Citrix SD-WAN VPXL 编辑

Citrix SD-WAN VPXL-SE is an enhanced version of the SD-WAN VPX-SE platform. Depending on the RAM/CPU/Disk configuration, the VPX platform can be operated either as VPX-SE or VPXL-SE. It is available on all VPX-SE platforms including Azure and AWS.

The Citrix SD-WAN VPXL-SE platform can handle up to 256 virtual paths when provisioned as an MCN/RCN.

Following are the configuration requirements for the VPXL-SE platform.

  • 16 GB memory and 16 CPU cores.
  • 250 GB of HDD.

The number of virtual paths and dynamic virtual paths that the SD-WAN VPXL-SE platform can handle, irrespective of the appliance role (MCN, RCN, or Client) is as follows:

MemoryLess than 16 GiBMore than 16 GiB
Virtual Path16256
Dynamic Virtual Path832

Interface specifications

The SD-WAN VPXL-SE interface specifications are as follows:

  • SD-WAN VPXL-SE supports a maximum number of eight interfaces.
  • The first interface is reserved to be used as the Management IP Address for the Virtual Appliance.
  • Before powering up the new VM for the SD-WAN VPXL-SE Virtual Appliance, you must configure and assign more interfaces (one each) for the LAN and WAN.
  • For SD-WAN VPXL-SE, bridges are not created by default for the data interface (for example, eth1 and eth2).

Configuring Citrix SD-WAN VPXL-SE

To configure SD-WAN VPXL-SE:

  1. Import the SD-WAN VPX-SE base image (.ova or.xva template). Do not Power ON the Virtual machine.
  2. Modify the VM resources for Memory to 16 GB RAM, CPU to 16vCPUs and hard disk size to 250 GB.
  3. Add the required NIC interfaces to the VM (for LAN and WAN interfaces).
  4. Power ON the VM.
  5. Now, SD-WAN VPX-SE would operate as a VPXL-SE platform model.
  6. In case the VM is already Powered ON, before modifying the VM resources, you must perform Reimage Virtual WAN Appliance Software under Configuration > System Maintenance> Update Software, and use the cb-vw_CBVPXL_version.tar.gz image file.

Note

Ensure to clear options that mention to Power on the Virtual machine, after the VM provisioning/import process is complete.

Converting VPX to VPXL

To convert Citrix SD-WAN VPX to Citrix SD-WAN VPXL:

  1. Power off the existing VPX site.
  2. Modify the allocated resource of the VPX site from VPX to VPXL (this can be achieved by changing the vCPU and RAM to 8 GB and 16 GB, respectively.
  3. Login to the management console (Citrix SD-WAN Orchestrator service UI or Citrix SD-WAN appliance UI) and change the site type from VPX to VPXL.
  4. Activate this new configuration by performing a change management if your SD-WAN network is managed by an MCN, or by performing a deployment if it is managed by Citrix SD-WAN Orchestrator.

If your network is managed by the MCN, follow the additional steps provided below:

  1. Once the change management is completed by the MCN, download the latest Local Change Management (LCM) package for the VPXL converted site.
  2. Power on the VPXL converted site, and login to the Citrix SD-WAN appliance UI. Navigate to Configuration > Virtual WAN > Local Change Management and activate the downloaded zip file.
  3. Once the activation is completed, navigate to Configuration > Virtual WAN > Enable/Disable purge flows to enable the virtual WAN service.

    Note

    You might notice a stale entry of the older site in the change management configuration. It can be removed by performing another round of change management.

How to upgrade VPX-SE to VPXL-SE

To upgrade VPX-SE to VPXL-SE:

  1. The VPX-SE should have been installed with an SD-WAN base release version of 9.3.0 or higher.
  2. Backup and save your existing configuration, if the VPX-SE you are upgrading is an MCN.

Important

A VPX-SE appliance provisioned with an SD-WAN release version 9.2 image cannot be upgraded to a VPXL-SE appliance.

To use the VPXL-SE platform, upgrade SD-WAN release version 9.2. to 9.3 using the change management procedure in the SD-WAN web GUI.

Deploying VPXL-SE in Microsoft Azure and AWS

The steps to configure and deploy VPXL-SE in Microsoft Azure are similar to the steps to deploy the VPX-SE appliance in Azure. The only difference in the configuration steps is to choose hard disk space as 250 GB and instance as F8 for the VPXL-SE appliance to be successfully deployed in Azure.

SD-WAN VPXL Azure

Similarly, the steps to configure and deploy VPXL-SE in AWS is similar to the steps for deploying VPX-SE appliance in AWS with the only difference of selecting disk size of 40 GB and instance of m4.4x large.

SD-WAN VPXL AWS

Related information

如果你对这篇内容有疑问,欢迎到本站社区发帖提问 参与讨论,获取更多帮助,或者扫码二维码加入 Web 技术交流群。

扫码二维码加入Web技术交流群

发布评论

需要 登录 才能够评论, 你可以免费 注册 一个本站的账号。
列表为空,暂无数据

词条统计

浏览:13 次

字数:7730

最后编辑:6 年前

编辑次数:0 次

    我们使用 Cookies 和其他技术来定制您的体验包括您的登录状态等。通过阅读我们的 隐私政策 了解更多相关信息。 单击 接受 或继续使用网站,即表示您同意使用 Cookies 和您的相关数据。
    原文