我是FPGA设计新手，当我完成设计后，如何才能使我的设计成为真正的芯片？
我是 FPGA 设计新手，当我完成设计时， 如何才能让我的设计成为真正的芯片？
I am new to FPGA design, When I finished my design,
How could I make my design became a real chip?
如果你对这篇内容有疑问，欢迎到本站社区发帖提问 参与讨论，获取更多帮助，或者扫码二维码加入 Web 技术交流群。
绑定邮箱获取回复消息
由于您还没有绑定你的真实邮箱，如果其他用户或者作者回复了您的评论，将不能在第一时间通知您！
发布评论
评论（2）
当我完成设计后，如何才能让我的设计成为真正的芯片？
你需要生成一个 FPGA 比特流。比特流包括硬件逻辑、路由以及寄存器和片上存储块的初始值的描述。这个特定的比特流文件不仅仅是配置 FPGA 的比特。它还具有某些人类可读字段来描述这些位，并且还具有类似汇编的指令集来描述 FPGA 配置过程。
When I finished my design, How could I make my design became a real chip?
You need to generate a FPGA bitstream. A bitstream includes the description of the hardware logic, routing, and initial values for both registers and on-chip memory blocks. This particular bitstream file is more than the bits to configure an FPGA. It also has certain human-readable fields to describe those bits and it also has an assembly-like instruction set to describe the FPGA configuration process.
您可以采取两条路线（忽略购买单独晶体管/分立 IC 和大量焊接的选项），最简单的方法是找到符合您要求的 FPGA（开发板），然后使用供应商推荐的工具来生成和配置FPGA。您可能需要对您的设计进行一些小的更改，以使其适合/更好地利用可用资源。
另一种（方式更昂贵但便宜，当需要数百万芯片时）是去 ASIC 方式。我不会向新人推荐这个。
There are two routes you can take (ignoring the option to buy separate transistors/discrete ICs and lots of soldering) the easiest is to find an FPGA(devboard) that matches your requirements and then using the vendors' recommended tool to generate and configure the FPGA. You may need to make small changes to your design to make it fit/better utilize the available resources.
The other (way-way-more-expensive-but-cheap-when-needing-millions-of-chips) is to go the ASIC way. I wouldn't recommend that to someone who is new though.