If netbooks are not used much by your users, so you just need your software to work on them rather than to be nice, you could enable AutoScroll on the Form/Dialog, or use a one or more Panel controls with AutoScroll enabled.
You will then need to check the screan size and set the size of the dialog to be no bigger then the screan before showing it.
发布评论
评论（4）
您可能想查看此线程：
Windows 窗体解析问题
You might want to look at this thread:
Windows Forms resolution problem
您应该问的问题是..
我真的需要同时显示所有表单字段吗？
如果没有，如何将其分解为子组并将每个组放在单独的选项卡上？
我同意 @p.campbell 要求截图。
The question that you should be asking is..
Do I really need to have all of the form fields displayed at the same time?
If not, how about breaking it down into sub-groups and placing each group onto a separate tab?
I second @p.campbell in asking for a screenshot.
也许尝试重新设计你的对话。也许考虑：
Perhaps take a stab at redesigning your dialog. Perhaps consider:
如果您的用户不经常使用上网本，因此您只需要软件能够在上网本上工作而不是变得很好，您可以启用 在表单/对话框上自动滚动，或使用一个或多个 启用自动滚动的面板 控件。
然后，您需要检查屏幕大小并将对话框的大小设置为不大于屏幕，然后再显示它。
If netbooks are not used much by your users, so you just need your software to work on them rather than to be nice, you could enable AutoScroll on the Form/Dialog, or use a one or more Panel controls with AutoScroll enabled.
You will then need to check the screan size and set the size of the dialog to be no bigger then the screan before showing it.