Proxy Server Settings for zero touch deployment 编辑

As a prerequisite for Zero Touch Deployment, the Citrix SD-WAN Center should be connected to the internet. If your Citrix SD-WAN Center is connected to the internet through a proxy server, you have to configure the proxy server settings on the Citrix SD-WAN Center.

Note

This proxy server setting is used for Zero Touch Deployment only.

To configure zero touch proxy server settings:

1. In the SD-WAN Center web interface, navigate to Administration > Global Settings > Management Interface.

2. In the Zero Touch Proxy Server Setting section, enter values for the following fields:

   • IP Address: The IP address of the proxy server.
   • Port: The network port number on which the proxy server accepts connections.
   • User Name: The proxy server user name
   • Password: The password for the proxy server.

   Note

   You can leave the User Name and Password field blank if there is no authentication configured on the proxy server.

   

3. Click Apply, a confirmation dialog box appears.

   

4. Click Apply.

Note

You can remove the proxy server settings altogether, if the Citrix SD-WAN Center is connected to the internet directly. You can also remove the proxy server settings and configure another proxy server, if required.

To remove proxy server settings:

1. In the Citrix SD-WAN Center web interface, navigate to Administration > Global Settings > Management Interface.

2. In the Zero Touch Proxy Server Setting section, click Remove.

   

3. Click Remove, a confirmation dialog box appears.

   

4. Click Remove.