Forgeviewer 7.68中的现象
我们正在使用forgeviewer。
我尝试使用最近向公众发布的ForgeViewer 7.68，
并经历了以下现象。
加载带有内存限制的大量零件的文件时，加载过程停止在查看器加载屏幕上，但未完成。
内存有限的配置如下。loaderextensions：{svf：“ autodesk.memorylimited”，}，
记忆： { 极限：256， }，我们用100,000名成员检查了NWD文件。
然后，它继续加载，如下图所示， 无论我等待多长时间，模型都不会出现。
加载图像
以前的版本可以正确显示模型。
您有解决方案吗？选择使用内存限制的零件时，某些未选择的零件消失了。
以与上述项目相同的方式授予内存限制。
如果在此状态下选择一个组件，则某些未选择的组件将被隐藏。
这在PC和iOS上都发生。
“ rel =“ nofollow noreferrer”>选择
之后 我们已经确认，任何3D文件都会发生这种情况
在您选择没有组件的位置之前，这种现象将无法修复。
这种现象在上一个版本中存在，但在最新版本中是相同的。使用IFC文件，加载后它们以意外的角度显示。
加载IFC文件时，它不再以正确的方向显示，如下图所示
normal 电流
如果在此状态下屏幕甚至略微移动，它将突然更改为正常方向。
另外，正如现在一样，右上方的立方体和模型的定向方式不一样，因此它处于奇怪的状态。
你知道原因吗？
We are using ForgeViewer.
I tried using ForgeViewer 7.68, which was recently released to the public,
and experienced the following phenomenon.
When loading a file with a large number of parts with memory limit The loading process stops at the viewer loading screen and does not finish.
The memory Limited are configuration as follows.loaderExtensions: {svf: "Autodesk.MemoryLimited",},
memory: {
limit: 256,
},We checked with nwd files with 100,000 members.
Then it continues to load as shown in the image below,
No matter how long I wait, the model does not appear.
loading image
Previous versions would have displayed the model correctly.
Do you have a solution?When selecting parts with memory limit applied, some of the parts that are not selected disappear.
Grant memory limits in the same way as the above item.
If you select a component in this state, some of the unselected components will be hidden.
This happens on both PC and iOS.
before select after select
We have confirmed that this happens with any 3D files
This phenomenon will not be fixed until you select a location without a component.
This phenomenon was present in the previous version, but was the same in the latest version.With ifc files, they are displayed at an unintended angle after loading.
When the ifc file is loaded, it is no longer displayed in the correct orientation as shown in the image below
normal current
If the screen is moved even slightly in this state, it will suddenly change to the normal orientation.
Also, as it is now, the upper right cube and the model are not oriented in the same way, so it is in a strange state.
Do you know the cause of this?
如果你对这篇内容有疑问，欢迎到本站社区发帖提问 参与讨论，获取更多帮助，或者扫码二维码加入 Web 技术交流群。
绑定邮箱获取回复消息
由于您还没有绑定你的真实邮箱，如果其他用户或者作者回复了您的评论，将不能在第一时间通知您！
发布评论