在工作组中的计算机和不同域中的笔记本电脑上使用 Synergy
所以，我最近安装了 Synergy，因为我厌倦了使用两个鼠标和键盘。问题是，设置不起作用。首先，设置。
Server:
Desktop
Windows 7 64 - on our home network, part of Workgroup: WORKGROUP
Client:
work issued laptop
Windows XP SP2 32 - on home network, part of workd Domain: DOMAIN
服务器已设置，所有计算机名称均正确。我在网络方面有点菜鸟，我不想再次弄乱我的工作笔记本电脑的配置（我已经将域切换到我的工作组，糟糕）。因此，请提出任何不太疯狂的建议，因为它是公司笔记本电脑。
我也尝试过在客户端上输入IP，防火墙允许使用正在使用的端口，只是无法让它工作。我认为我对工作组/域的差异感到满意......
So, I recently installed synergy because I was tired of using two mice and keyboards. Problem is, set up is not working. First, the setup.
Server:
Desktop
Windows 7 64 - on our home network, part of Workgroup: WORKGROUP
Client:
work issued laptop
Windows XP SP2 32 - on home network, part of workd Domain: DOMAIN
Server is set up, all the computer names are correct. I'm a bit of a noob at networking things, and I don't want to mess up the configuration of my work laptop again (I already switched the domain to my workgroup, BAD). So, any suggestions that aren't too crazy please, since it's a company laptop.
I've tried putting in the ip on the client as well, firewall is allowing on the port in use, just can't get it to work. I think I'm SOL with the Workgroup/Domain difference though...
如果你对这篇内容有疑问，欢迎到本站社区发帖提问 参与讨论，获取更多帮助，或者扫码二维码加入 Web 技术交流群。
绑定邮箱获取回复消息
由于您还没有绑定你的真实邮箱，如果其他用户或者作者回复了您的评论，将不能在第一时间通知您！
发布评论
评论（2）
据我所知，Synergy 并不关心工作组和/或域，它只需要能够与服务器/客户端 IP 进行通信。您是否尝试手动插入客户端/服务器的IP？
From what I remember, Synergy doesn't care about the workgroup and/or domain, it just needs to be able to communicate with the server/client IPs. Did you try to manually insert IPs of client/server?
在非常类似的情况下，我发现当尝试使用其工作组名称 ping 我的非域桌面时，dns 解析器会将工作域附加到桌面名称。因此，当我尝试与 IP 地址协同时，我成功连接了两台计算机。
我可以提供的唯一警告是，您可能需要将应用程序添加到两台计算机的 Windows 防火墙例外列表中。我假设两台计算机之间的端口设置相同（默认为 24800），在这种情况下，您应该只使用 IP 地址，因为应用程序知道通过高级配置中的该设置访问 24800。
如果您愿意通过 Windows 防火墙，您可以将该程序添加到白名单或特别是端口。附带说明 - 我还使用旧版本的 synergy （1.3.1），而不是此答案的最新版本（1.4.2 Beta），这对我不起作用，但我假设这是因为我的服务器正在运行1.3.1.
我选择不更新所有 6 台机器及其各自可怕的配置结构，而 Synergy 喜欢将这些结构强加给我们。 [注意...咆哮：x 在 y 的左边，y 在 x 的右边...真的吗？你确定爱因斯坦吗？协同作用至少可以推断出那一点逻辑，而不是要求它！]
希望有所帮助。
In a very similar situation I discovered that when trying to ping my non-domain desktop with its workgroup name the dns resolver was appending the work domain to the desktops name. So when I tried synergy with an IP address I successfully connected the two computers.
The only caveat I can offer is maybe you needed to add the application to the windows firewall exception list for both machines. I would assume the port setting was the same between the two computers (default is 24800) in which case you should only use the IP address because the application knows to access 24800 via that setting in the advanced configuration.
You can add the program to the whitelist or specifically the port if you prefer via the Windows Firewall. On a side note - I am also using an older version of synergy (1.3.1) and not the latest as of this answer (1.4.2 Beta) which did not work for me, but I will assume it's because my server was running 1.3.1.
I chose not to update all 6 machines and their respective horrific configuration constructs that synergy loves to enforce upon us. [caution... rant: x is left of y and y is right of x... really? are you sure about that Einstein? Synergy could at least INFER that bit of logic instead of REQUIRING it!]
Hope that helps.