Enhanced Infrastructure Analytics with new indicators 编辑
Enhanced Infrastructure Analytics with new indicators
Using the Citrix ADM Infrastructure Analytics, you can:
View a new set of operational issues that occur in Citrix ADC instances.
View error messages and check recommendations to troubleshoot the issues.
As an administrator, you can quickly identify the root cause analysis of issues.
Note
Rule indicators are not supported for:
Citrix ADC instances configured in a cluster mode.
Citrix ADC instances configured with admin partitions.
In Citrix ADM, navigate to Infrastructure > Infrastructure Analytics to view indicators for:
Indicator name in Infrastructure Analytics | Description |
---|---|
Port allocation failure | Detects when Citrix ADC uses SNIP to communicate with a new server connection and total ports available on that SNIP are exhausted. The recommended action is to add another SNIP in the same subnet. |
Session Buildup | Detects when Citrix ADC memory is held up by SSL sessions. |
No default route configuration | Detects when the traffic gets dropped because of non-availability of routes. |
IP conflict | Detects if a same IP address is configured or applied on two or more instances in a network. |
VRID conflict | Detects when intermittent access problems occur for the specified VRID. |
VLAN mismatch | Detects if any errors occur during VLAN configuration bound to IP subnets. |
TCP small window attack | Detects when there is a possible small window attack in progress. This alert is just for informational, because ADC already mitigates this attack. |
Rate control threshold | Detects when packets are dropped based on the configured rate control threshold. |
Persistence Limit | Detects when maximum hits are imposed on the Citrix ADC memory. |
GSLB site name mismatch | Detects when GSLB configuration synchronization failures occur because of site name mismatch. |
Malformed IP header | Detects when sanity checks on IPv4 packets are failed. |
Bad L4 checksums | Detects when checksum validation for TCP packets is failed. |
Increased CPU usage due to IP move | Detects if a large number of macs need to be updated. |
Excessive packet steering | Detects high levels of software packet steering due to the usage of asymmetric rss key type. |
Layer 2 loop | Detects the presence of layer 2 loops in the network. |
Tagged VLAN mismatch | Detects when tagged VLAN packets are received on an untagged interface. |
Tabular view
You can also view anomalies using the tabular view option in Infrastructure Analytics. Navigate to Infrastructure > Infrastructure Analytics and then click to display all managed instances. Click to expand for details.
View details of an anomaly
For example, if you want to view details for IP address conflict in the network, click the anomaly that is displayed for IP address conflict.
Details - Indicates what anomaly is detected
Detection Message - Indicates the MAC address for which the IP address has the conflict
Recommendations - Indicates the troubleshooting procedure to resolve this IP address conflict
如果你对这篇内容有疑问,欢迎到本站社区发帖提问 参与讨论,获取更多帮助,或者扫码二维码加入 Web 技术交流群。
绑定邮箱获取回复消息
由于您还没有绑定你的真实邮箱,如果其他用户或者作者回复了您的评论,将不能在第一时间通知您!
发布评论