如何拦截 MKMapView 或 UIWebView 对象上的触摸事件？

Question

我不确定我做错了什么，但我尝试捕捉 MKMapView 对象上的触摸。 我通过创建以下类对其进行子类化：

#import <UIKit/UIKit.h>
#import <MapKit/MapKit.h>

@interface MapViewWithTouches : MKMapView {

}

- (void) touchesBegan:(NSSet *)touches withEvent:(UIEvent *) event;   

@end

和实现：

#import "MapViewWithTouches.h"
@implementation MapViewWithTouches

- (void) touchesBegan:(NSSet *)touches withEvent:(UIEvent *) event {

    NSLog(@"hello");
    //[super touchesBegan:touches   withEvent:event];

}
@end

但看起来当我使用此类时，我在控制台上看不到任何内容：

MapViewWithTouches *mapView = [[MapViewWithTouches alloc] initWithFrame:self.view.frame];
[self.view insertSubview:mapView atIndex:0];

知道我做错了什么吗？

Answer 1

我发现实现这一目标的最佳方法是使用手势识别器。 其他方法被证明涉及大量黑客编程，这些编程不完美地复制了苹果的代码，特别是在多点触控的情况下。

这就是我所做的：实现一个无法阻止且无法阻止其他手势识别器的手势识别器。 将其添加到地图视图中，然后根据您的喜好使用gestureRecognizer的touchesBegan、touchesMoved等。

如何检测 MKMapView 内的任何点击（无技巧）

WildcardGestureRecognizer * tapInterceptor = [[WildcardGestureRecognizer alloc] init];
tapInterceptor.touchesBeganCallback = ^(NSSet * touches, UIEvent * event) {
        self.lockedOnUserLocation = NO;
};
[mapView addGestureRecognizer:tapInterceptor];

WildcardGestureRecognizer.h

//
//  WildcardGestureRecognizer.h
//  Copyright 2010 Floatopian LLC. All rights reserved.
//

#import <Foundation/Foundation.h>

typedef void (^TouchesEventBlock)(NSSet * touches, UIEvent * event);

@interface WildcardGestureRecognizer : UIGestureRecognizer {
    TouchesEventBlock touchesBeganCallback;
}
@property(copy) TouchesEventBlock touchesBeganCallback;


@end

WildcardGestureRecognizer.m

//
//  WildcardGestureRecognizer.m
//  Created by Raymond Daly on 10/31/10.
//  Copyright 2010 Floatopian LLC. All rights reserved.
//

#import "WildcardGestureRecognizer.h"


@implementation WildcardGestureRecognizer
@synthesize touchesBeganCallback;

-(id) init{
    if (self = [super init])
    {
        self.cancelsTouchesInView = NO;
    }
    return self;
}

- (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event
{
    if (touchesBeganCallback)
        touchesBeganCallback(touches, event);
}

- (void)touchesCancelled:(NSSet *)touches withEvent:(UIEvent *)event
{
}

- (void)touchesEnded:(NSSet *)touches withEvent:(UIEvent *)event
{
}

- (void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)event
{
}

- (void)reset
{
}

- (void)ignoreTouch:(UITouch *)touch forEvent:(UIEvent *)event
{
}

- (BOOL)canBePreventedByGestureRecognizer:(UIGestureRecognizer *)preventingGestureRecognizer
{
    return NO;
}

- (BOOL)canPreventGestureRecognizer:(UIGestureRecognizer *)preventedGestureRecognizer
{
    return NO;
}

@end

SWIFT 3

let tapInterceptor = WildCardGestureRecognizer(target: nil, action: nil)
tapInterceptor.touchesBeganCallback = {
    _, _ in
    self.lockedOnUserLocation = false
}
mapView.addGestureRecognizer(tapInterceptor)

WildCardGestureRecognizer.swift

import UIKit.UIGestureRecognizerSubclass

class WildCardGestureRecognizer: UIGestureRecognizer {

    var touchesBeganCallback: ((Set<UITouch>, UIEvent) -> Void)?

    override init(target: Any?, action: Selector?) {
        super.init(target: target, action: action)
        self.cancelsTouchesInView = false
    }

    override func touchesBegan(_ touches: Set<UITouch>, with event: UIEvent) {
        super.touchesBegan(touches, with: event)
        touchesBeganCallback?(touches, event)
    }

    override func canPrevent(_ preventedGestureRecognizer: UIGestureRecognizer) -> Bool {
        return false
    }

    override func canBePrevented(by preventingGestureRecognizer: UIGestureRecognizer) -> Bool {
        return false
    }
}

