适用于 ARM M3 STM32F103ZD 的.net Micro
我对此很陌生，但我想为微控制器 ARM M3 STM32F103ZD 开发 C# .net Micro 应用程序。
我找到了开发套件STM32F103ZE ARM-CM3 Board，链接http://www.embedinfo。 com/en/list.asp?id=31
谁能告诉我，是否可以在此套件上开发 C# .net 微型应用程序。
谢谢
I'm new to this, but I'd like to develop C# .net Micro apps for microcontroller ARM M3 STM32F103ZD.
I found development kit STM32F103ZE ARM-CM3 Board, link http://www.embedinfo.com/en/list.asp?id=31
Can anyone tell me, if it's possible to develop C# .net Micro apps on this kit.
Thanks
如果你对这篇内容有疑问，欢迎到本站社区发帖提问 参与讨论，获取更多帮助，或者扫码二维码加入 Web 技术交流群。
绑定邮箱获取回复消息
由于您还没有绑定你的真实邮箱，如果其他用户或者作者回复了您的评论，将不能在第一时间通知您！
发布评论
评论（2）
它看起来像 LinkSprite 使用非常接近的变体 STM32F103ZE 并使其 .NET Micro Framework 固件可用于 下载，包括 3.1 .NET MF 的源代码。这至少应该使移植工作变得更容易。
It looks like LinkSprite uses a very close variant, the STM32F103ZE and makes their .NET Micro Framework firmware available for download, including sourcecode for the 3.1 .NET MF. This should at least make the porting job easier.
这很可能是可能的，如果您没有找到适合您的硬件的.NET Micro Framework 的现成端口，那么也可能需要做一些工作。如果您找不到端口，则必须花一些时间使用 .NET Micro Framework 4.0 移植套件，下载页面特别提到了 Cortex 处理器。
但是，如果您不需要该板上的任何明确内容，那么从
It is likely to be possible, it is also likely to be a bit of work if you don't find a ready made port of .NET Micro Framework for your hardware. If you don't find a port you have to spend a while with the .NET Micro Framework 4.0 Porting Kit, the download page is specifically mentioning Cortex processors.
But if you don't need any explicit stuff from that board it might be easier to order one of the kits from the Turnkey Hardware site, the Fez kits seems to be fairly popular.