缺少 LabVIEW 驱动程序
我正在尝试在 LabVIEW 中运行别人编写的程序。该程序记录电压。但是它无法打开，因为它缺少子VI。
最初我以为只有一个丢失了，其余的都无法工作，因为它们附加在它上面，但是在这个论坛上的某人好心地为我找到它之后，其余的 VI 仍然无法工作，所以我想我需要下载它们再次。然而，它们太多了，无法单独获取，我也尝试用谷歌搜索它们，但无济于事。
子VI是：磁铁ID，硬件检查，绘制数据和打印，制作绘图标签，绘制它，重新标记它，写入文件头，记录模拟信息，修复列标题，制作Igor标签等（这不是完整列表）。
我觉得我应该从 National Instruments 网站下载一个 DAQ，但我不确定是哪一个。我在 Windows 上使用 64 位 LabVIEW 2010。有人可以帮我选择正确的驱动程序吗？ 谢谢！
I'm trying to run a program written by someone else in LabVIEW. The program records voltage. However it won't open because it is missing subVIs.
Initially I thought that only one was missing and the rest weren't working becuase they were attached to it but after someone on this forum kindly found it for me the rest of the VIs still won't work so I think I need to download them again. However there are too many off them to get separately, also I tried googling them to no avail.
The subVIs are : Magnet Id, Hardware check, Plot Data and Print, Make Plot Lables, Plot it, Relabel It, Write File header, Record Analog Info, Fix Column Heading, Make Igor Label etc etc (this is not a complete list).
I feel that I should download a DAQ from The National Instruments Website but I am not sure which one. I am using 64 bit LabVIEW 2010 on Windows. Can someone please help me pick out the correct driver?
Thanks!
如果你对这篇内容有疑问，欢迎到本站社区发帖提问 参与讨论，获取更多帮助，或者扫码二维码加入 Web 技术交流群。
绑定邮箱获取回复消息
由于您还没有绑定你的真实邮箱，如果其他用户或者作者回复了您的评论，将不能在第一时间通知您！
发布评论
评论（2）
凭记忆来看，这些不是我所认识的 NI VI，特别是如果原文中存在拼写错误的话。
该接口与什么硬件连接？
您应该仍然能够打开主 VI。它不会编译或运行，因为子 VI 丢失，但您应该能够打开它，并可能获得一些有关它正在做什么的线索。
Just going from memory, those aren't NI VIs that I recognize, especially if the misspellings are in the original.
What hardware is this interfacing with?
You should still be able to open the main VI. It will not compile or run, since the subVIs are missing, but you should be able to open it and maybe get some clues about what it's doing.
子VI似乎都在llb文件中，因此它们应该可用。我不确定如何直接从 llb 文件访问子 VI，因此您可能希望将其转换为项目文件夹（我认为这是自版本 8 以来创建库的新方法）。 NI 网站上的一些页面可能会有所帮助，请尝试 将 LLB 转换为项目库，然后将此项目库添加到您的项目中。
据我所知，VI 使用 VISA 驱动程序与各个仪器进行通信，因此您应该确保已安装该驱动程序。你没有提到你有什么版本的LabVIEW 2010，但我认为它们甚至应该提供基本版本，我知道它们是随专业开发系统版本一起提供的。
The SubVIs all appear to be in the llb file so they should be available. I'm not sure how you can access the subVIs directly from the llb file so you may want to convert this to a project folder (this is the new way of creating libraries since version 8 I think). There are some pages on the NI website that may help, try Converting an LLB to a Project Library and then add this Project Library to your project.
From what I can see the VIs make use of the VISA drivers to communicate with the individual instruments so you should make sure you have this installed. You don't mention what version of LabVIEW 2010 you have but I think they should be provided even the Basic version, I know they are provided with the Professional Development System version.