Answer 2

经过一天的披萨、尖叫之后，我终于找到了解决方案！ 井井有条！

Peter，我使用了你上面的技巧，并对其进行了一些调整，最终得到了一个与 MKMapView 完美配合的解决方案，并且也应该与 UIWebView 配合使用

MKTouchAppDelegate.h

#import <UIKit/UIKit.h>
@class UIViewTouch;
@class MKMapView;

@interface MKTouchAppDelegate : NSObject <UIApplicationDelegate> {
    UIWindow *window;
    UIViewTouch *viewTouch;
    MKMapView *mapView;
}
@property (nonatomic, retain) UIViewTouch *viewTouch;
@property (nonatomic, retain) MKMapView *mapView;
@property (nonatomic, retain) IBOutlet UIWindow *window;

@end

MKTouchAppDelegate.m

#import "MKTouchAppDelegate.h"
#import "UIViewTouch.h"
#import <MapKit/MapKit.h>

@implementation MKTouchAppDelegate

@synthesize window;
@synthesize viewTouch;
@synthesize mapView;


- (void)applicationDidFinishLaunching:(UIApplication *)application {

    //We create a view wich will catch Events as they occured and Log them in the Console
    viewTouch = [[UIViewTouch alloc] initWithFrame:CGRectMake(0, 0, 320, 480)];

    //Next we create the MKMapView object, which will be added as a subview of viewTouch
    mapView = [[MKMapView alloc] initWithFrame:CGRectMake(0, 0, 320, 480)];
    [viewTouch addSubview:mapView];

    //And we display everything!
    [window addSubview:viewTouch];
    [window makeKeyAndVisible];


}


- (void)dealloc {
    [window release];
    [super dealloc];
}


@end

< strong>UIViewTouch.h

#import <UIKit/UIKit.h>
@class UIView;

@interface UIViewTouch : UIView {
    UIView *viewTouched;
}
@property (nonatomic, retain) UIView * viewTouched;

- (UIView *)hitTest:(CGPoint)point withEvent:(UIEvent *)event;

- (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event;
- (void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)event;
- (void)touchesEnded:(NSSet *)touches withEvent:(UIEvent *)event;
- (void)touchesCancelled:(NSSet *)touches withEvent:(UIEvent *)event;

@end

UIViewTouch.m

#import "UIViewTouch.h"
#import <MapKit/MapKit.h>

@implementation UIViewTouch
@synthesize viewTouched;

//The basic idea here is to intercept the view which is sent back as the firstresponder in hitTest.
//We keep it preciously in the property viewTouched and we return our view as the firstresponder.
- (UIView *)hitTest:(CGPoint)point withEvent:(UIEvent *)event {
    NSLog(@"Hit Test");
    viewTouched = [super hitTest:point withEvent:event];
    return self;
}

//Then, when an event is fired, we log this one and then send it back to the viewTouched we kept, and voilà!!! :)
- (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event {
    NSLog(@"Touch Began");
    [viewTouched touchesBegan:touches withEvent:event];
}
- (void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)event {
    NSLog(@"Touch Moved");
    [viewTouched touchesMoved:touches withEvent:event];
}

- (void)touchesEnded:(NSSet *)touches withEvent:(UIEvent *)event {
    NSLog(@"Touch Ended");
    [viewTouched touchesEnded:touches withEvent:event];
}

- (void)touchesCancelled:(NSSet *)touches withEvent:(UIEvent *)event {
    NSLog(@"Touch Cancelled");
}

@end

我希望这会对你们中的一些人有所帮助！

干杯

Answer 3

UITapGestureRecognizer *tgr = [[UITapGestureRecognizer alloc]initWithTarget:self action:@selector(handleGesture:)];   
tgr.numberOfTapsRequired = 2;
tgr.numberOfTouchesRequired = 1;
[mapView addGestureRecognizer:tgr];
[tgr release];


- (void)handleGesture:(UIGestureRecognizer *)gestureRecognizer
{
    if (gestureRecognizer.state != UIGestureRecognizerStateEnded)
        return;

    CGPoint touchPoint = [gestureRecognizer locationInView:mapView];
    CLLocationCoordinate2D touchMapCoordinate = [mapView convertPoint:touchPoint toCoordinateFromView:mapView];

    //.............
}

Answer 4

对于 MKMapView 来说，真正可行的解决方案是手势识别！

当我拖动地图或捏合缩放时，我想停止更新我所在位置的地图中心。

因此，创建手势识别器并将其添加到 mapView ：

- (void)viewDidLoad {

    ...

