当前位置： 文江博客话题详情

wpa_supplicant不会连接到WPA企业EAP-PEAP MSCHAPV2

发布于 2025-02-08 22:59:08 字数 10186 浏览 0 评论 0原文

我正在尝试使用PEAP-MSCHAPV2通过WPA_SUPPLICANT使用WPA_Enterprise网络进行身份验证，后端半径服务器正在运行我认为是自由Radius 3.0的功能。我尝试了许多配置文件，凭据是正确的。我不确定为什么无法连接。我将共享我以前的配置文件尝试以及输出。 请注意，输出信息不在配置的各个顺序上，我只是尝试提供尽可能多的信息。此外，我不熟悉平台指南

config 1 

    network={
    ssid="lkpop1"
    scan_ssid=1
    key_mgmt=WPA-EAP
    identity="user1"
    password="password123!"
    eap=PEAP
    phase1="peaplabel=0"
    phase2="auth=MSCHAPV2"
}

config 2 

ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
#country=US
network={
        ssid="lkpop1"
        scan_ssid=1
        key_mgmt=WPA-EAP
        eap=PEAP
        identity="user1"
        password=hash:8119935c5f7fa5f57135620c8073aaca
        phase1="peaplabel=0"
        phase2="auth=MSCHAPV2"


        
      
config 3 

ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
#country=US
network={
        ssid="lkpop1"
        scan_ssid=1
        key_mgmt=WPA-EAP
        eap=PEAP
        identity="user1"
        password="password123!"
        phase1="peaplabel=0"
        phase2="auth=MSCHAPV2"


}

config 4 

ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
#country=US
network={
        ssid="lkpop1"
        scan_ssid=1
        key_mgmt=WPA-EAP
        eap=PEAP
        identity="user1"
        ca_cert="/etc/cert/ca.pem"
        password="password123!"
        phase1="peaplabel=0"
        phase2="auth=MSCHAPV2"
}
   
config 5

network={
        ssid="lkpop1"
        scan_ssid=1
        key_mgmt=WPA-EAP
        eap=PEAP
        identity="user1"
        password=hash:8119935c5f7fa5f57135620c8073aaca
        ca_cert="/etc/cert/ca.pem" 
        phase1="peaplabel=0"
        phase2="auth=MSCHAPV2"
}

输出1

WPA_SUPPLICANT OUTPUT

wpa_supplicant -i wl0 -Dnl80211 -c wpa_supplicant.conf
Successfully initialized wpa_supplicant
rfkill: Cannot open RFKILL control device
rfkill: Cannot get wiphy information
wl0: SME: Trying to authenticate with 00:11:00:be:02:09 (SSID='lkpop1' freq=2452 MHz)
wl0: Trying to associate with 00:11:00:be:02:09 (SSID='lkpop1' freq=2452 MHz)
wl0: Associated with 00:11:00:be:02:09
wl0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
wl0: CTRL-EVENT-EAP-STARTED EAP authentication started
wl0: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=25
wl0: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 25 (PEAP) selected
wl0: CTRL-EVENT-EAP-PEER-CERT depth=1 subject='/C=GB/ST=lk/L=hs/O=pk/[email protected]/CN=ak Certificate Authority' hash=6d7acb97ebc3d10f265bc9e0cb79ce2f915eb1d78fc9bb9318ca74a30ce67856
wl0: CTRL-EVENT-EAP-PEER-CERT depth=1 subject='/C=GB/ST=lk/L=hs/O=pk/[email protected]/CN=ak Certificate Authority' hash=6d7acb97ebc3d10f265bc9e0cb79ce2f915eb1d78fc9bb9318ca74a30ce67856
wl0: CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=GB/ST=lk/O=pk/CN=ak Wi-Fi Radius/[email protected]' hash=6d7acb97ebc3d10f265bc9e0cb79ce2f915eb1d78fc9bb9318ca74a30ce67856
wl0: CTRL-EVENT-EAP-FAILURE EAP authentication failed
wl0: CTRL-EVENT-DISCONNECTED bssid=00:11:00:be:02:09 reason=23
wl0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="lkpop1" auth_failures=1 duration=10 reason=AUTH_FAILED
nl80211: Failed to open /proc/sys/net/ipv4/conf/wl0/drop_unicast_in_l2_multicast: Read-only file system
nl80211: Failed to set IPv4 unicast in multicast filter
^Cnl80211: deinit ifname=p2p-dev-wl0 disabled_11b_rates=0
p2p-dev-wl0: CTRL-EVENT-TERMINATING
nl80211: Failed to open /proc/sys/net/ipv4/conf/wl0/drop_unicast_in_l2_multicast: Read-only file system
nl80211: Failed to set IPv4 unicast in multicast filter
nl80211: Failed to open /proc/sys/net/ipv4/conf/wl0/drop_unicast_in_l2_multicast: Read-only file system
nl80211: Failed to set IPv4 unicast in multicast filter
nl80211: deinit ifname=wl0 direspectivelysabled_11b_rates=0
wl0: CTRL-EVENT-TERMINATING


