USBCELL 可充电电池 - 使用 USB 端口充电
这些电池不久前就出现了，物有所值，在我的观点。
我搜索了专门用于监控USBCELL电池电量的软件，但一无所获。有一些 USB 端口监视器程序可能会以某种方式关联，但它们也可能不相关。
不管怎样..
是否可以编写一个程序来告诉您 USBCELL 插入并充电时的电池电量？
EDIT
If it makes any difference, the batteries have status lights that turn on when plugged in.
There is nothing to install (optional or required) to get these to work.
USBCELL rechargeable batteries - charged using the USB port
These came out a while back and are worth the money, in my opinion.
I searched for software specifically made to monitor the battery level of USBCELL batteries and got nothing. There are some USB port monitor programs out there which might tie in somehow, but they could be unrelated also.
Anyway..
Is it possible to write a program that tells you the battery level of the USBCELL when its plugged in and is charging?
EDIT
If it makes any difference, the batteries have status lights that turn on when plugged in.
There is nothing to install (optional or required) to get these to work.
发布评论
评论（3）
它的 USBCELL 人在这里 是的
，常规版本具有嵌入式电路，尽管我们确实制作了特殊的 USBCELL 版本（目前主要用于企业），该版本带有品牌并具有可下载的 USB 充电监视器 - 可以携带交叉促销/折扣代码。这是可编程的，但在一般零售版本中不是。常规包也可以为活动打上品牌，www.usbcell.com/customize.php
同时，还有一个专门为游戏玩家设计的圣诞 USBCELL 包 - http://www.usbcell.com/product/13 非常适合作为礼物
问候
USBCELL环保人
its USBCELL man here
Yes regular versions have embedded circuitry, though we do make a special USBCELL version (mainly currently for corporates), that is branded and has a downloadable USB charge monitor - that can carry cross promotions/discount codes. This is programmable, but not in the general retail version. Regular packs can also be branded for events, www.usbcell.com/customize.php
In the meantime, there is a special christmas USBCELL pack for gamers - http://www.usbcell.com/product/13 which is great for gifts
regards
USBCELL EcoMan
我没有这些电池，也没有使用过它们，但最有可能的情况是电池内部有内部电路决定是否从 USB 端口获取电源。
“普通”电池充电器的工作原理相同：
如果有电但电池未充电，则取电给电池充电；
否则不汲取电力。
因此，您不太可能监控电池的电压，因为电池没有理由通过 USB 与计算机上游“通信”。
I don't have these batteries, nor have I used them, but the most likely situation is that there is internal circuitry inside the batteries that decides whether to pull power from the USB port.
A "normal" battery charger works the same way in that:
if there is power and the battery is not charged, draw power to charge the battery;
else do not draw power.
So, it is quite unlikely that you'll be able to monitor the battery's voltage, as there should be no reason for the battery to "communicate" upstream to the computer via USB.
除非这些电池有专有协议来传达其状态，否则你就不走运了。
标准规范 (E/O/UHCI) 不提供除“端口电源”位之外的任何信息来指示硬件正在向端口供电（不是由设备供电）。
一些嵌入式系统提供更广泛的信息，但它来自定制的板载逻辑。 （通常是连接到 USB 端口的电源电路，而不是实际 USB 控制器的一部分）。
USB 电池充电 2.0 规范应该解决这些问题。但支持它的产品还需要相当长的一段时间才能上市。
如果您确实找到了窍门，请随时通知我们！
Unless these batteries have a proprietary protocol to communicate their status, you are out of luck.
The standard specifications (E/O/UHCI) do not provide for any information beyond the "Port Power" bits to indicate that the hardware is supplying power to the port (not if its being drawn by the device).
Some embedded systems offer more extensive information, but it comes from custom on board logic. (Usually a power circuit connected to the USB port, and not part of the actual USB controller).
The USB Battery Charging 2.0 specification, should address these issues. But it will be quite a while before products supporting it hit the market.
If you do find a trick, keep us posted !