HP-UX如何把FC卡的驱动从FCLP换成FCD?
现有一台11V2的机器A,装NETAPP的SANKIT要挂存储,老是找不到存储。
sanlun fcp show adapter时提示:No supported adapters are present。
最后在另外一台之前挂好存储的机器B(同样是11V2)上发现FC卡的驱动是FCD的,
用 fcdlist命令,机器B能列出FC卡出来,而机器A没有。
目前这么看,就只能是驱动类型的原因了。如果切换驱动的类型呢?
机器B
# ioscan -fnkC fc
Class I H/W Path Driver S/W State H/W Type Description
=================================================================
fc 0 0/3/1/0 fcd CLAIMED INTERFACE HP AB378-60101 4Gb Single Port PCI/PCI-X Fibre Channel Adapter (FC Port 1)
/dev/fcd0
fc 1 0/7/1/0 fcd CLAIMED INTERFACE HP AB378-60101 4Gb Single Port PCI/PCI-X Fibre Channel Adapter (FC Port 1)
/dev/fcd1
# fcdlist
/dev/fcd0 0/3/1/0.1.38.255.0.0.0 fcd_vbus 0x012600
CLAIMED DEVICE IBM 1815 FAStT /dev/rscsi/c32t0d0
/dev/fcd0 0/3/1/0.1.39.255.0.0.0 fcd_vbus 0x012700
CLAIMED DEVICE IBM 1815 FAStT /dev/rscsi/c35t0d0
/dev/fcd0 0/3/1/0.1.38.0.0 fcd_vbus 0x012600
CLAIMED DEVICE IBM 1815 FAStT /dev/dsk/c30t0d1 /dev/rdsk/c30t0d1
CLAIMED DEVICE IBM 1815 FAStT /dev/dsk/c30t0d2 /dev/rdsk/c30t0d2
CLAIMED DEVICE IBM Universal Xport /dev/dsk/c30t3d7 /dev/rdsk/c30t3d7
/dev/fcd0 0/3/1/0.1.38.0.1 fcd_vbus 0x012600
/dev/fcd0 0/3/1/0.1.39.0.0 fcd_vbus 0x012700
CLAIMED DEVICE IBM 1815 FAStT /dev/dsk/c33t0d1 /dev/rdsk/c33t0d1
CLAIMED DEVICE IBM 1815 FAStT /dev/dsk/c33t0d2 /dev/rdsk/c33t0d2
CLAIMED DEVICE IBM Universal Xport /dev/dsk/c33t3d7 /dev/rdsk/c33t3d7
/dev/fcd0 0/3/1/0.1.39.0.1 fcd_vbus 0x012700
/dev/fcd1 0/7/1/0.1.38.255.0.0.0 fcd_vbus 0x012600
CLAIMED DEVICE IBM 1815 FAStT /dev/rscsi/c38t0d0
/dev/fcd1 0/7/1/0.1.39.255.0.0.0 fcd_vbus 0x012700
CLAIMED DEVICE IBM 1815 FAStT /dev/rscsi/c41t0d0
/dev/fcd1 0/7/1/0.1.38.0.0 fcd_vbus 0x012600
CLAIMED DEVICE IBM 1815 FAStT /dev/dsk/c36t0d1 /dev/rdsk/c36t0d1
CLAIMED DEVICE IBM 1815 FAStT /dev/dsk/c36t0d2 /dev/rdsk/c36t0d2
CLAIMED DEVICE IBM Universal Xport /dev/dsk/c36t3d7 /dev/rdsk/c36t3d7
/dev/fcd1 0/7/1/0.1.38.0.1 fcd_vbus 0x012600
/dev/fcd1 0/7/1/0.1.39.0.0 fcd_vbus 0x012700
CLAIMED DEVICE IBM 1815 FAStT /dev/dsk/c39t0d1 /dev/rdsk/c39t0d1
CLAIMED DEVICE IBM 1815 FAStT /dev/dsk/c39t0d2 /dev/rdsk/c39t0d2
CLAIMED DEVICE IBM Universal Xport /dev/dsk/c39t3d7 /dev/rdsk/c39t3d7
/dev/fcd1 0/7/1/0.1.39.0.1 fcd_vbus 0x012700
# fcmsutil /dev/fcd1
Vendor ID is = 0x001077
Device ID is = 0x002422