output 2 

 wpa_supplicant -Dnl80211 -i wl1 -c wpa_supplicant.conf
Successfully initialized wpa_supplicant
rfkill: Cannot open RFKILL control device
rfkill: Cannot get wiphy information
nl80211: Could not set interface 'p2p-dev-wl1' UP
nl80211: deinit ifname=p2p-dev-wl1 disabled_11b_rates=0
p2p-dev-wl1: Failed to initialize driver interface
P2P: Failed to enable P2P Device interface
wl1: SME: Trying to authenticate with 00:11:00:be:02:09 (SSID='lkpop1 ' freq=2452 MHz)
wl1: Trying to associate with 00:11:00:be:02:09 (SSID='lkpop1 ' freq=2452 MHz)
wl1: Associated with 00:11:00:be:02:09
wl1: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
wl1: CTRL-EVENT-EAP-STARTED EAP authentication started
wl1: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=25
wl1: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 25 (PEAP) selected
wl1: CTRL-EVENT-EAP-PEER-CERT depth=1 subject='/C=GB/ST=lk/L=hs/O=pk/[email protected]/CN=pk Certificate Authority' hash=9a1a24894acb1f183e9b290583b9ac48ce94ede298f897197b9c94b9db8eb255
wl1: CTRL-EVENT-EAP-PEER-CERT depth=1 subject='/C=GB/ST=lk/L=hs/O=pk/[email protected]/CN=pk Certificate Authority' hash=9a1a24894acb1f183e9b290583b9ac48ce94ede298f897197b9c94b9db8eb255
wl1: CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=GB/ST=lk/O=pk/CN=pk Wi-Fi Radius/[email protected]' hash=9a1a24894acb1f183e9b290583b9ac48ce94ede298f897197b9c94b9db8eb255
wl1: CTRL-EVENT-EAP-FAILURE EAP authentication failed
wl1: CTRL-EVENT-DISCONNECTED bssid=00:11:00:be:02:09 reason=23
wl1: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="lkpop1 " auth_failures=1 duration=10 reason=AUTH_FAILED
nl80211: Failed to open /proc/sys/net/ipv4/conf/wl1/drop_unicast_in_l2_multicast: Read-only file system
nl80211: Failed to set IPv4 unicast in multicast filter
^Cnl80211: Failed to open /proc/sys/net/ipv4/conf/wl1/drop_unicast_in_l2_multicast: Read-only file system
nl80211: Failed to set IPv4 unicast in multicast filter
nl80211: Failed to open /proc/sys/net/ipv4/conf/wl1/drop_unicast_in_l2_multicast: Read-only file system
nl80211: Failed to set IPv4 unicast in multicast filter
nl80211: deinit ifname=wl1 disabled_11b_rates=0
wl1: CTRL-EVENT-TERMINATING

