如何打开 Windows 防火墙 (VISTA) 的出站流量以允许计算机查看网络驱动器？
我有一台必须安装防火墙的计算机（Vista）。此外，（从管理角度）强制规定，在防火墙属性下，出站连接将被阻止。默认为“允许”。然而，我希望这台计算机能够看到网络驱动器。我尝试通过转至出站规则、选择新规则->预定义并打开网络发现、文件和打印机共享、核心网络来打开各种内容。我看不到网络驱动器。作为健全性检查，我已禁用防火墙并验证一切正常。此外，将默认出站连接设置为“允许”也是可行的。
关于这个具体问题有什么想法吗？有关于 Vista 的 Windows 防火墙的教程吗？我见过一些，但它们都是基本的。他们当然不会解决这个问题。 谢谢。
I have a computer (Vista) that has to have a firewall on it. Furthermore, it's imposed (from management) that under Firewall properties, the Outbond connections are blocked. The default is "Allow". I would, however, like this computer to be able to see networked drives. I have tried opening up various things by going to Outbound Rules, picking New Rule->Predefined and turning on Network Discovery, File and Printer Sharing, Core Networking. I can't see the networked drive. As a sanity check, I have disabled the firewall and verified that all is well. Also, setting the default outbound connection to "allow" works.
Any ideas on this specific problem? Any tutorials on Windows Firewall for Vista? I've seen a few but they are basic. They certainly don't address this problem.
Thanks.
如果你对这篇内容有疑问，欢迎到本站社区发帖提问 参与讨论，获取更多帮助，或者扫码二维码加入 Web 技术交流群。
绑定邮箱获取回复消息
由于您还没有绑定你的真实邮箱，如果其他用户或者作者回复了您的评论，将不能在第一时间通知您！
发布评论
评论（1）
谢谢。我终于明白了这一点。如果有人从现在开始查看这几个月的内容，请注意以下关键细节：
计算机已设置为使用“专用”而不是“域”或“公共”设置。因此，在具有高级安全性的 Windows 防火墙中，我确保核心网络、文件和打印机共享以及网络发现都已打开。我通过单击“出站规则”，然后选择“操作”->“新规则”->“预定义”，然后选择相关类别来完成此操作。此外，对于所有的文件&打印共享类别，对于标记为“私有”的配置文件，将远程地址设置为“任意”。最后，我更改了规则，CoreNetworking – 组策略(TCP-OUT) 和 CoreNetworking – 组策略(N-OUT)。我将配置文件从“域”更改为“任意”。
很可能，我开放的事情超出了我需要的范围。
谢谢。
Thanks. I finally figured this out. In case someone looks at this months from now, here's the key details:
The computer had already been setup to use a "private" as opposed to "domain" or "public" setting. Thus in Windows Firewall w/ Advanced Security I made sure that CoreNetworking, File and Printer Sharing, and Network Discovery we're all opened up. I did this by clicking on "Outbound Rules", and picking Action->New Rule->Predefined and then the relevant category. Further, for all of the File & Print Sharing category, for the Profiles marked Private, set the remote address to “Any”. Finally, I changed the rules, CoreNetworking – Group Policy(TCP-OUT) and CoreNetworking – Group Policy(N-OUT). I changed the Profile from Domain to Any.
Quite possibly, I opened up things more than I needed to.
Thanks.