NFS安装错误，NFS：未知参数＆＃x27; ip＆＃x27;

发布于 2025-01-27 04:32:36 字数 721 浏览 3 评论 0原文

我试图按照Bootlin的文档进行NFS安装。我将参数设置为如下；

setenv bootargs 'console=ttyS0,115200 root=/dev/nfs rw
nfsroot=192.168.0.1:/nfs,nfsvers=3,
ip=192.168.0.100:::::usb0 g_ether.dev_addr=f8:dc:7a:00:00:02
g_ether.host_addr=f8:dc:7a:00:00:01'

setenv bootcmd 'mmc dev 0; devnum=${mmcdev}; setenv devtype mmc;
mmc rescan; run loadimage; run findfdt; run mmcloados'
saveenv

它没有起作用，我会得到以下内容；

[    8.007915] nfs: Unknown parameter 'ip'
[   18.407811] nfs: Unknown parameter 'ip'
[   38.887802] nfs: Unknown parameter 'ip'
[   68.967793] nfs: Unknown parameter 'ip'
[   99.047785] nfs: Unknown parameter 'ip'
[   99.051674] VFS: Unable to mount root fs via NFS.

我应该在哪里解决任何建议？

原文

I was trying to make nfs mounting by following the document of bootlin. I set the parameters as following;

setenv bootargs 'console=ttyS0,115200 root=/dev/nfs rw
nfsroot=192.168.0.1:/nfs,nfsvers=3,
ip=192.168.0.100:::::usb0 g_ether.dev_addr=f8:dc:7a:00:00:02
g_ether.host_addr=f8:dc:7a:00:00:01'

setenv bootcmd 'mmc dev 0; devnum=${mmcdev}; setenv devtype mmc;
mmc rescan; run loadimage; run findfdt; run mmcloados'
saveenv

it did not work, I get the following ;

[    8.007915] nfs: Unknown parameter 'ip'
[   18.407811] nfs: Unknown parameter 'ip'
[   38.887802] nfs: Unknown parameter 'ip'
[   68.967793] nfs: Unknown parameter 'ip'
[   99.047785] nfs: Unknown parameter 'ip'
[   99.051674] VFS: Unable to mount root fs via NFS.

any suggestions where should I look to fix it?

分享到QQ

分享到微博

如果你对这篇内容有疑问，欢迎到本站社区发帖提问参与讨论，获取更多帮助，或者扫码二维码加入 Web 技术交流群。

发布评论

需要登录才能够评论，你可以免费注册一个本站的账号。

栖迟 2025-02-03 04:32:36

它正在阅读ip作为nfsroot的参数：

setenv bootargs 'console=ttyS0,115200 root=/dev/nfs rw
nfsroot=192.168.0.1:/nfs,nfsvers=3,
                                  ^
                                  |
----------------------------------

ip=192.168.0.100:::::usb0 g_ether.dev_addr=f8:dc:7a:00:00:02
g_ether.host_addr=f8:dc:7a:00:00:01'

ip应该是一个单独的选项：

setenv bootargs 'console=ttyS0,115200 root=/dev/nfs rw ip=192.168.0.100:::::usb0 g_ether.dev_addr=f8:dc:7a:00:00:02
g_ether.host_addr=f8:dc:7a:00:00:01 nfsroot=192.168.0.1:/nfs,v3'

It is reading ip as a parameter of nfsroot:

setenv bootargs 'console=ttyS0,115200 root=/dev/nfs rw
nfsroot=192.168.0.1:/nfs,nfsvers=3,
                                  ^
                                  |
----------------------------------

ip=192.168.0.100:::::usb0 g_ether.dev_addr=f8:dc:7a:00:00:02
g_ether.host_addr=f8:dc:7a:00:00:01'

ip should be a separate option:

setenv bootargs 'console=ttyS0,115200 root=/dev/nfs rw ip=192.168.0.100:::::usb0 g_ether.dev_addr=f8:dc:7a:00:00:02
g_ether.host_addr=f8:dc:7a:00:00:01 nfsroot=192.168.0.1:/nfs,v3'

回复收藏 0 原文

~没有更多了~