DB2 传输组件未正确注册
我正在尝试测试 BizTalk 2006（不是 R2）的 DB2 适配器。
尝试在应用程序中配置实例时，我收到一条错误消息：
DB2 传输组件未正确注册
环境是 2 个共享消息框的 BizTalk 服务器。
DB2 适配器在第一台服务器上工作正常。 这是我遇到问题的第二台服务器。
我已从第一台服务器导出 .msi 文件，然后将它们安装到第二台服务器上并将它们导入到 BizTalk 中。 我使用的所有其他适配器在两台服务器上都工作正常。
- Google 搜索并没有提供大量有关 BizTalk DB2 适配器故障排除的信息。
- 进一步的故障排除显示两台计算机上均安装了用于主机系统的 MS BizTalk 适配器。 但是，它仅在给我带来问题的机器上配置。
- 我已经取消了它的配置，但这仍然没有帮助。
- 我仔细检查了两台服务器上 DB2 适配器的 .dll 版本号是否相同，并确保它们安装在 GAC 中。
- 这些都没有帮助。
有没有人以前遇到过类似的问题，或者为我指出在哪里寻找 BizTalk DB2 适配器故障排除指南？
I'm trying to test the DB2 adapter for BizTalk 2006 (not R2).
While trying to configure an instance in an application, I get an error stating:
DB2 Transport Component is not registered correctly
The enivronment is 2 BizTalk servers sharing a messagebox.
The DB2 adapter works fine on the first server. It is the second server I am having problems with.
I've exported the .msi files from the first server, then installed them onto the second server and imported them into BizTalk. All of the other adapters that I'm using work fine on both servers.
- Google searches don't bring up a whole lot regarding troubleshooting the BizTalk DB2 adapter.
- Further troubleshooting has shown that MS BizTalk Adapters for Host Systems is installed on both machines. However, it was only configured on the machine that is giving me the issue.
- I've unconfigured it, but that still has not helped.
- I've double checked tht version numbers of the .dll's for the DB2 adapter are the same on both servers, and made sure that they are installed in the GAC.
- None of this has helped.
Has anyone run into an issue like this before, or point me in the direction of where to look for BizTalk DB2 adapter troubleshooting guidence?
如果你对这篇内容有疑问，欢迎到本站社区发帖提问 参与讨论，获取更多帮助，或者扫码二维码加入 Web 技术交流群。
绑定邮箱获取回复消息
由于您还没有绑定你的真实邮箱，如果其他用户或者作者回复了您的评论，将不能在第一时间通知您！
发布评论
评论（1）
当出现“注册”这个词时，我想到的是COM组件的注册，而不是.NET程序集的安装。 DB2 适配器使用的底层驱动程序是Microsoft ODBC Driver for DB2。 您可能需要检查 ODBC DSN 控制面板是否显示该特定驱动程序以供您配置 DSN。
我建议重新安装主机系统适配器包。
When the "registered" word appears, I think about the registration of COM components, not the installation of .NET assemblies. The underlying driver the DB2 adapter uses is the Microsoft ODBC Driver for DB2. You may want to check if your ODBC DSN control panel shows up that particular driver for you to configure a DSN.
I'd recommend a reinstallation for the Adapter pack for Host Systems.