我很快将在费城的 Code Camp 上发表关于持续集成的演讲。我没有熔岩灯、环境球或其他任何东西的经验 - 但我认为这将是对演示的一个很好的补充，激发热情。
谁能推荐一款非常易于设置/使用的设备，我可以快速购买和炫耀？如果可能的话，我希望有一些可以通过 USB 连接的东西，因为网络或无线等最多只能是不稳定的。
我将使用 CruiseControl.NET 和/或 Hudson 以及 MSBuild。
谢谢！
I'm going to be doing a talk at Code Camp in Philly soon on Continuous Integration. I have no experience with lava lamps, ambient orbs, or whatever - but I think that would be a great addition to the demo, driving enthusiasm.
Can anyone please recommend a very easy to setup/use device that I could purchase and show off quickly? I'm hoping for something that hooks up via USB if possible, since networking or wireless and such will be spotty at best.
I'm going to be using CruiseControl.NET and/or Hudson, with MSBuild.
Thanks!
发布评论
评论（6）
Pragmatic Automation 的 lavalamp 是我的最爱。
The lavalamp from Pragmatic automation is my favorite.
Nabaztagtag 兔子岩石。它有一个很好的 API 和 看起来不错。
或者构建墙板。
Nabaztagtag rabbit rocks. It has a nice API and looks good.
Or a Build Wallboard.
本文提供了通过串行或 USB 输出巡航控制构建状态的讨论和代码。这些零件很便宜，而且组装起来看起来并不困难。
This article provides a discussion and the code to output Cruise Control build status via serial or USB. The parts are cheap and it doesn't look too difficult to put together.
Hudson 和 Nabaztag 插件 ://www.nabaztag.com/" rel="nofollow noreferrer">Nabaztag 在我看来是最简单的解决方案。
对于熔岩灯，您需要一些详细信息，请参阅 Hudson 建造状态熔岩灯，但这看起来很容易。
最后，您可能需要检查 DIYOrb 条目在小介的博客上。
There is an Nabaztag Plugin for Hudson and Nabaztag is IMO the easiest solution.
For Lava Lamps, you'll need a bit of stuff as detailed in Hudson Build Status Lava Lamps but it seems pretty easy.
Finally, you might want to check the DIYOrb entry on Kohsuke's blog.
如果您有使用 Linux 的用户（在 MS 商店中的可能性较小），他们可能会喜欢 tux droid
< a href="http://www.kysoh.com/media-en/img-2873.jpg" rel="nofollow noreferrer">Tux Droid http://www.kysoh.com/media-en/img-2873 .jpg
If you've got Linux people (maybe less likely in an MS shop) they might like the tux droid
Tux Droid http://www.kysoh.com/media-en/img-2873.jpg
我最终得到的是一个很棒的、非常易于设置和使用的 x10 解决方案。您可以从 agiletoys.com 获取整个设置。这些人非常乐意与您合作，并在您需要时提供帮助。但说实话，这很简单：
1）购买他们的套餐。
2) 设置cctray。
3) 破坏构建并看到灯熄灭:)
因为它是 x10，所以您不需要任何 wifi 或网络或订阅或任何东西。您将需要一个串行端口。就我而言，我只有 USB，所以我使用了 IOGear 的 USB 串行转换器，它在 Windows 2008 64 位下运行得很好（使用您必须下载的 Vista 64 驱动程序）。
What I have ended up with is a great, very easy to setup and use x10 solution. You can get the whole setup from agiletoys.com. These guys are great to work with and provide help if you need. But honestly it was very easy:
1) Buy their package.
2) Setup cctray.
3) Break a build and see the lights go off :)
Since it's x10, you don't need any wifi or network or subscription or anything. You will need a serial port. In my case I only had USB, so I used the USB-Serial converter from IOGear and it works just fine under Windows 2008 64bit (using their Vista 64 drivers you have to download).