RAD - Websphere 应用程序服务器无法启动
我在使用 RAD7 时遇到问题。
我的服务器今天不会启动。我在家工作并连接到 VPN。除了我在 RAD 中的服务器外，一切正常。昨天在工作中它工作得很好，之前我在家时也工作得很好，但那是几周前的事了。
有什么我应该注意的设置吗？我已禁用 RAD 中的代理设置并关闭防火墙中的所有内容。我可以 ping 服务器连接到的所有数据库。
我什至已经从服务器中删除了所有项目，但它仍然无法启动。它不断尝试，然后在 300 秒后超时。
有什么建议吗？
I am having issues with RAD7.
My server will not start for me today. I am working from home and connected to the VPN. Everything works except my server in RAD. It worked fine yesterday in work and had previously worked when I was at home but that was a few weeks ago.
Are there any settings that I should look out for? I have disabled my proxy settings in RAD and turned off everything in my firewall. I can ping all the DBs that the server is connecting to.
I have even removed all the projects from the server and it will still not start. It keeps trying and then times out after 300s.
Any suggestions?
如果你对这篇内容有疑问，欢迎到本站社区发帖提问 参与讨论，获取更多帮助，或者扫码二维码加入 Web 技术交流群。
绑定邮箱获取回复消息
由于您还没有绑定你的真实邮箱，如果其他用户或者作者回复了您的评论，将不能在第一时间通知您！
发布评论
评论（6）
我在启动 WebSphere Commerce 服务器 v7 时遇到类似的错误。在我的例子中，这个错误是由于我将最大堆大小增加到 2096 引起的。我将堆大小减少到 1536 并且它起作用了。没有错误/跟踪文件表明此问题。
I got a similar error while Starting WebSphere Commerce server v7. This error in my case was caused by me increasing the Maximum Heap size to 2096. I reduced the heap size to 1536 and it worked. None of the errors/trace files indicated this problem.
我也有这个问题。双击服务器打开服务器“概述”选项卡/视图。向下滚动到“优化服务器启动以进行开发：”下的部分；取消选中“使用生成的脚本启动服务器”。这对我有用。祝你好运。
I had this problem too. Double-click on the server to open the server 'OVERVIEW' tab/view. Scroll down to the section under 'Optimize server start for development:'; uncheck 'Start server with a generated script'. This worked for me. good luck.
我以前曾经遇到过这个问题。我无法弄清楚出了什么问题，但删除该服务器并创建一个新服务器（在“窗口”->“首选项”->“服务器”->“WebSphere Application Server”下）解决了问题。
I have had this problem once before. I wasn't able to figure out what went wrong, but deleting that server and creating a new one (under Window -> Preferences -> Server -> WebSphere Application Server) fixed the problem.
重新发现文件未找到异常。确保Windows中的目录路径为CoRRectCase，例如GALFTGA342130Node01Cell-> galftga342130Node01Cell。我在各种 RAD 安装中都遇到过这种情况。
Re the file not found exception. Make sure the directory path in Windows is of the CoRRectCase, e.g., GALFTGA342130Node01Cell-> galftga342130Node01Cell. I've encountered this on various RAD installations.
参考您的以下评论 -
此链接可能会帮助您理解该问题。它说 -
您应该为您的用户设置适当的权限。
With reference to your following comment -
this link may help you in understanding the problem. it says -
You should set appropriate permissions for your user.
在我的案例中工作了几个小时后，我找到了解决方案，希望它对您有用；将我的 JDK 更改为备用 JRE
after working several hours in my case I found the solution I hope it works for you ; change my JDK to alternate JRE