output 3 

Successfully initialized wpa_supplicant
rfkill: Cannot open RFKILL control device
rfkill: Cannot get wiphy information
nl80211: Could not set interface 'p2p-dev-wl1' UP
nl80211: deinit ifname=p2p-dev-wl1 disabled_11b_rates=0
p2p-dev-wl1: Failed to initialize driver interface
P2P: Failed to enable P2P Device interface
wl1: SME: Trying to authenticate with 00:11:00:be:02:09 (SSID='lkpop1 ' freq=2452 MHz)
wl1: Trying to associate with 00:11:00:be:02:09 (SSID='lkpop1 ' freq=2452 MHz)
wl1: Associated with 00:11:00:be:02:09
wl1: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
wl1: CTRL-EVENT-EAP-STARTED EAP authentication started
wl1: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=25
wl1: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 25 (PEAP) selected
wl1: CTRL-EVENT-EAP-PEER-CERT depth=1 subject='/C=GB/ST=lk/L=hs/O=pk/[email protected]/CN=pk Certificate Authority' hash=9a1a24894acb1f183e9b290583b9ac48ce94ede298f897197b9c94b9db8eb255
wl1: CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=GB/ST=lk/O=pk/CN=pk Wi-Fi Radius/[email protected]' hash=9a1a24894acb1f183e9b290583b9ac48ce94ede298f897197b9c94b9db8eb255
TLS: Certificate verification failed, error 7 (certificate signature failure) depth 0 for '/C=GB/ST=lk/O=pk/CN=pk Wi-Fi Radius/[email protected]'
wl1: CTRL-EVENT-EAP-TLS-CERT-ERROR reason=0 depth=0 subject='/C=GB/ST=lk/O=pk/CN=pk Wi-Fi Radius/[email protected]' err='certificate signature failure'
SSL: SSL3 alert: write (local SSL3 detected an error):fatal:decrypt error
OpenSSL: openssl_handshake - SSL_connect error:0407008A:rsa routines:RSA_padding_check_PKCS1_type_1:invalid padding
OpenSSL: pending error: error:04067072:rsa routines:rsa_ossl_public_decrypt:padding check failed
OpenSSL: pending error: error:0D0C5006:asn1 encoding routines:ASN1_item_verify:EVP lib
OpenSSL: pending error: error:1416F086:SSL routines:tls_process_server_certificate:certificate verify failed
wl1: CTRL-EVENT-EAP-FAILURE EAP authentication failed
wl1: CTRL-EVENT-DISCONNECTED bssid=00:11:00:be:02:09 reason=23
wl1: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="lkpop1 " auth_failures=1 duration=10 reason=AUTH_FAILED
nl80211: Failed to open /proc/sys/net/ipv4/conf/wl1/drop_unicast_in_l2_multicast: Read-only file system
nl80211: Failed to set IPv4 unicast in multicast filter
^Cnl80211: Failed to open /proc/sys/net/ipv4/conf/wl1/drop_unicast_in_l2_multicast: Read-only file system
nl80211: Failed to set IPv4 unicast in multicast filter
nl80211: Failed to open /proc/sys/net/ipv4/conf/wl1/drop_unicast_in_l2_multicast: Read-only file system
nl80211: Failed to set IPv4 unicast in multicast filter
nl80211: deinit ifname=wl1 disabled_11b_rates=0
wl1: CTRL-EVENT-TERMINATING
原文