PCI Sub-system Vendor ID is = 0x00103c
PCI Sub-system ID is = 0x0012d6
PCI Mode = PCI-X 266 MHz
ISP Code version = 4.0.91
ISP Chip version = 3
Topology = PTTOPT_FABRIC
Link Speed = 4Gb
Local N_Port_id is = 0x010d00
Previous N_Port_id is = 0x030200
N_Port Node World Wide Name = 0x5001438002525937
N_Port Port World Wide Name = 0x5001438002525936
Switch Port World Wide Name = 0x200100051eeb5969
Switch Node World Wide Name = 0x100000051eeb5969
Driver state = ONLINE
Hardware Path is = 0/7/1/0
Maximum Frame Size = 2048
Driver-Firmware Dump Available = NO
Driver-Firmware Dump Timestamp = N/A
Driver Version = @(#) libfcd.a HP Fibre Channel ISP 23xx & 24xx Driver B.11.23.08.02 /ux/core/isu/FCD/kern/src/common/wsio/fcd_init.c:Sep 24 2007,00:39:23
机器A
# ioscan -fnkC fc
Class I H/W Path Driver S/W State H/W Type Description
========================================================================
fc 0 0/3/0/0/0/0 fclp CLAIMED INTERFACE HP AD299-60001 4Gb PCIe 1-port Fibre Channel Adapter
/dev/fclp0
fc 1 0/7/0/0/0/0 fclp CLAIMED INTERFACE HP AD299-60001 4Gb PCIe 1-port Fibre Channel Adapter
/dev/fclp1
# fcmsutil /dev/fclp0
Vendor ID is = 0x10df
Device ID is = 0xfe00
PCI Sub-system Vendor ID is = 0x103c
PCI Sub-system ID is = 0x7046
Chip version = 2
Firmware Version = 2.70X5 SLI-3 (Z3D2.70X5)
EFI Version = ZE3.21A3
Driver-Firmware Dump Available = NO
Driver-Firmware Dump Timestamp = N/A
Topology = PTTOPT_FABRIC
Link Speed = 4Gb
Local N_Port_id is = 0x010000
Previous N_Port_id is = None
N_Port Node World Wide Name = 0x5001438007f72a6d
N_Port Port World Wide Name = 0x5001438007f72a6c
Switch Port World Wide Name = 0x200f00053317ebd4
Switch Node World Wide Name = 0x100000053317ebd4
Driver state = ONLINE
Hardware Path is = 0/3/0/0/0/0
Maximum Frame Size = 2048
Driver Version = @(#) FCLP: PCIe Fibre Channel driver (FibrChanl-02), B.11.23.0909, Jun 1 2009, IFC (3,1)
如果你对这篇内容有疑问,欢迎到本站社区发帖提问 参与讨论,获取更多帮助,或者扫码二维码加入 Web 技术交流群。
绑定邮箱获取回复消息
由于您还没有绑定你的真实邮箱,如果其他用户或者作者回复了您的评论,将不能在第一时间通知您!
发布评论
评论(4)
这事跟IBM的存储没关系,IBM的一切安好,就是NetApp的比较烦人。
听2楼同志这么说,原来有HBA跟存储有不匹配,不使用的问题,我一直以为换驱动就解决的。
这个要netapp提供兼容性列表是否是兼容的
本帖最后由 lbseraph 于 2011-04-27 12:18 编辑
没法切换,这个驱动和你的HBA的具体型号有关。你机器A应该用fclplist命令。检查一下IBM存储那边有没present给机器A了吧(当然你要先确认该存储是否支持机器A的HBA卡)。