如何为Google Coral Dev Board启用汽车电源？
有没有办法在提供电源时自动打开设备？
当前发生的事情是，当我将USB-C连接器连接到电源时，它会散布以太网橙色的灯，但不会打开设备。然后，如果我删除USB-C，它会闪烁红色功率LED，当我重新连接USB-C时，设备启动可以正常。
如果将电源删除超过〜20秒的耗电，我将需要再次执行整个过程（Connect-DiscoSonnect-connect）。
如果我想始终使用设备（例如：停电设备应返回在线）怎么办？例如，对于Raspberry Pi而言，这似乎很好。
Is there a way to automatically turn on the device whenever power is supplied?
What is currently happening is that when I connect the usb-c connector to the power it lits the ethernet orange light, but doesn't turn the device on. Then, if I remove the usb-c, it blinks the red power led, and when I reconnect the usb-c, device boots ok.
If the power is removed for more than what seems to be ~20 seconds, I would need to perform the entire process again (connect-disconnect-connect).
What if I want to have my device always on (eg.: after power outages device should be back online)? That seems to work just fine for raspberry pi's, for example.
如果你对这篇内容有疑问，欢迎到本站社区发帖提问 参与讨论，获取更多帮助，或者扫码二维码加入 Web 技术交流群。
绑定邮箱获取回复消息
由于您还没有绑定你的真实邮箱，如果其他用户或者作者回复了您的评论，将不能在第一时间通知您！
发布评论
评论（1）
这似乎确实是一个电源问题。
正如我之前提到的，我正在使用 Canakit电源5.1V 3.5a ，表现出了奇怪的行为。
解决方案：将其更改为 Anker PowerPort Speed PD 30 使设备插入USB-C后立即打开。
附加信息：同事也可以复制它，尽管我们的所有珊瑚并不局限于Canakit电源。
It seems to be a power supply issue indeed.
As I previously mentioned I was using a Canakit power supply 5.1V 3.5A that presented that weird behavior.
Solution: Changing it to a Anker PowerPort Speed PD 30 makes the device turn on as soon as we plug the usb-c.
Additional info: A co-worker could also reproduce it, although it doesn't happen with all of our corals and not limited to Canakit power supply.