I am trying to authenticate with a Wpa_enterprise network via Wpa_supplicant using PEAP-MSCHAPv2 , the back-end radius server is running what I believe to be free-radius 3.0. I have tried numerous configuration files, the credentials are correct. I am unsure why I'm unable to connect. I will share my previous configuration file attempts as well the output. Please Note , the output information is not in the respective order of the configs, I am simply trying to provide as much information as possible. Additionally I have replaced the hash values with arbitrary values, as I am not familiar with the platforms guidelines

config 1 

    network={
    ssid="lkpop1"
    scan_ssid=1
    key_mgmt=WPA-EAP
    identity="user1"
    password="password123!"
    eap=PEAP
    phase1="peaplabel=0"
    phase2="auth=MSCHAPV2"
}

config 2 

ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
#country=US
network={
        ssid="lkpop1"
        scan_ssid=1
        key_mgmt=WPA-EAP
        eap=PEAP
        identity="user1"
        password=hash:8119935c5f7fa5f57135620c8073aaca
        phase1="peaplabel=0"
        phase2="auth=MSCHAPV2"


        
      
config 3 

ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
#country=US
network={
        ssid="lkpop1"
        scan_ssid=1
        key_mgmt=WPA-EAP
        eap=PEAP
        identity="user1"
        password="password123!"
        phase1="peaplabel=0"
        phase2="auth=MSCHAPV2"


}

config 4 

ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
#country=US
network={
        ssid="lkpop1"
        scan_ssid=1
        key_mgmt=WPA-EAP
        eap=PEAP
        identity="user1"
        ca_cert="/etc/cert/ca.pem"
        password="password123!"
        phase1="peaplabel=0"
        phase2="auth=MSCHAPV2"
}
   
config 5

network={
        ssid="lkpop1"
        scan_ssid=1
        key_mgmt=WPA-EAP
        eap=PEAP
        identity="user1"
        password=hash:8119935c5f7fa5f57135620c8073aaca
        ca_cert="/etc/cert/ca.pem" 
        phase1="peaplabel=0"
        phase2="auth=MSCHAPV2"
}

output 1

WPA_SUPPLICANT output

wpa_supplicant -i wl0 -Dnl80211 -c wpa_supplicant.conf
Successfully initialized wpa_supplicant
rfkill: Cannot open RFKILL control device
rfkill: Cannot get wiphy information
wl0: SME: Trying to authenticate with 00:11:00:be:02:09 (SSID='lkpop1' freq=2452 MHz)
wl0: Trying to associate with 00:11:00:be:02:09 (SSID='lkpop1' freq=2452 MHz)
wl0: Associated with 00:11:00:be:02:09
wl0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
wl0: CTRL-EVENT-EAP-STARTED EAP authentication started
wl0: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=25
wl0: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 25 (PEAP) selected
wl0: CTRL-EVENT-EAP-PEER-CERT depth=1 subject='/C=GB/ST=lk/L=hs/O=pk/[email protected]/CN=ak Certificate Authority' hash=6d7acb97ebc3d10f265bc9e0cb79ce2f915eb1d78fc9bb9318ca74a30ce67856
wl0: CTRL-EVENT-EAP-PEER-CERT depth=1 subject='/C=GB/ST=lk/L=hs/O=pk/[email protected]/CN=ak Certificate Authority' hash=6d7acb97ebc3d10f265bc9e0cb79ce2f915eb1d78fc9bb9318ca74a30ce67856
wl0: CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=GB/ST=lk/O=pk/CN=ak Wi-Fi Radius/[email protected]' hash=6d7acb97ebc3d10f265bc9e0cb79ce2f915eb1d78fc9bb9318ca74a30ce67856
wl0: CTRL-EVENT-EAP-FAILURE EAP authentication failed
wl0: CTRL-EVENT-DISCONNECTED bssid=00:11:00:be:02:09 reason=23
wl0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="lkpop1" auth_failures=1 duration=10 reason=AUTH_FAILED
nl80211: Failed to open /proc/sys/net/ipv4/conf/wl0/drop_unicast_in_l2_multicast: Read-only file system
nl80211: Failed to set IPv4 unicast in multicast filter
^Cnl80211: deinit ifname=p2p-dev-wl0 disabled_11b_rates=0
p2p-dev-wl0: CTRL-EVENT-TERMINATING
nl80211: Failed to open /proc/sys/net/ipv4/conf/wl0/drop_unicast_in_l2_multicast: Read-only file system
nl80211: Failed to set IPv4 unicast in multicast filter
nl80211: Failed to open /proc/sys/net/ipv4/conf/wl0/drop_unicast_in_l2_multicast: Read-only file system
nl80211: Failed to set IPv4 unicast in multicast filter
nl80211: deinit ifname=wl0 direspectivelysabled_11b_rates=0
wl0: CTRL-EVENT-TERMINATING


