4proxy6 中文文档教程
4proxy6
A MITM proxy application with incoming IPv4/IPv6 and random outgoing IPv6
Description
4proxy6 是一种将 HTTP/HTTPS 流量重定向到一个随机的 MITM 代理 网络接口中附加的 IPv6 地址。
每个传入的 HTTP 请求都必须具有 uuid
标头。 发出的所有 HTTP 请求 具有相同的 uuid
标头将使用相同的 IPv6 退出地址,在 一定的时间(默认值:30 分钟)。
Usage
您可以将此包与 node 4proxy6.js
一起使用或使用其中一个二进制文件 在发布部分中提供。
如果您使用 npm:npm install -g 4proxy6
。 您将能够在系统范围内使用它。
Usage: 4proxy6 [options]
Options:
-a, --address <address> IPv6 address of the outgoing interface
-b, --prefix_bits <number> number of bits for IPv6 address prefix (default: 48)
-c, --credentials <user:password> user and password for proxy authentication
-p, --port <address> port for listening (default: 3322)
-t, --ttl <TTL> TTL for cache (default: 1800)
-h, --help output usage information
address
: base IPv6 address of the interface the proxy will use as exit.prefix_bits
: number of bits in the IPv6 address that must not be changed. All other bits will be randomly generated. Example:--address 2001:1234::
and--prefix_bits 16
will generate random exit addresses between2001:0000:0000:0000:0000:0000:0000:0000
and2001:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF
.credentials
: user and password for proxy authentication, formated likeuser:password
. If you don't want authentication, just don't add this flag.port
: TCP port for the proxy.ttl
: amount of seconds auuid
will hold the same IPv6 address.
4proxy6
A MITM proxy application with incoming IPv4/IPv6 and random outgoing IPv6
Description
4proxy6 is a MITM proxy that redirects HTTP/HTTPS traffic to one random IPv6 address attached in your network interfaces.
Each incoming HTTP request must have the uuid
header. All HTTP requests made with the same uuid
header will use the same IPv6 exit address, within a certain amount of time (default: 30 minutes).
Usage
You may use this package with node 4proxy6.js
or using one of the binaries provided in the releases section.
If you use npm: npm install -g 4proxy6
. You will be able to use it system-wide.
Usage: 4proxy6 [options]
Options:
-a, --address <address> IPv6 address of the outgoing interface
-b, --prefix_bits <number> number of bits for IPv6 address prefix (default: 48)
-c, --credentials <user:password> user and password for proxy authentication
-p, --port <address> port for listening (default: 3322)
-t, --ttl <TTL> TTL for cache (default: 1800)
-h, --help output usage information
address
: base IPv6 address of the interface the proxy will use as exit.prefix_bits
: number of bits in the IPv6 address that must not be changed. All other bits will be randomly generated. Example:--address 2001:1234::
and--prefix_bits 16
will generate random exit addresses between2001:0000:0000:0000:0000:0000:0000:0000
and2001:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF
.credentials
: user and password for proxy authentication, formated likeuser:password
. If you don't want authentication, just don't add this flag.port
: TCP port for the proxy.ttl
: amount of seconds auuid
will hold the same IPv6 address.