我正在运行 Google 地图应用程序，它是 Palm Emulator 的一部分。 启动应用程序时，它显示“Google 地图需要互联网连接”。 当我运行模拟器时，我需要配置网络设置吗？
当我在浏览器中输入某个网址时，会发生类似的情况，它显示“错误加载页面 2028”。
我假设模拟器将采用运行模拟器的 PC LAN 设置来访问互联网。
有人可以帮忙并突出显示一些相同的信息吗？
谢谢，
I am running the Google Map application which is part of Palm Emulator. On launching the application , it displays "Google Maps requires internet connection". When i run emulator, do I need to configure the network settings .
Similar thing happens when i enter some url in the browser its says " Error Loading Page 2028".
I assumed that emulator will the take the pc Lan setting on which the emulator is running to access to internet.
Can someone help and highlight some info on the same ??
Thanks,
发布评论
评论（2）
我遇到了这个问题，并通过 novacom 进入模拟器并更新 /etc/resolv.conf 到正确的名称服务器来解决它。 由于某种原因，它没有正确设置。
要检查这是否是您的问题，请尝试（从您的 root 模拟器） ping “google.com”，然后尝试仅 ping 它的 IP。 如果后者有效但前者无效，则这是您的问题。
您可以检查“ip route show”的输出，并使用显示的默认网关作为名称服务器进行设置。
此外，模拟器设置应默认为 NAT，因此不需要，正如其他海报所示，不需要额外的配置。
I ran into this problem and solved it by rooting into the emulator via novacom, and updating /etc/resolv.conf to a proper nameserver. For some reason it hadn't set that correctly.
To check if this is your problem, try (from your rooted emulator) pinging "google.com", and then try pinging just its IP. If the latter works but not the former, this is your issue.
You can check the output of "ip route show" and use the default gateway shown as the nameserver to set it to.
Also, the emulator setup should default to NAT, so no, extra configuration should not be required as indicated by other poster.
Palm Pre 模拟器在 Sun 的 VirtualBox 之上运行。 如果模拟器从一开始就无法连接到互联网或任何现有网络，您应该浏览文档以及有用的HOWTO以及解释如何在 VirtualBox 上设置不同类型网络的教程。
The Palm Pre Emulator works atop Sun's VirtualBox. If the emulator is not able to connect to the Internet or any existing network from the get-go, you should skim through the documentation provided on the VirtualBox site as well as the helpful HOWTOs and tutorials that explain how to set up different kinds of networking on VirtualBox.