Install a certificate and key on the LOM GUI 编辑

Citrix recommends using HTTPS to access the LOM GUI. To use HTTPS, you must replace the default SSL certificate with one from a trusted certificate authority and upload a private key to the LOM GUI.

To encrypt SNMP alerts, set up an SSL certificate and private key. In the GUI, navigate to Configuration > SSL Certification and apply the SSL certificate and private key. See the Citrix ADC Secure Deployment Guide for more information about how to securely deploy the LOM in your network. To enable encryption and learn the security measures for LOM, see Citrix ADC Secure Deployment Guide.

If you make a mistake, you must restore the BMC to the factory defaults to erase the certificate and key. Use the following shell command:

ipmitool raw 0x30 0x40
<!--NeedCopy-->