Acer Iconia A500 不在 adb 设备中
刚刚拿起一台 Iconia A500（是的，优惠券优惠 100 美元）并开始玩游戏等。
我决定终于到了工作的时间，启动 adb 并启动 eclipse 来测试一个应用程序，我发现它不在我的应用程序中设备列表。我已经尝试安装 acer 驱动程序。它在我的 Program Files 目录中放置了一个文件夹...但我不知道我应该在那里做什么。有“EUUDriverInstaller”，但是当我单击它时（似乎）没有发生任何事情。
当我插入设备时，它使用一些通用的 Microsoft 驱动程序来显示设备内容，但复合 adb 根本不会像我的 Droid 那样显示。
我已经在设备和笔记本电脑上重新启动了几次。 我已经卸载/重新安装了创建该驱动程序目录的应用程序。 我在 x64 文件夹下的驱动程序目录中打开了一个应用程序，它打开了 Windows 驱动程序安装程序并安装了一些驱动程序...但当我插入它时仍然没有复合 adb。 它在 USB 调试上，我已经打开和关闭了它。
正在运行 3.1 库存 我在 x64 Windows 7 上，
两个命令提示符 adb devices 在“附加设备列表”下都是空的，并且 Eclipse 设备都是空的。 我的sdk已经完全更新了。
Just picked up an Iconia A500 (yay $100 off coupon) and started messing with it playing games, etc.
I decided it was finally time to work, fired up adb and launched eclipse to test an app and I discovered it wasn't in my devices list. I've tried installing the acer drivers. It puts a folder in my Program Files directory...but I don't see what I'm supposed to do there. There's "EUUDriverInstaller" but when I click on it nothing (seems to) happens.
When I plug the device in it uses some generic Microsoft driver to show the device contents but composite adb doesn't show up at all like it does for my Droid.
I've reboot several times on both device and laptop.
I've uninstalled / reinstalled the application that made that driver directory.
I opened an application in the driver directory under the x64 folder and it opened up the windows driver installer and installed some drivers...but still no composite adb when I plug it in.
It is on usb debugging and I've toggled it on and off.
It's running 3.1 stock
I'm on x64 Windows 7
Both command prompt adb devices is empty under "List of devices attached" and Eclipse devices is empty.
My sdk is fully updated.
如果你对这篇内容有疑问，欢迎到本站社区发帖提问 参与讨论，获取更多帮助，或者扫码二维码加入 Web 技术交流群。
绑定邮箱获取回复消息
由于您还没有绑定你的真实邮箱，如果其他用户或者作者回复了您的评论，将不能在第一时间通知您！
发布评论
评论（12）
Vista 上的 Acer Iconia A510 也存在同样的问题。解决如下：
运行驱动程序安装程序会解压所有文件，然后删除它们而不安装
单击“下一步”或“确定”之前的每一点
目录
直到它询问您是否要告诉它去哪里查找，然后
Same problem with
Acer Iconia A510 on Vista.Resolved as follows:
Running the driver installer unpacks all the files, then deletes them without installing
each point before clicking 'Next' or 'ok'
directory
till it asks if you want to tell it where to look
还有另一组症状，还有另一个答案......
A500 使用 3.2 rom（我有其他 4.x 设备，所以我保存了这个）。使用 Windows 8。下载并安装 Acer 1.06 驱动程序。之前已从 android-sdk\extras\google\usb_driver\amd64（或 i386，如果合适的话）安装了适用于 Nexus 7 的 Google ADB 驱动程序，但这可能不是必需的。
插入 A500，然后启动设备管理器。 Acer Iconia Tab A500 设备显示在“其他设备”文件夹中，但未安装驱动程序。单击设备，单击“更新驱动程序”。选择“浏览我的计算机”。单击“让我从计算机上的设备驱动程序列表中进行选择”。从该列表中选择“Android 设备”。选择“Google”作为制造商，然后选择“Android ADB Interface”作为模型。单击“下一步”。单击“是的，真的，真的请这样做”。完毕。
编辑：
在 Windows 8.1 上，行为又有所不同。该设备将显示在“Android 设备”文件夹中。右键单击它，然后按照上述步骤选择并安装“Android ADB Interface”驱动程序。我必须对我的所有设备执行此操作。 Windows 8.1 似乎安装了除 ADB 驱动程序之外的所有内容，您需要使用此过程强制安装该驱动程序。
Yet another set of symptoms, and another answer....
A500 using 3.2 roms (I have other 4.x devices, so I'm saving this one). Using Windows 8. Downloaded and installed the Acer 1.06 drivers. Have previously isntalled Google ADB drivers for the Nexus 7 from android-sdk\extras\google\usb_driver\amd64 (or i386 if that's appropriate), but that may not be required.
