只有 Made for iPod 计划中的设备才能通过 30 针底座连接器与 iPhone 通信。这些设备还需要发布一个协议，以便应用程序通过外部附件框架访问它们。通用 USB 存储设备无法满足这一要求，据我所知，没有任何 Made for iPod 配件是 USB 存储设备或允许访问它们。
Only devices in the Made for iPod program can communicate to the iPhone via the 30-pin dock connector. These devices also need to publish a protocol for applications to access them via the External Accessory framework. Generic USB storage devices will not satisfy this, and I know of no Made for iPod accessories that either are USB storage devices or allow access to them.
可以通过修改您的 iPhone USB 电缆并在 30 针 iphone 底座电缆上的数据传输引脚正极添加一个 10 欧姆电阻，该 10 欧姆电阻应添加到 30 针底座电缆上的引脚 27（请记住，引脚 30 实际上是引脚 1，引脚 1 是 30。为什么会这样，我无法理解，但它会使修改变得复杂），并且还将 iPhone 电缆的 USB 端修改为母头，从而能够接收 USB 记忆棒或闪存驱动器。
It is possible by modifying your iphone USB cable and adding a 10 ohms resister on the positive of the data transfer pin on the 30 pin iphone dock cable, the 10 ohms resister should be added to pin 27 on the 30 pin dock cable ( remember that the pin 30 is really pin 1 and pin 1 is 30. Why that is, is beyond me but it can complicate the modification ) and also modifying the USB end of your iPhone cable to a female, enabling to recieve a USB stick or flash drive.
发布评论
评论（3）
只有 Made for iPod 计划中的设备才能通过 30 针底座连接器与 iPhone 通信。这些设备还需要发布一个协议，以便应用程序通过外部附件框架访问它们。通用 USB 存储设备无法满足这一要求，据我所知，没有任何 Made for iPod 配件是 USB 存储设备或允许访问它们。
Only devices in the Made for iPod program can communicate to the iPhone via the 30-pin dock connector. These devices also need to publish a protocol for applications to access them via the External Accessory framework. Generic USB storage devices will not satisfy this, and I know of no Made for iPod accessories that either are USB storage devices or allow access to them.
仅当该 USB 闪存驱动器被设计为 iPod/iPhone 配件时。
Only if that USB Flash drive was designed to be an iPod/iPhone accessory.
可以通过修改您的 iPhone USB 电缆并在 30 针 iphone 底座电缆上的数据传输引脚正极添加一个 10 欧姆电阻，该 10 欧姆电阻应添加到 30 针底座电缆上的引脚 27（请记住，引脚 30 实际上是引脚 1，引脚 1 是 30。为什么会这样，我无法理解，但它会使修改变得复杂），并且还将 iPhone 电缆的 USB 端修改为母头，从而能够接收 USB 记忆棒或闪存驱动器。
It is possible by modifying your iphone USB cable and adding a 10 ohms resister on the positive of the data transfer pin on the 30 pin iphone dock cable, the 10 ohms resister should be added to pin 27 on the 30 pin dock cable ( remember that the pin 30 is really pin 1 and pin 1 is 30. Why that is, is beyond me but it can complicate the modification ) and also modifying the USB end of your iPhone cable to a female, enabling to recieve a USB stick or flash drive.