    // Add gesture recognizer for map hoding
    UILongPressGestureRecognizer *longPressGesture = [[[UILongPressGestureRecognizer alloc] initWithTarget:self action:@selector(handleLongPressAndPinchGesture:)] autorelease];
    longPressGesture.delegate = self;
    longPressGesture.minimumPressDuration = 0;  // In order to detect the map touching directly (Default was 0.5)
    [self.mapView addGestureRecognizer:longPressGesture];

    // Add gesture recognizer for map pinching
    UIPinchGestureRecognizer *pinchGesture = [[[UIPinchGestureRecognizer alloc] initWithTarget:self action:@selector(handleLongPressAndPinchGesture:)] autorelease];
    pinchGesture.delegate = self;
    [self.mapView addGestureRecognizer:pinchGesture];

    // Add gesture recognizer for map dragging
    UIPanGestureRecognizer *panGesture = [[[UIPanGestureRecognizer alloc] initWithTarget:self action:@selector(handlePanGesture:)] autorelease];
    panGesture.delegate = self;
    panGesture.maximumNumberOfTouches = 1;  // In order to discard dragging when pinching
    [self.mapView addGestureRecognizer:panGesture];
}

查看 UIGestureRecognizer 类参考 查看所有可用的手势识别器。

因为我们已经将委托定义为 self，所以我们必须实现协议 UIGestureRecognizerDelegate ：

typedef enum {
    MapModeStateFree,                    // Map is free
    MapModeStateGeolocalised,            // Map centred on our location
    MapModeStateGeolocalisedWithHeading  // Map centred on our location and oriented with the compass
} MapModeState;

@interface MapViewController : UIViewController <CLLocationManagerDelegate, UIGestureRecognizerDelegate> {
    MapModeState mapMode;
}

@property (nonatomic, retain) IBOutlet MKMapView *mapView;
...

并重写方法gestureRecognizer：gestureRecognizer shouldRecognizeSimultaneouslyWithGestureRecognizer：以便允许同时识别多个手势，如果我理解正确的话：

// Allow to recognize multiple gestures simultaneously (Implementation of the protocole UIGestureRecognizerDelegate)
- (BOOL)gestureRecognizer:(UIGestureRecognizer *)gestureRecognizer shouldRecognizeSimultaneouslyWithGestureRecognizer:(UIGestureRecognizer *)otherGestureRecognizer {
    return YES;
}

现在编写将由我们的手势识别器：

// On map holding or pinching pause localise and heading
- (void)handleLongPressAndPinchGesture:(UIGestureRecognizer *)sender {
    // Stop to localise and/or heading
    if (sender.state == UIGestureRecognizerStateBegan && mapMode != MapModeStateFree) {
        [locationManager stopUpdatingLocation];
        if (mapMode == MapModeStateGeolocalisedWithHeading) [locationManager stopUpdatingHeading];
    }
    // Restart to localise and/or heading
    if (sender.state == UIGestureRecognizerStateEnded && mapMode != MapModeStateFree) {
        [locationManager startUpdatingLocation];
        if (mapMode == MapModeStateGeolocalisedWithHeading) [locationManager startUpdatingHeading];
    }
}

// On dragging gesture put map in free mode
- (void)handlePanGesture:(UIGestureRecognizer *)sender {
    if (sender.state == UIGestureRecognizerStateBegan && mapMode != MapModeStateFree) [self setMapInFreeModePushedBy:sender];
}

Answer 5

以防万一有人尝试像我一样做同样的事情：我想在用户点击的位置创建注释。 为此，我使用了 UITapGestureRecognizer 解决方案：

UITapGestureRecognizer *tapGestureRecognizer = [[UITapGestureRecognizer alloc] initWithTarget:self action:@selector(didTapOnMap:)];
[self.mapView addGestureRecognizer:tapGestureRecognizer];
[tapGestureRecognizer setDelegate:self];

