windows xp下命令提示符最大化的方法
我在 Windows XP 上，
有什么方法可以最大化我的 cmd.exe 窗口吗？
我正在做一些 mysql，在这么小的窗口中读取查询结果非常困难。
为什么最大化并没有真正最大化它？ 有没有办法最大化？ 或者也许我可以使用替代命令提示符？
谢谢
I am on windows xp,
Is there any way to maximize my cmd.exe window?
I am doing some mysql and it is so difficult to read results of my queries in such a small window.
Why maximize does not really maximizes it?
Is there a way for maximizing?
Or maybe an alternative command prompt I can use?
thanks
如果你对这篇内容有疑问，欢迎到本站社区发帖提问 参与讨论，获取更多帮助，或者扫码二维码加入 Web 技术交流群。
绑定邮箱获取回复消息
由于您还没有绑定你的真实邮箱，如果其他用户或者作者回复了您的评论，将不能在第一时间通知您！
发布评论
评论（6）
我建议您使用 powershell
http://www.microsoft.com /windowsserver2003/technologies/management/powershell/download.mspx
它还支持全屏模式，以及其他一些不错的功能。
I would recommand that you use powershell
http://www.microsoft.com/windowsserver2003/technologies/management/powershell/download.mspx
It also support full screen mode, and some other nice feature.
命令窗口默认属性
单击系统菜单，或者将焦点置于命令窗口上，按 Alt+空格键，然后选择属性。更改字体、窗口大小等。我总是将窗口大小（在布局选项卡上）更改为宽度 80 x 高度 65，将屏幕缓冲区大小更改为 80 x 300。
Command Window Default Properties
Click on the sytem menu, or with focus set on the Command Windows, press Alt+Space, and select Properties. Change your Font, Window Size, and so on. I always change my Window Size (on the Layout tab) to Width 80 by Height 65 and Screen Buffer Size to 80 by 300.
查看Console2，它似乎是最有前途的窗口增强功能对于cmd.exe。
不得不说，cmd.exe可能是windows中最糟糕的部分了！特别是复制粘贴支持等。就
我个人而言，当我确实需要执行命令行工作时，我使用 putty 来 ssh 到 Linux 机器，你不能超越 Bash。
即使您可以使用 Cygwin 在 Windows 上安装它，这将允许您使用另一个控制台，尽管这并不没有能力覆盖 Windows cmd.exe，考虑到您正在尝试使用命令行应用程序而不是 Windows，它可能值得一试。
Check out Console2, it seems to be about the most promising window enhancement for cmd.exe.
I have to say, cmd.exe is probably the worst part of windows! Especially the copy pasting support, etc.
Personally, I use putty to ssh into a Linux box when I really need to do command line work, you can't go past Bash.
Even though you could install that on windows using Cygwin, which will allow you to use another console, although this doesn't have the ability to override the windows cmd.exe, it might be worth a shot given that you are trying to use a command line application, and not windows :).
通过右键单击 CMD 窗口顶部访问属性，返回“字体”选项卡，选择 10 x 18 或 12 x 16，然后单击“确定”。然后，您需要返回“布局”选项卡并将“屏幕缓冲区大小宽度”重置为适当的值。例如，我选择了 10 x 18 字体大小，然后将屏幕缓冲区大小宽度更改为 160X300，将窗口大小宽度更改为 134X37。
Access Properties by right clicking on top of the CMD window, go back to the Font tab, select either 10 x 18 or 12 x 16, and then click OK. You'll then need to go back to the Layout tab and reset the Screen Buffer Size Width to the appropriate value. For example, I selected the 10 x 18 font size and then changed the Screen Buffer Size Width to 160X300 and window size width to 134X37.
单击窗口左上角的图标（
“C:\”图标）并选择“属性”。然后选择“布局”选项卡并将窗口大小更改为您想要的大小（我的屏幕尺寸为 128x50，滚动缓冲区为 128x999）。如果您不希望 Windows 自己决定窗口的位置，您还可以选择设置左上角位置（我总是将其设置为 1,1）。
当您单击“确定”时，请确保告诉它修改启动窗口的快捷方式。
然后它就会记住。
这是针对 XP 的，其他 MS 操作系统可能略有不同，但总体思路应该是相同的。
Click on the top left icon in the window (the
"C:\"one) and select "Properties".Then select the "Layout" tab and change the window size to what you want it to be (I have 128x50 for the screen and 128x999 for the scroll buffer). You can also optionally set the top left position (I always have it at 1,1) if you don't want Windows itself deciding where the window goes.
When you click on OK, make sure you tell it to modify the shortcut that started the window.
Then it will remember.
This is for XP, other MS operating systems may vary slightly but the general idea should be the same.
试试这个：
在命令窗口中，右键单击标题
栏并从
弹出菜单。财产表
出现。
在属性表中，选择“完整”
“显示选项”中的“屏幕”
框。
通过单击关闭属性表
确定并选择“保存属性”
未来的窗口具有相同的标题'。
Try this:
In the Command window, right click the Title
bar and select Properties from the
popup menu. The property sheet
appears.
In the property sheet, select 'Full
Screen' in the 'Display Options'
box.
Close the property sheet by clicking
OK and select 'Save proeprties for
future windows with same title'.