Auto Secure Peering to a PE appliance from a Standalone SD-WAN SE and WANOP Appliance on the DC site 编辑

To perform auto secure peering on a PE appliance from a standalone SD-WAN SE and WANOP appliance on the DC Side:

• WANOP DC appliance is in LISTEN ON mode (2312/Any non-standard port).
• Branch PE appliance is in CONNECT-TO mode.
• WANOP DC initiates automatic secure peering to a PE appliance which installs the Private CA Certs and CERT KEY Pairs and configure CONNECT-TO on the PE appliance with WANOPs LISTEN-ON IP.

1. On a standalone WANOP appliance at the data center, click Secure in the Secure Peering pane of the Secure Acceleration page.

2. Configure the keystore settings by providing the keystore password or by disabling the keystore.

3. Enable Secure Peering by selecting Private CA to perform AUTOMATIC SECURE PEERING.

4. The appliance level CA certificate and private Certificate and Key is generated on the local WANOP and a table to add a REMOTE PEER TO Perform AUTO secure peering with is displayed.

5. Click on the ‘+’ icon and a popup window to add IP address with username and password is displayed. After successful authentication with the remote IP with credentials provided, a request is sent to the remote machine that installs CA Certificate and the Private certificate and key for itself locally (on the remote machine).

Note

• IP Address – IP Address of remote PREMIUM (ENTERPRISE) EDITION APPLIANCE MANAGEMENT IP
• Username – Username of remote PREMIUM (ENTERPRISE) EDITION APPLIANCE
• Password – Password of remote PREMIUM (ENTERPRISE) EDITION APPLIANCE

After Successful Authentication, you will see Secure Peering as TRUE and the partner IP address as one of the Virtual IP addresses of the remote Premium (Enterprise) Edition Appliance.

Monitoring

View Secure Partner Information on the Premium (Enterprise) Edition appliance under WANOPTIMIZATION > Partners in the Monitoring page.

1. Data Store Encryption can be performed on the Premium (Enterprise) Edition appliance through feature enablement from the MCN under Optimization node for a Premium (Enterprise) Edition appliance.

2. For a Premium (Enterprise) Edition appliance, secure peering is always enabled.

3. To validate if the Private CA and Private Certificate Key pair is generated successfully, review the information below:

4. View Secure Partner Information on the Premium (Enterprise) Edition appliance under Monitoring > WAN Optimization > Partners page.

5. On partner appliance, View Secure Partner Information of the Premium (Enterprise) Edition appliance under Monitoring > Partners & Plug-ins > Secure Partners page.

Troubleshooting

1. View Secure Partner Success / Failure Information on the Premium (Enterprise) Edition appliance under Monitoring > WAN Optimization > Partners > Secure Partners page.

2. On partner appliance, view Secure Partner Information on the Premium (Enterprise) Edition appliance under Monitoring > Partners & Plug-ins > Secure Partners page.

3. On partner appliance, view Secure Partner Information on the Premium (Enterprise) Edition appliance under Monitoring > Appliance Performance > Logging page.