Plug in the A500, and launch device manager. The Acer Iconia Tab A500 device shows up in "Other Devices" folder but with no drivers installed. Click on the device, click on "Update Driver". Select "Browse my Computer". Click "Let me pick from a list of device drivers on my computer". From that list, select "Android Device". Select "Google" as manufacturer, and select "Android ADB Interface" as the Model. CLick "next". Click "Yes really, really do it please". Done.
Edit:
On windows 8.1, the behavior is different again. The device will show up in the "Android Device" folder. Right click on that, and proceed as described above to select and isntall the "Android ADB Interface" driver. I'm having to do this with all my devices. Windows 8.1 seems to istall everything BUT the ADB driver, which you need to forcibly install using this procedure.
我通过这种方式解决了同样的问题：连接设备，启动设备管理器，找到丢失的设备驱动程序，选择更新驱动程序并浏览包含 acer 驱动程序的文件夹。
I have solved the same problem by this way: connect your device, start Device Manager, find missing device driver, select update driver and browse the folder with acer drivers.
Acer A500 驱动程序可在此处获取：
http://www.acer.com .au/ac/en/AU/content/drivers
（选择平板电脑 > Iconia > A500）
直接链接：
http://global-download.acer.com/GDFiles/Driver/USB/USB_Acer_1.06.1500_A30H_A.zip?acerid=634387730 136042972&Step1=平板电脑&Step2=ICONIA%20Tab&Step3=A500&OS=a05&LC=en&BC=Acer&SC=PA_6
The Acer A500 drivers are available here:
http://www.acer.com.au/ac/en/AU/content/drivers
(Select Tablets > Iconia > A500)
Direct link:
http://global-download.acer.com/GDFiles/Driver/USB/USB_Acer_1.06.1500_A30H_A.zip?acerid=634387730136042972&Step1=Tablet&Step2=ICONIA%20Tab&Step3=A500&OS=a05&LC=en&BC=Acer&SC=PA_6
Acer Iconia A100 不允许在 Win7 - Android 3.2.1 上进行 USB 调试 - 无疑与上述 A500 存在类似问题。
启用USB调试，连接到Win7 x64 - “adb devices”找不到平板电脑，DDMS也找不到，我需要它来截屏（不想root平板电脑）。
这里的人们是对的：Win 7 一心一意地为这款平板电脑使用自己的驱动程序，Acer 安装程序只需将文件拖放到驱动器上即可。事实上，它将它们放到驱动器上，然后看到 Windows 驱动程序已经就位，高兴地删除了从安装程序中复制的 Win7 驱动程序。我在设备管理器中花了一个小时试图让 Win7 使用 Acer 驱动程序，但它一直告诉我它们不兼容。
我的解决方案：
1. 连接平板电脑后运行设备管理器。
2.更新驱动软件。
3. 浏览我的计算机以查找驱动程序软件
4. 让我从列表中选择...
5. 选择USB 复合设备。
Win7 坚持认为 A100 是 MTP USB 设备，无论这意味着什么。
最后，我告诉Win7敲沙子，选择“USB复合设备”。立即“adb devices”找到了它。
啊啊啊。我可以再次使用 DDMS。
Acer Iconia A100 won't allow USB debugging on Win7 - Android 3.2.1 - No doubt a similar problem to the A500 described above.
USB debugging enabled, connected to Win7 x64 - "adb devices" would not find the tablet, nor would DDMS, which I need for screenshots (don't want to root the tablet).
Folks here are right: Win 7 is single-minded about using its own driver for this tablet, and the Acer installer simply drops the files onto the drive. In fact, it drops them onto the drive, then seeing that the Windows driver is already in place, happily deletes the Win7 drivers it has copied out of the installer. I spent an hour in Device Manager trying to con Win7 into using the Acer drivers, but it kept telling me they were not compatible.
MY SOLUTION:
1. Run Device Manager with tablet attached.
2. Update driver software.
3. Browse my computer for driver software
4. Let me pick from a list...
5. Select USB Composite Device.
Win7 insists that the A100 is a MTP USB device, whatever that means.
Finally, I told Win7 to pound sand and selected "USB Composite Device". Immediately "adb devices" found it.
Ahhhh. I can DDMS again.
