需要揭示通过Edgemax路由器4连接到开关的设备的IP地址
我想知道，将所有IP地址透露给插入交换机的设备的最佳方法是什么，然后将其插入ubiquiti插入EDGEMAX Router 4。我试图使用Linux上的NMAP命令来揭示192.168.1.1/24背后的所有设备，这是该交换机已插入的地址，但只有一些设备返回。我正在搜索通过交换机连接的OpenBMC设备的IP地址，但找不到。
该开关是基本的TP-Link Gigabit 8端口开关（SG-1008D），据我所知和研究，它似乎没有网络控制台或接口可以在此处显示IP。当我登录Edgemax路由器4时，我只在路由器级别看到设备。
我不是网络知识中最精通的，但我首先做了一些事情来研究。如果有人对我还能尝试什么有进一步的建议，请告诉我。
I am wondering what is the best way to reveal all IP addresses to devices that are plugged into a switch, that is then plugged into an EdgeMax Router 4 by Ubiquiti. I attempted to use the nmap command on linux to reveal all devices behind 192.168.1.1/24, which is the address that the switch is plugged into, but only some devices came back. I was searching for the IP address of an OpenBMC device connected via the switch, but I couldn't find it.
The switch is a basic TP-Link gigabit 8 port switch (SG-1008D) and to my knowledge and research, it doesn't appear to have a web console or interface to reveal IPs there. And when I log into my EdgeMax Router 4, I only see devices at the router level.
I am not the most versed in networking knowledge, but I did a few things first to research. If anyone has any further suggestions on what else I could try, please let me know.
如果你对这篇内容有疑问，欢迎到本站社区发帖提问 参与讨论，获取更多帮助，或者扫码二维码加入 Web 技术交流群。
绑定邮箱获取回复消息
由于您还没有绑定你的真实邮箱，如果其他用户或者作者回复了您的评论，将不能在第一时间通知您！
发布评论
评论（1）
只有第3层开关能够显示直接连接到它们的设备的IP地址。您的 sg-1008d 只是一个不受管理的开关，它将无法显示连接到其的设备的MAC或IP地址。您将能够通过运行网络工具（例如或通过查看路由器的连接设备列表。但这不会向您显示设备在开关中连接的端口。
Only layer 3 switches have the ability to display the IP address of the devices directly connected to them. Your SG-1008D is just an unmanaged switch and it will not be able to display the MAC or the IP address of the devices connected to it. You will be able to identify the MAC and IP address of the devices connected to the switch by running network tools such as Angry IP Scanner or by looking into the connected devices list of the router. But that will not show you the ports where the devices are connected to in the switch.