- (void)didTapOnMap:(UITapGestureRecognizer *)gestureRecognizer
{
    CGPoint point = [gestureRecognizer locationInView:self.mapView];
    CLLocationCoordinate2D coordinate = [self.mapView convertPoint:point toCoordinateFromView:self.mapView];
    .......
}

但是，当我点击注释时，也会调用 didTapOnMap: 并创建一个新注释。 解决方案是实现 UIGestureRecognizerDelegate：

- (BOOL)gestureRecognizer:(UIGestureRecognizer *)gestureRecognizer shouldReceiveTouch:(UITouch *)touch
{
    if ([touch.view isKindOfClass:[MKAnnotationView class]])
    {
        return NO;
    }
    return YES;
}

Answer 6

您可能需要覆盖一个透明视图来捕获触摸，就像通常使用基于 UIWebView 的控件所做的那样。 地图视图已经通过触摸完成了一系列特殊的操作，以便允许地图移动、居中、缩放等......消息不会被冒泡到您的应用程序中。

我能想到的另外两个（未经测试的）选项：

1）通过 IB 辞职第一响应者并将其设置为“文件所有者”以允许文件所有者响应触摸。 我怀疑这是否有效，因为 MKMapView 扩展了 NSObject，而不是 UIView，因此触摸事件仍然可能无法传播给您。

2) 如果您想在地图状态发生变化时捕获（例如缩放时），只需实现 MKMapViewDelegate 协议来侦听特定事件。 我的预感是，这是您轻松捕获某些交互的最佳机会（缺少在地图上实现透明视图的功能）。 不要忘记将容纳 MKMapView 的视图控制器设置为地图的委托 (map.delegate = self)。

祝你好运。

Answer 7

我还没有尝试过，但是 MapKit 很可能是基于类簇的，因此对其进行子类化是困难且无效的。

我建议将 MapKit 视图设置为自定义视图的子视图，这应该允许您在触摸事件到达之前拦截它们。

Answer 8

因此，经过半天的折腾，我发现了以下内容：

1. 正如其他人发现的那样，捏合不起作用。 我尝试了子类化 MKMapView 和上面描述的方法（拦截它）。 结果是一样的。

2. 在斯坦福大学的 iPhone 视频中，一位来自苹果公司的人说，许多 UIKit 的东西都会
   如果你“转移”触摸请求（也就是上面描述的两种方法），会导致很多错误，而且你可能无法让它工作。

3. 解决方案：此处描述：拦截/劫持MKMapView的iPhone触摸事件。 基本上，您可以在任何响应者获取事件之前“捕获”该事件，并在那里对其进行解释。

Answer 9

在 Swift 3.0 中

import UIKit
import MapKit

class CoordinatesPickerViewController: UIViewController {

    @IBOutlet var mapView: MKMapView!
    override func viewDidLoad() {
        super.viewDidLoad()

        let tapGestureRecognizer = UITapGestureRecognizer(target: self, action: #selector(clickOnMap))
        mapView.addGestureRecognizer(tapGestureRecognizer)
    }

    @objc func clickOnMap(_ sender: UITapGestureRecognizer) {

        if sender.state != UIGestureRecognizerState.ended { return }
        let touchLocation = sender.location(in: mapView)
        let locationCoordinate = mapView.convert(touchLocation, toCoordinateFrom: mapView)
        print("Tapped at lat: \(locationCoordinate.latitude) long: \(locationCoordinate.longitude)")

    }

}

Answer 10

使 MKMapView 成为自定义视图的子视图，并

- (UIView *)hitTest:(CGPoint)point withEvent:(UIEvent *)event

在自定义视图中实现以返回 self 而不是子视图。

Answer 11

谢谢你的披萨和尖叫声——你节省了我很多时间。

multipletouchenabled 将偶尔工作。

viewTouch.multipleTouchEnabled = TRUE;

最后，当我需要捕获触摸时，我切换了视图（与需要捏缩放的时间点不同）：

    [mapView removeFromSuperview];
    [viewTouch addSubview:mapView];
    [self.view insertSubview:viewTouch atIndex:0];

Answer 12

我注意到您可以跟踪触摸的数量和位置，并获取视图中每个触摸的位置：

- (void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)event {
    NSLog(@"Touch Moved %d", [[event allTouches] count]);

 NSEnumerator *enumerator = [touches objectEnumerator];
 id value;

 while ((value = [enumerator nextObject])) {
  NSLog(@"touch description %f", [value locationInView:mapView].x);
 }
    [viewTouched touchesMoved:touches withEvent:event];
}

是否有其他人尝试使用这些值来更新地图的缩放级别？ 这将是记录起始位置，然后记录结束位置，计算相对差异并更新地图的问题。

我正在使用 Martin 提供的基本代码，这看起来会起作用......

