从主机操作系统访问访客虚拟 PC 上的 VPN 连接
我正在作为我的主机操作系统运行 - Win 7 x64 并运行 Virtual PC XP 的实例。 我在 Guest XP VPC 操作系统上运行 Cisco ISPec VPN 客户端，并且可以成功连接到我公司的企业网络。
我无法在主机上运行 Cisco IPSec 客户端软件，因为它是 64 位的，Cisco 在其 IPSec 客户端产品上不支持 64 位，而且我目前在迁移到 Cisco 方面没有太多选择SSL VPN 客户端 (AnyConnect)。
XP VPC Guest OS不使用NAT网络适配器，而是使用机器的物理适配器。
当 Cisco 客户端未在 XP VPC 来宾操作系统上运行时，我可以从来宾操作系统 ping 主机，反之亦然。
几个问题：
当 Cisco 客户端运行并连接时，来宾操作系统无法再看到主机。
当 XP VPC 访客连接到 VPN 时，我希望能够从主机访问 VPN。
对于#2，我至少尝试了一种技术，如下所述：xenomorph.net/use-cisco-vpn-under-vista-x64/
此技术打开 Cisco 伪网络适配器上的 ICS。
我无法让它发挥作用。 但是，我可能错误地遵循了说明。
我还查看了： http: //www.pringle.net.nz/blog/PermaLink,guid,12ee0de7-f998-4084-8b06-537b3dbd5d9a.aspx
...这涉及使用环回适配器以及主机和来宾操作系统之间的桥接。 我没有遵循这个，因为说明并不完全清楚。
最后，我在网上看到了有关 OpenVPN x64 构建的参考资料，但我对朝这个方向前进犹豫不决。
任何人都可以引导我朝着正确的方向前进吗？
I am running as my Host OS - Win 7 x64 and running an instance of Virtual PC XP. I am running the Cisco ISPec VPN Client on the Guest XP VPC OS and can successfully connect to my company's corporate network.
I cannot run the Cisco IPSec client sw on the Host, because it is 64-bit, Cisco doesn't support 64-bit on its IPSec client products and I don't have alot of choices at the moment in terms of moving to Cisco's SSL VPN client (AnyConnect).
The XP VPC Guest OS is not using the NAT network adapter, but the physical adapter of the machine.
I can ping the Host from the Guest OS and vice versa when Cisco Client is not running on the XP VPC guest OS.
Couple of problems:
When the Cisco client is running and connected the guest OS cannot see the Host any longer.
I would like to be able to access the VPN from the Host when the XP VPC guest is connected to VPN.
For #2, I have tried at least one technique, described: xenomorph.net/use-cisco-vpn-under-vista-x64/
This technique turns on ICS on the Cisco pseudo network adapter.
I could not get this to work. I may have followed the instructions incorrectly, however.
I have also looked at: http://www.pringle.net.nz/blog/PermaLink,guid,12ee0de7-f998-4084-8b06-537b3dbd5d9a.aspx
... which involves using a Loopback adapter and bridging between the host and guest OS. I have not followed this because the instructions are not completely clear.
Lastly, I have seen references on the net regarding a x64 build of OpenVPN, but I am hesitant to go in that direction.
Can anyone steer me in the correct direction regarding what to do?
如果你对这篇内容有疑问，欢迎到本站社区发帖提问 参与讨论，获取更多帮助，或者扫码二维码加入 Web 技术交流群。
绑定邮箱获取回复消息
由于您还没有绑定你的真实邮箱，如果其他用户或者作者回复了您的评论，将不能在第一时间通知您！
发布评论
评论（1）
实际上 cisco 有适用于 windows 7 64 位的 cisco vpn 客户端，您可以在 4shared.com 上找到它，但 cisco 仍然没有适用于 windows 8 的客户端
actually cisco has cisco vpn client for windows 7 64 bit ,you can find it on 4shared.com ,but still cisco does not have client for windows 8