System requirements 编辑

Before you install Citrix Application Delivery Management (ADM), you must understand the software requirements, browser requirements, port information, license information, and limitations.

Requirements for Citrix ADM

ComponentRequirement
RAM32 GB
Virtual CPU8 CPUs
 Note: Citrix recommends using solid-state drive (SSD) technology for Citrix ADM deployments.
Storage spaceThe default value is 120 GB. Actual storage requirement depends on Citrix ADM sizing estimation. Use the sizing calculator mentioned in the Maximum limits section (page number 7) in the Citrix ADM HA Deployment Guide. This guide is available at our download site, under NetScaler MAS Release 12.1 > Earlier Versions. Note: you need a Citrix account to access the deployment guide and sizing calculator.
 If your Citrix ADM storage requirement exceeds 120 GB, you to have to attach an additional disk. You can add only one additional disk.
 Citrix recommends you to estimate storage and attach additional disk at the time of initial deployment.
 For more information, see How to Attach an Additional Disk to Citrix ADM.
Virtual network interfaces1
Throughput1 Gbps or 100 Mbps

Note

Citrix ADM is not supported in AMD chipset.

Requirements for Citrix ADM on-prem agent

ComponentRequirement
RAM8 GB
 Note: The default value is 8 GB. Citrix recommends that you increase the default value to 32 GB for better performance.
Virtual CPU2 CPUs
 Note: The default is 2 CPUs. Citrix recommends that you increase the default value to 8 CPUs for better performance.
Storage space30 GB
Virtual network interfaces1
Throughput1 Gbps

Note

Citrix ADM agent is not supported in AMD chipset.

Minimum Citrix ADC version required for Citrix ADM features

Important

The Citrix ADM version and build should be equal to or higher than your Citrix ADC version and build. For example, if you have installed Citrix ADM 12.1 Build 50.39, then ensure you have installed Citrix ADC 12.1 Build 50.28/50.31 or earlier.

Citrix ADM FeatureCitrix ADC Software Version
StyleBooks10.5 and later
OpenStack/CloudStack Support11.0 and later, if a partition is required
 11.1 and later, if partition on shared virtual LAN is required
NSX Support11.1 Build 47.14 and later (VPX)
Mesos/Marathon Support10.5 and later
Backup/RestoreFor Citrix ADC, 10.1 and later
 For Citrix SDX, 11.0 and later
Monitoring/Reporting and Configuration using Jobs10.1 and later
Analytics Features 
Web Insight10.5 and later
HDX Insight10.1 and later
Security Insight11.0.65.31 and later
Gateway Insight11.0.65.31 and later
Cache Insight10.5 and later*
SSL Insight12.0 and later

* Integrated Cache Metrics are not supported in Citrix ADM with Citrix ADC instances running version 11.0 build 66.x.

Requirements for Citrix SD-WAN instance management

Inter-operability matrix of Citrix SD-WAN platform editions / versions and Citrix ADM features

Platform EditionCitrix SD-WAN WANOPCitrix SD-WAN SECitrix SD-WAN PE
DiscoveryYesYesYes
ConfigurationYesNoNo
MonitoringYesNoNo
Reporting (Network Reports)YesNoNo
Event ManagementYesNoNo
HDX InsightYesNoNo
WAN InsightYesNoNo
HDX Insight (Multi-hop Deployment)YesYesNo

Thin clients supported for Citrix SD-WAN instances

Citrix ADM supports the following thin clients for monitoring Citrix SD-WAN deployments:

  • Dell Wyse WTOS Model R10L Rx0L Thin Client

  • NComputing N400

  • Dell Wyse WTOS Model CX0 C00X Xenith

  • Dell Wyse WTOS Model TXO T00X Xenith2

  • Dell Wyse WTOS Model CX0 C10LE

  • Dell Wyse WTOS Model R00LX Rx0L HDX Thin Client

  • Dell Wyse Enhanced SUSE Linux Enterprise, Model Dx0D, D50D

  • Dell Wyse ZX0 Z90D7 (WES7) Thin Client

Requirements for Citrix ADM analytics

Minimum Citrix Virtual Apps and Desktops versions required for Citrix ADM features

Citrix ADM FeatureCitrix Virtual Apps and Desktops Version
HDX InsightCitrix Virtual Apps and Desktops 7.0 and later

Note

The Citrix Gateway feature (branded as Access Gateway Enterprise for versions 9.3 and 10.x) must be available on the Citrix ADC instance. Citrix ADM does not support standalone Access Gateway Standard appliances.

Citrix ADM can generate reports for applications that are published on Citrix Virtual Apps or Citrix Virtual Desktops and accessed through Citrix Receiver. However, this capability depends on the operating system on which Receiver is installed. Currently, a Citrix ADC does not parse ICA traffic for applications or desktops that are accessed through Citrix Receiver running on iOS or Android operating systems.

Thin clients supported for HDX insight

  • Dell Wyse Windows based Thin Clients

  • Dell Wyse Linux based Thin Clients

  • Dell Wyse ThinOS based Thin Clients

  • 10ZiG Ubuntu based Thin Clients

  • IGEL UD3 W7+ (M340)

  • IGEL UD3 W7 (M340C)

Citrix ADC instance license required for HDX insight

The data collected by Citrix ADM for HDX Insight depends on the version and licenses of the Citrix ADC instances being monitored. HDX Insight reports are displayed only for Citrix ADC Platinum and Enterprise appliances running release 10.5 and later.

      
Citrix ADC License/Duration5 minutes1 Hour1 Day1 Week> 1 Month
StandardNoNoNoNoNo
EnterpriseYesYesNoNoNo
PlatinumYesYesYesYesYes

Supported hypervisors

The following table lists the hypervisors supported by Citrix ADM.

