HP小机的串口线和IBM小机用的串口线有什么区别吗？

Question

两种机器的串口线可以通用吗？？

听说HP小机的串口必须用笔记本自带的串口才可以连上。

用USB转的串口是不能连的
是这样吗？？

我现在的本本没有串口，那启不是不能连了？？
大家做HP小机，是怎么连的呢？？

Answer 1

用USB转的串口，经常出问题，看你的rp了，呵呵。

Answer 2

唉，
就通过一次，还是乱码，
比较郁闷呀，
现在搞个带串口的本本不容易呀。
没别的办法了？

Answer 3

弄个直连线

arp -s ip_address MAC_address

Answer 4

楼上的什么意思？？

Answer 5

To configure a static IP address using the ARP Ping utility, follow these steps:

1. Obtain the iLO MP MAC address. To set the IP address using ARP, you must know the MAC address of the iLO MP LAN. You can find the MAC address of the iLO MP LAN on a label on the server.

        IMPORTANT: Make sure you obtain the MAC address to the  iLO MP LAN and not the MAC address to the server core LAN.     

2. Verify that an active LAN cable on the local subnet is connected to the iLO MP LAN port on the server.

3. Access a PC on the same physical subnet as the server.

4. Open a DOS window on the PC.

5. At the DOS prompt, enter arp -s to assign the IP address to the iLO MAC address.

        Syntax

                arp -s <IP address you want to assign to the iLO MAC address> <iLO MAC address>

        Example from Windows

                arp -s 192.0.2.1 00-00-0c-07-ac-00

6. At the DOS prompt, enter ping followed by the IP address to verify that the iLO MP LAN port is configured with the appropriate IP address. The destination address is the IP address that is mapped to the iLO MAC address. Perform this task from the PC that has the ARP table entry.

Syntax

ping <IP address just assigned to the iLO MAC address>

Example from Windows

ping 192.0.2.1

7. Use this IP address to connect to the iLO MP LAN.

8. Use Web or telnet access to connect to the iLO MP from a host on the local subnet and complete the rest of the LAN parameter (gateway, subnet).

Answer 6

使用笔记本串口PC卡。

Answer 7

连接HP 小机的串口可以用笔记本的USB口，另外需要用到一根USB2.0转RS232串口线即可。我在京东买的转接线，你可以参考一下。http://www.360buy.com/product/134961.html

Answer 8

IBM和HP小型机的串口线的线序是不一样的。

Answer 9

HP小型机串口线线序.JPG (51.27 KB, 下载次数: 0)

下载附件

2011-06-14 15:41 上传