---|---|---|---|
VDA | ICA/HDX | TCP, UDP | 1494 | EDT protocol requires 1494 to be open for UDP. See ICA policy settings. |
VDA | ICA/HDX with Session Reliability | TCP, UDP | 2598 | EDT protocol requires 2598 to be open for UDP. If multi-stream and multi-port are enabled, the administrator defines the port numbers for the additional three streams. See ICA policy settings. |
VDA | ICA/HDX over TLS/DTLS | TCP, UDP | 443 | All Citrix Workspace apps |
VDA | ICA/HDX over WebSocket | TCP | 8008 | Citrix Workspace app for HTML5, and Citrix Workspace app for Chrome 1.6 and earlier only |
VDA | ICA/HDX audio over UDP Real-time Transport | UDP | 16500..16509 | |
VDA | ICA/Universal Print Server | TCP | 7229 | Used by the Universal Print Server print data stream CGP (Common Gateway Protocol) listener. |
VDA | ICA/Universal Print Server | TCP | 8080 | Used by the Universal Print Server listener for incoming HTTP/SOAP requests. |
VDA | Wake On LAN | UDP | 9 | Remote PC Access power management |
VDA | Wake Up Proxy | TCP | 135 | Remote PC Access power management |
VDA | Delivery Controller | TCP | 80 | |
Delivery Controller | VDA, StoreFront, Director, Studio | TCP | 80 | |
Delivery Controller | StoreFront, Director, Studio over TLS | TCP | 443 | |
Delivery Controller | Delivery Controller, VDA | TCP | 89 | Local Host Cache (This use of port 89 might change in future releases.) |
Delivery Controller | Orchestration | TCP | 9095 | Orchestration |
Director | Delivery Controller | TCP | 80, 443 |
Citrix Licensing
The following ports are used for Citrix Licensing.
Component | Usage | Protocol | Default incoming port |
---|---|---|---|
License Server | License Server | TCP | 27000 |
License Server | License Server for Citrix (vendor daemon) | TCP | 7279 |
License Server | License Administration Console | TCP | 8082 |
License Server | Web Services for Licensing | TCP | 8083 |
如果你对这篇内容有疑问,欢迎到本站社区发帖提问 参与讨论,获取更多帮助,或者扫码二维码加入 Web 技术交流群。
绑定邮箱获取回复消息
由于您还没有绑定你的真实邮箱,如果其他用户或者作者回复了您的评论,将不能在第一时间通知您!
发布评论