HypervisorVersions
Citrix Hypervisor7.1 and 7.4
VMware ESX6.0, 6.5, and 6.7
Microsoft Hyper-V2012 R2 and 2016
Generic KVMRHEL 7.4 and Ubuntu 16.04

Supported operating systems and receiver versions

The following table lists the operating systems supported by Citrix ADM, and the Citrix Receiver versions currently supported with each system:

Operating SystemReceiver Version
Windows4.0 Standard Edition
Linux13.0.265571 and later
Mac11.8, build 238301 and later
HTML51.5*
Chrome App1.5*

* Applicable with Citrix CloudBridge (Citrix SD-WAN WANOP) release 7.4 and later.

Supported browsers

The following table lists the web browsers supported by Citrix ADM:

Web BrowserVersion
Internet Explorer11.0 and later
Google ChromeChrome 19 and later
SafariSafari 5.1.1 and later
Mozilla FirefoxFirefox 3.6.25 and later

Supported ports

Citrix ADM uses the Citrix ADC IP (known as NSIP) address to communicate with Citrix ADC. For communications between Citrix ADC instances and Citrix ADM, or Citrix SD-WAN instances and Citrix ADM, the following ports must be open in Citrix ADM:

Note

If you have configured Citrix ADCs in High Availability mode, Citrix ADM uses the Citrix ADC subnet IP (Management SNIP) address to communicate with Citrix ADC. For communication using SNIP with Citrix ADM, the following ports remain the same.

TypePortDetailsDirection of communication 
TCP80/443For NITRO communication from Citrix ADM to Citrix ADC or Citrix SD-WAN instance.443. For NITRO communication between Citrix ADM servers in high availability mode.Citrix ADM to Citrix ADC and Citrix ADC to Citrix ADM 
TCP22For SSH communication from Citrix ADM to Citrix ADC or Citrix SD-WAN instance. For synchronization between Citrix ADM servers deployed in high availability mode. And, this port is required for the SSH communication between the ADM agent and Citrix ADC.Citrix ADM to Citrix ADC and Citrix ADM agent to Citrix ADC 
UDP4739For AppFlow communication from Citrix ADC or Citrix SD-WAN instance to Citrix ADM.Citrix ADC or Citrix SD-WAN to Citrix ADM 
ICMPNo reserved portTo detect network reachability between Citrix ADM and Citrix ADC instances, SD WAN instances, or the secondary Citrix ADM server deployed in high availability mode.  
UDP161, 162To receive SNMP events from Citrix ADC instance to Citrix ADM.Port 161 - Citrix ADM to Citrix ADC 
   Port 162 - Citrix ADC to Citrix ADM 
UDP514To receive syslog messages from Citrix ADC or Citrix SD-WAN instance to Citrix ADM.Citrix ADC or Citrix SD-WAN to Citrix ADM 
TCP25To send SMTP notifications from Citrix ADM to users.  
TCP389/636Default port for authentication protocol. For communication between Citrix ADM and LDAP external authentication server.Citrix ADM to LDAP external authentication server 
UDP123Default NTP server port for, synchronizing with multiple time sources.  
RADIUS1812Default port for authentication protocol. For communication between Citrix ADM and RADIUS external authentication server.Citrix ADM to RADIUS external authentication server 
TACACS49Default port for authentication protocol. For communication between Citrix ADM and TACACS external authentication server.Citrix ADM to TACACS external authentication server 
TCP5563To receive ADC metrics (counters), system events, and Audit Log messages from Citrix ADC instance to Citrix ADM.Citrix ADC to Citrix ADM 
TCP5557/5558For logstream communication (for Security Insight, Web Insight, and HDX Insight) from Citrix ADC to Citrix ADM.Citrix ADC to Citrix ADM 
TCP5454Default port for communication, and database synchronization in between Citrix ADM nodes in high availability mode.Citrix ADM primary node to Citrix ADM secondary node 
TCP27000License port for communication between Citrix ADM license server and CPX instance.Citrix ADC to Citrix ADM 
TCP7279Citrix vendor daemon port.Citrix ADC to Citrix ADM 
TCP443/8443/7443Port for communication between Citrix ADM agent and Citrix ADM. The ADM agent initiates the communication to Citrix ADM.Citrix ADM agent to Citrix ADM 

Limitations

In 12.1 Citrix ADM, the following features support IPv6 format of IP addresses:

  1. Management access for Citrix ADM GUI

  2. Management access for Citrix ADC

  3. Registration and inventory

  4. Network dashboard

  5. SSL dashboard

  6. Config jobs

  7. Config audit

  8. Network functions

  9. Network reporting

  10. Backup and restore of ADC instances

  11. SNMP events from Citrix ADCs

The following features do not support IPv6:

  1. High availability floating IP

  2. Syslogs received from ADCs that support IPv6

  3. StyleBooks on ADCs that support IPv6

  4. Analytics

  5. Pooled licensing

如果你对这篇内容有疑问,欢迎到本站社区发帖提问 参与讨论,获取更多帮助,或者扫码二维码加入 Web 技术交流群。

扫码二维码加入Web技术交流群

发布评论

需要 登录 才能够评论, 你可以免费 注册 一个本站的账号。
列表为空,暂无数据

词条统计

浏览:3 次

字数:18963

最后编辑:7年前

编辑次数:0 次

    我们使用 Cookies 和其他技术来定制您的体验包括您的登录状态等。通过阅读我们的 隐私政策 了解更多相关信息。 单击 接受 或继续使用网站,即表示您同意使用 Cookies 和您的相关数据。
    原文