Linux 守护进程没有分叉？

Question

我在让我的自制守护进程工作时遇到问题。这是在 Ubuntu 上

每当我打电话时

服务 mydaemon 启动

守护进程启动，但我从未将控制权返回到控制台。这就像该进程没有分叉或其他什么......

这是我在守护进程开始时所做的事情。

pid_t pid;
    //fork duplicates the current process
    pid = fork();

    //The parent process should get a non-zero pid from fork
    //The child process should get 0
    if (pid < 0) //negative indicates error
    {
        cout << "Error starting Daemon.";
        exit(EXIT_FAILURE);
    } 
    else if (pid > 0) //parent process, exit success
    {
        cout << "Error starting Daemon. PID=" << pid;
        exit(EXIT_SUCCESS);
    }

    //file permisions??
    umask(0);

    //Child process set to new session so it is process group leader
    pid_t sid = setsid();
    if(sid < 0)
    {
        exit(EXIT_FAILURE);
    }

    if(chdir("/") < 0)
    {
        exit(EXIT_FAILURE);
    }
    close(STDIN_FILENO);
    close(STDOUT_FILENO);
    close(STDERR_FILENO);

这是我的 inti.d 守护进程配置文件。

#! /bin/sh
### BEGIN INIT INFO
# Provides:          skeleton
# Required-Start:    $remote_fs $syslog
# Required-Stop:     $remote_fs $syslog
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Example initscript
# Description:       This file should be used to construct scripts to be
#                    placed in /etc/init.d.
### END INIT INFO

# Author: Foo Bar <[email protected]>
#
# Please remove the "Author" lines above and replace them
# with your own name if you copy and modify this script.

# Do NOT "set -e"

# PATH should only include /usr/* if it runs after the mountnfs.sh script
PATH=/sbin:/usr/sbin:/bin:/usr/bin
DESC="my daemon"
NAME=mydaemon
DAEMON=/usr/sbin/$NAME
DAEMON_ARGS=""
PIDFILE=/var/run/$NAME.pid
SCRIPTNAME=/etc/init.d/$NAME

# Exit if the package is not installed
[ -x "$DAEMON" ] || exit 0

# Read configuration variable file if it is present
[ -r /etc/default/$NAME ] && . /etc/default/$NAME

# Load the VERBOSE setting and other rcS variables
. /lib/init/vars.sh

# Define LSB log_* functions.
# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
. /lib/lsb/init-functions

#
# Function that starts the daemon/service
#
do_start()
{
    for i  in 0 1 2 3 4 5
    do
        if [ "$(pidof mysqld)" ]
        then
            sleep 2
            break
        else
            sleep 2
        fi
    done


    # Return
    #   0 if daemon has been started
    #   1 if daemon was already running
    #   2 if daemon could not be started
    start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
        || return 1
    start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
        $DAEMON_ARGS \
        || return 2
    # Add code here, if necessary, that waits for the process to be ready
    # to handle requests from services started subsequently which depend
    # on this one.  As a last resort, sleep for some time.
}

#
# Function that stops the daemon/service
#
do_stop()
{
    # Return
    #   0 if daemon has been stopped
    #   1 if daemon was already stopped
    #   2 if daemon could not be stopped
    #   other if a failure occurred
    start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
    RETVAL="$?"
    [ "$RETVAL" = 2 ] && return 2

    # Wait for children to finish too if this is a daemon that forks
    # and if the daemon is only ever run from this initscript.
    # If the above conditions are not satisfied then add some other code
    # that waits for the process to drop all resources that could be
    # needed by services started subsequently.  A last resort is to
    # sleep for some time.
    start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
    [ "$?" = 2 ] && return 2
    # Many daemons don't delete their pidfiles when they exit.
    rm -f $PIDFILE
    return "$RETVAL"
}

#
# Function that sends a SIGHUP to the daemon/service
#
do_reload() {
    #
    # If the daemon can reload its configuration without
    # restarting (for example, when it is sent a SIGHUP),
    # then implement that here.
    #
    start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
    return 0
}

case "$1" in
  start)
    [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
    do_start
    case "$?" in
        0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
        2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
    esac
    ;;
  stop)
    [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
    do_stop
    case "$?" in
        0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
        2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
    esac
    ;;
  status)
       status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
       ;;
  #reload|force-reload)
    #
    # If do_reload() is not implemented then leave this commented out
    # and leave 'force-reload' as an alias for 'restart'.
    #
    #log_daemon_msg "Reloading $DESC" "$NAME"
    #do_reload
    #log_end_msg $?
    #;;
  restart|force-reload)
    #
    # If the "reload" option is implemented then remove the
    # 'force-reload' alias
    #
    log_daemon_msg "Restarting $DESC" "$NAME"
    do_stop
    case "$?" in
      0|1)
        do_start
        case "$?" in
            0) log_end_msg 0 ;;
            1) log_end_msg 1 ;; # Old process is still running
            *) log_end_msg 1 ;; # Failed to start
        esac
        ;;
      *)
        # Failed to stop
        log_end_msg 1
        ;;
    esac
    ;;
  *)
    #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
    echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
    exit 3
    ;;
esac

:

Answer 1

这对我有用：

开始）
echo“开始$NAME”
启动-停止-守护进程 --start -m --quiet -b --pidfile $PIDFILE --exec $DAEMON >> $日志|| 1号出口
;;
停止）
echo“正在停止$NAME”
启动-停止-守护进程 --stop --pidfile $PIDFILE || 1号出口
;;;

无法让日志记录与上述内容一起使用，但这与启动-停止-守护进程有关