如何配置接入点和 dhcp 范围？
我有一台 Thomson ST585V6 路由器和 2 个 TRENDnet TEW-636APB 无线接入点。我有 3 台设备需要静态 IP 地址。所有其他设备都需要通过 DHCP 分配其 IP 地址。以下是我所做的：
在需要静态 IP 的 3 个设备中，我分配了静态 IP 192.168.1.64、192.168.1.65 和 192.168.1.66。然后我将静态 IP 分配给两个接入点 192.168.1.67 和 192.168.1.68。我还为此接入点设置了 DHCP 服务器，其 DHCP 池地址为
- 192.168.1.100 - 192.168.1.150（其中之一）
- 192.168.1.151 - 192.168.1.200（另一个），
然后我将 DHCP 池地址从 192.168.1.69 分配到 192.168。我的 Thomson 路由器为 1.200。
现在一切都运转良好。我的问题是我不确定接入点上的 DHCP 范围如何工作。他们是否知道 Thompson 路由器上的 DHCP 池？是否有可能一个接入点分配 0.100，Thomson 路由器也是如此？这当然一点也不好，因为有些设备会相互通信。
让 2 个接入点通过 DHCP 从 Thompson 路由器获取 IP 并将 Thomson 路由器作为唯一的 DHCP 服务器是最佳选择吗？你会怎么办？。先感谢您。
I have a Thomson ST585V6 router and 2 TRENDnet TEW-636APB Wireless Access Points. And I have 3 devices that need a static IP address. All the other devices need to have their IP adreess assigned with DHCP. Here is what I did:
In each of the 3 devices that need static IP I assigned the static IPs 192.168.1.64, 192.168.1.65 and 192.168.1.66. Then I assigned statics IPs to the two access points 192.168.1.67 and 192.168.1.68. I also made this access points DHCP Servers with DHCP pool addresses
- 192.168.1.100 - 192.168.1.150 (one of them)
- 192.168.1.151 - 192.168.1.200 (the other one)
I then assigned my DHCP pool addresses from 192.168.1.69 to 192.168.1.200 for my Thomson router.
Right now everything is working just fine. My question is I am not quire sure how is the DHCP range on the access points working. Are they aware of the DHCP pool on the Thompson router?, is it possible that one access point assigns .100 and so does the Thomson router?. This of course would not be good at all, since some devices communicate with each other.
Is the best option to have the 2 Access Points get their IP via DHCP from the Thompson Router and having as the only DHCP server the Thomson Router?. What would you do?. Thank you in advance.
如果你对这篇内容有疑问，欢迎到本站社区发帖提问 参与讨论，获取更多帮助，或者扫码二维码加入 Web 技术交流群。
绑定邮箱获取回复消息
由于您还没有绑定你的真实邮箱，如果其他用户或者作者回复了您的评论，将不能在第一时间通知您！
发布评论
评论（1）
我想通了。我决定只使用一台 dhcp 服务器并为所有设备分配静态地址。
I figured this out. I decided to have only one dhcp server and assign all devices static addresses.