output 2 

 wpa_supplicant -Dnl80211 -i wl1 -c wpa_supplicant.conf
Successfully initialized wpa_supplicant
rfkill: Cannot open RFKILL control device
rfkill: Cannot get wiphy information
nl80211: Could not set interface 'p2p-dev-wl1' UP
nl80211: deinit ifname=p2p-dev-wl1 disabled_11b_rates=0
p2p-dev-wl1: Failed to initialize driver interface
P2P: Failed to enable P2P Device interface
wl1: SME: Trying to authenticate with 00:11:00:be:02:09 (SSID='lkpop1 ' freq=2452 MHz)
wl1: Trying to associate with 00:11:00:be:02:09 (SSID='lkpop1 ' freq=2452 MHz)
wl1: Associated with 00:11:00:be:02:09
wl1: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
wl1: CTRL-EVENT-EAP-STARTED EAP authentication started
wl1: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=25
wl1: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 25 (PEAP) selected
wl1: CTRL-EVENT-EAP-PEER-CERT depth=1 subject='/C=GB/ST=lk/L=hs/O=pk/[email protected]/CN=pk Certificate Authority' hash=9a1a24894acb1f183e9b290583b9ac48ce94ede298f897197b9c94b9db8eb255
wl1: CTRL-EVENT-EAP-PEER-CERT depth=1 subject='/C=GB/ST=lk/L=hs/O=pk/[email protected]/CN=pk Certificate Authority' hash=9a1a24894acb1f183e9b290583b9ac48ce94ede298f897197b9c94b9db8eb255
wl1: CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=GB/ST=lk/O=pk/CN=pk Wi-Fi Radius/[email protected]' hash=9a1a24894acb1f183e9b290583b9ac48ce94ede298f897197b9c94b9db8eb255
wl1: CTRL-EVENT-EAP-FAILURE EAP authentication failed
wl1: CTRL-EVENT-DISCONNECTED bssid=00:11:00:be:02:09 reason=23
wl1: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="lkpop1 " auth_failures=1 duration=10 reason=AUTH_FAILED
nl80211: Failed to open /proc/sys/net/ipv4/conf/wl1/drop_unicast_in_l2_multicast: Read-only file system
nl80211: Failed to set IPv4 unicast in multicast filter
^Cnl80211: Failed to open /proc/sys/net/ipv4/conf/wl1/drop_unicast_in_l2_multicast: Read-only file system
nl80211: Failed to set IPv4 unicast in multicast filter
nl80211: Failed to open /proc/sys/net/ipv4/conf/wl1/drop_unicast_in_l2_multicast: Read-only file system
nl80211: Failed to set IPv4 unicast in multicast filter
nl80211: deinit ifname=wl1 disabled_11b_rates=0
wl1: CTRL-EVENT-TERMINATING