Answer 13

这是我整理的，它确实允许在模拟器中进行捏缩放（尚未在真正的 iPhone 上尝试过），但我认为很好：

- (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event {
    NSLog(@"Touch Began %d", [touches count]);
 reportTrackingPoints = NO;
 startTrackingPoints = YES;
    [viewTouched touchesBegan:touches withEvent:event];
}

- (void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)event {
 if ([[event allTouches] count] == 2) {
  reportTrackingPoints = YES;
  if (startTrackingPoints == YES) {
   BOOL setA = NO;
   NSEnumerator *enumerator = [[event allTouches] objectEnumerator];
   id value;
   while ((value = [enumerator nextObject])) {
    if (! setA) {
     startPointA = [value locationInView:mapView];
     setA = YES;
    } else {
     startPointB = [value locationInView:mapView];
    }
   }
   startTrackingPoints = NO;
  } else {
   BOOL setA = NO;
   NSEnumerator *enumerator = [[event allTouches] objectEnumerator];
   id value;
   while ((value = [enumerator nextObject])) {
    if (! setA) {
     endPointA = [value locationInView:mapView];
     setA = YES;
    } else {
     endPointB = [value locationInView:mapView];
    }
   }
  }
 }
 //NSLog(@"Touch Moved %d", [[event allTouches] count]);
    [viewTouched touchesMoved:touches withEvent:event];
}

- (void) updateMapFromTrackingPoints {
 float startLenA = (startPointA.x - startPointB.x);
 float startLenB = (startPointA.y - startPointB.y);
 float len1 = sqrt((startLenA * startLenA) + (startLenB * startLenB));
 float endLenA = (endPointA.x - endPointB.x);
 float endLenB = (endPointA.y - endPointB.y);
 float len2 = sqrt((endLenA * endLenA) + (endLenB * endLenB));
 MKCoordinateRegion region = mapView.region;
 region.span.latitudeDelta = region.span.latitudeDelta * len1/len2;
 region.span.longitudeDelta = region.span.longitudeDelta * len1/len2;
 [mapView setRegion:region animated:YES];
}

- (void)touchesEnded:(NSSet *)touches withEvent:(UIEvent *)event {
 if (reportTrackingPoints) {
  [self updateMapFromTrackingPoints];
  reportTrackingPoints = NO;
 }


    [viewTouched touchesEnded:touches withEvent:event];
}

主要思想是，如果用户使用两根手指，则可以跟踪这些值。 我在 startPoints A 和 B 中记录起点和终点。然后记录当前的跟踪点，完成后，在 TouchsEnded 上，我可以调用一个例程来计算我开始的点之间的线的相对长度，以及使用简单斜边计算结束的点之间的线。 它们之间的比率就是缩放量：我将区域跨度乘以该量。

希望它对某人有用。

Answer 14

我从 MystikSpiral 的回答中采用了“覆盖”透明视图的想法，它非常适合我想要实现的目标； 快速、干净的解决方案。

简而言之，我有一个自定义的 UITableViewCell （在 IB 中设计），左侧有一个 MKMapView，右侧有一些 UILabels。 我想制作自定义单元格，这样你就可以在任何地方触摸它，这将推动一个新的视图控制器。 然而，触摸地图并没有将触摸“向上”传递到 UITableViewCell，直到我简单地在其顶部添加了一个与地图视图大小相同的 UIView（在 IB 中），并使其背景成为代码中的“清晰颜色”（不认为你可以在 IB 中设置clearColor？？）：

dummyView.backgroundColor = [UIColor clearColor];

认为它可能对其他人有帮助； 当然，如果您想为表视图单元格实现相同的行为。

Answer 15

我不明白为什么其他答案如此复杂。 解决方案实际上只有一行：

mapView.addGestureRecognizer(UITapGestureRecognizer(target: self, action: #selector(mapTapped)))

@objc func mapTapped() {}