我在 Windows 8 上遇到了同样的问题。安装程序对我不起作用，并且由于实际的驱动程序安装程序打包在 EXE 中，因此您无法手动安装。修复方法如下：
ACER ICONA 3G DRIVER INSTALL .msi文件。我找不到安装程序手动复制 msi 的位置，因此我使用 sysinternals 实用程序handle.exe来告诉我安装程序打开了哪些文件。handle -p "ICONIA TAB USB DRIVER SETUP.exe"I had this same problem on Windows 8. The installer did not work for me, and since the actual drivers installer comes packed in an EXE so you can't install manually. Here's how to fix:
ACER ICONA 3G DRIVER INSTALL .msifile. I couldn't find where the installer was copying the msi manually, so I used the sysinternals utilityhandle.exeto tell me which files the installer had open.handle -p "ICONIA TAB USB DRIVER SETUP.exe"不幸的是，一次又一次的插入（一次又一次？）对我没有帮助。切换USB端口也没有帮助我。
我真的花了三天时间搜索了很多帖子才解决这个问题。
只是回来与那些遇到同样难题的人分享:)
参考：通过 TCP 通过 ADB 连接到 Android
上述说明需要一台可以通过 USB ADB 到平板电脑的 PC。
更好的解决方法是首先root您的设备，然后下载adbWireless，
因此，即使根本没有 USB 连接，您也可以将平板电脑切换到 ADB TCP 模式。
哈！
Unfortunately, plug again and again (and again?) didn't help me.. neither did switching usb ports..
It really took me 3 days search quite a lot of post threads to solve the problem.
Just come back to share with those stopped by the same puzzle :)
Reference: Connect to Android with ADB over TCP
The above instruction requires a PC which can ADB to your tablet over usb.
Better work-around is root your device firstly, and then download a adbWireless,
so you can switch your tablet to ADB TCP mode even without USB connection at all.
HTH!
只需更改 USB 端口，对我有用:-)
Just change USB ports, worked for me :-)
我可能是错的，但你可能必须 root Iconia 才能获得 ADB。今晚晚些时候我会尝试这个，然后再回来查看。
http://www.addictivetips.com/移动/如何root-acer-iconia-a500-honeycomb-tablet/
编辑
弄清楚了，您需要从他们的网站 (http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=3851) 获取 ACER USB 驱动程序。安装后它对我有用。
I could be wrong, but you may have to root the Iconia to get ADB. I will be trying this later tonight and I will check back.
http://www.addictivetips.com/mobile/how-to-root-acer-iconia-a500-honeycomb-tablet/
EDIt
Figured it out, you need the ACER USB driver from their website (http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=3851). Installing that got it working for me.
其他答案都不适合我，但它为我指明了正确的方向。我必须破解类似于 的驱动程序http://www.davinciunltd.com/2011/10/hacking-the-adb-usb-driver-for-acer-a500/，然后手动指向被黑 inf 的驱动程序。
我的设备硬件 ID 和 inf 文件与链接中的有点不同，但总体思路是这样的。请注意，acer 驱动程序的 x86 / x64 文件夹对应于您的操作系统版本，而不是您系统上的 android sdk 版本。我使用的是 Windows 7 64 位，所以我使用了 C:\Program Files (x86)\Acer Inc\ACER ICONIA TAB\Win7\ADB\x64\android_usb.inf 下的那个
None of the other answers worked for me, but it pointed me in the right direction. I had to hack the drivers similar to http://www.davinciunltd.com/2011/10/hacking-the-adb-usb-driver-for-acer-a500/ and then manually point the drivers to the hacked inf.
My device hardware ID and the inf file were a bit different from the ones in the link but the general idea is there. Note that the x86 / x64 folders for the acer driver correspond to your operating system version, not the version of android sdk on your system. I'm on Windows 7 64-bit so I used the one under C:\Program Files (x86)\Acer Inc\ACER ICONIA TAB\Win7\ADB\x64\android_usb.inf
对于 Windows 7：
就我而言，我只需进入设备管理器 ->便携式设备 -> Acer ICONIA TAB A100 右键单击鼠标并更新驱动程序，然后将安装复合设备。并出现 Android USB 设备。
祝你好运！
For Windows 7:
In my case I just go to Device Manager -> Portable Devices -> Acer ICONIA TAB A100 right click on mouse and Update Driver, after that Compound Device will be installed. And Android USB Devices appear.
Good luck!
这就是我在 Windows 7 上解决问题的方法
1- 我打开设备管理器，右键单击便携式设备下的“B1-A71”，然后单击更新驱动程序软件。
2- 单击浏览我的计算机以获取驱动程序软件。
3- 单击“让我从计算机的设备驱动程序列表中选择”。
4- 它将自动安装 USB 驱动程序，但要使其使用 andoid ecplics 进行检测，您需要从以下位置安装驱动程序http://www.acer.co.in/ac/en/IN /内容/驱动程序
（在所有步骤中保持设备连接）
This is how i solved the issue on windows 7
1- I open device manager and right click on 'B1-A71' under portable devices and click update driver software.
2- Click on browse my computer for driver software.
3- Click let me pick from a list of device driver from my computer.
4- It will install the usb driver automatically but to make it detect with andoid ecplics you need to install the driver from http://www.acer.co.in/ac/en/IN/content/drivers
(keep the device connected for all steps)