output 3 

Successfully initialized wpa_supplicant
rfkill: Cannot open RFKILL control device
rfkill: Cannot get wiphy information
nl80211: Could not set interface 'p2p-dev-wl1' UP
nl80211: deinit ifname=p2p-dev-wl1 disabled_11b_rates=0
p2p-dev-wl1: Failed to initialize driver interface
P2P: Failed to enable P2P Device interface
wl1: SME: Trying to authenticate with 00:11:00:be:02:09 (SSID='lkpop1 ' freq=2452 MHz)
wl1: Trying to associate with 00:11:00:be:02:09 (SSID='lkpop1 ' freq=2452 MHz)
wl1: Associated with 00:11:00:be:02:09
wl1: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
wl1: CTRL-EVENT-EAP-STARTED EAP authentication started
wl1: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=25
wl1: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 25 (PEAP) selected
wl1: CTRL-EVENT-EAP-PEER-CERT depth=1 subject='/C=GB/ST=lk/L=hs/O=pk/[email protected]/CN=pk Certificate Authority' hash=9a1a24894acb1f183e9b290583b9ac48ce94ede298f897197b9c94b9db8eb255
wl1: CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=GB/ST=lk/O=pk/CN=pk Wi-Fi Radius/[email protected]' hash=9a1a24894acb1f183e9b290583b9ac48ce94ede298f897197b9c94b9db8eb255
TLS: Certificate verification failed, error 7 (certificate signature failure) depth 0 for '/C=GB/ST=lk/O=pk/CN=pk Wi-Fi Radius/[email protected]'
wl1: CTRL-EVENT-EAP-TLS-CERT-ERROR reason=0 depth=0 subject='/C=GB/ST=lk/O=pk/CN=pk Wi-Fi Radius/[email protected]' err='certificate signature failure'
SSL: SSL3 alert: write (local SSL3 detected an error):fatal:decrypt error
OpenSSL: openssl_handshake - SSL_connect error:0407008A:rsa routines:RSA_padding_check_PKCS1_type_1:invalid padding
OpenSSL: pending error: error:04067072:rsa routines:rsa_ossl_public_decrypt:padding check failed
OpenSSL: pending error: error:0D0C5006:asn1 encoding routines:ASN1_item_verify:EVP lib
OpenSSL: pending error: error:1416F086:SSL routines:tls_process_server_certificate:certificate verify failed
wl1: CTRL-EVENT-EAP-FAILURE EAP authentication failed
wl1: CTRL-EVENT-DISCONNECTED bssid=00:11:00:be:02:09 reason=23
wl1: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="lkpop1 " auth_failures=1 duration=10 reason=AUTH_FAILED
nl80211: Failed to open /proc/sys/net/ipv4/conf/wl1/drop_unicast_in_l2_multicast: Read-only file system
nl80211: Failed to set IPv4 unicast in multicast filter
^Cnl80211: Failed to open /proc/sys/net/ipv4/conf/wl1/drop_unicast_in_l2_multicast: Read-only file system
nl80211: Failed to set IPv4 unicast in multicast filter
nl80211: Failed to open /proc/sys/net/ipv4/conf/wl1/drop_unicast_in_l2_multicast: Read-only file system
nl80211: Failed to set IPv4 unicast in multicast filter
nl80211: deinit ifname=wl1 disabled_11b_rates=0
wl1: CTRL-EVENT-TERMINATING

如果你对这篇内容有疑问，欢迎到本站社区发帖提问 参与讨论，获取更多帮助，或者扫码二维码加入 Web 技术交流群。

扫码二维码加入Web技术交流群

发布评论

需要 登录 才能够评论， 你可以免费 注册 一个本站的账号。
列表为空，暂无数据

关于作者

去了角落

暂无简介

文章
评论
26 人气
发私信

相关话题

更多

热门标签

操作系统 程序设计 IT运维 Linux系统管理 JavaScript 服务器应用 solaris C/C++ PHP Shell BSD Vue.js aix Oracle Python HTML 系统管理 HTML5 CSS 前端
更多

推荐作者

李珊平

文章 0 评论 0

Quxin

文章 0 评论 0

范无咎

文章 0 评论 0

github_ZOJ2N8YxBm

文章 0 评论 0

若言

文章 0 评论 0

南…巷孤猫

文章 0 评论 0

更多

友情链接

文江博客
    我们使用 Cookies 和其他技术来定制您的体验包括您的登录状态等。通过阅读我们的 隐私政策 了解更多相关信息。 单击 接受 或继续使用网站，即表示您同意使用 Cookies 和您的相关数据。
    原文