ColdFusion 9 will install much easier on Windows Server 2008. Also it will support the 64-bit mode that you are running in. You could also run the 32-bit version which may be required if you are running any cfx extensions that don't support 64-bit.
Well... you would need to do is install ColdFusion on the new server. Since the site is running version 7 currently you may want to stick with that. The current production release is 9.01. You may want to test the site against current version and if all is well upgrade to that.
From there you would have to configure ColdFusion server. Get any datasources configured and secure the server. These are just a few of the things you will need to do. This is not indicative of ColdFusion, but a necessary process any time you are moving a site from server to server.
If you have never done it before I would suggest getting help from someone who has. While it can be fairly easy to do there may be little nuances that a novice may miss.
我同意 Dave 的评论，如果您之前没有这样做过，我建议您向熟悉 ColdFusion 的人寻求帮助。
如果您有任何其他具体问题，请随时询问...
A few other things to keep in mind. Depending on how complex the site is you will need to move the CustomTags and any CFC's in use from the old server to the new server and in some cases these will by in the CFusion directory not in inetpub.
I would echo Dave's comments in that if you haven't done this before I would recommend getting some help from someone who is familiar with ColdFusion.
If you have any other specific questions ask away...
发布评论
评论（3）
ColdFusion 9 将在 Windows Server 2008 上安装得更加容易。此外，它将支持您正在运行的 64 位模式。您还可以运行 32 位版本，如果您正在运行任何不支持的 cfx 扩展，则可能需要该版本。支持64位。
以下是来自 咕噜日记。
ColdFusion 9 will install much easier on Windows Server 2008. Also it will support the 64-bit mode that you are running in. You could also run the 32-bit version which may be required if you are running any cfx extensions that don't support 64-bit.
Here's some good info from Diary of a Grunt.
嗯...您需要做的就是在新服务器上安装 ColdFusion。由于该网站当前运行的是版本 7，您可能希望坚持使用该版本。当前的生产版本是 9.01。您可能想针对当前版本测试该网站，如果一切顺利则升级到该版本。
从那里您必须配置 ColdFusion 服务器。配置所有数据源并保护服务器。这些只是您需要做的一些事情。这并不代表 ColdFusion，而是每次将站点从一个服务器移动到另一个服务器时的必要过程。
如果您以前从未这样做过，我建议您向做过的人寻求帮助。虽然这可能相当容易做到，但新手可能会忽略一些细微差别。
——戴夫
Well... you would need to do is install ColdFusion on the new server. Since the site is running version 7 currently you may want to stick with that. The current production release is 9.01. You may want to test the site against current version and if all is well upgrade to that.
From there you would have to configure ColdFusion server. Get any datasources configured and secure the server. These are just a few of the things you will need to do. This is not indicative of ColdFusion, but a necessary process any time you are moving a site from server to server.
If you have never done it before I would suggest getting help from someone who has. While it can be fairly easy to do there may be little nuances that a novice may miss.
--Dave
还有一些其他事情需要记住。根据站点的复杂程度，您需要将 CustomTags 和任何正在使用的 CFC 从旧服务器移动到新服务器，在某些情况下，这些将位于 CFusion 目录中而不是 inetpub 中。
我同意 Dave 的评论，如果您之前没有这样做过，我建议您向熟悉 ColdFusion 的人寻求帮助。
如果您有任何其他具体问题，请随时询问...
A few other things to keep in mind. Depending on how complex the site is you will need to move the CustomTags and any CFC's in use from the old server to the new server and in some cases these will by in the CFusion directory not in inetpub.
I would echo Dave's comments in that if you haven't done this before I would recommend getting some help from someone who is familiar with ColdFusion.
If you have any other specific questions ask away...