linux移植pxa270错误:IP-Config: Device eth0 not found.VFS错误
在pxa270上移植linux-2.6.9内核。
请教错误:
Start boot kernel...
set boot params : "root=/dev/mtdblock2 init=/linuxrc console=ttyS0,115200 devfs=mount display=shp240"
Uncompressing Linux......................................................................................... done, booting the kernel.
Linux version 2.6.9 (root@ce6) (gcc version 3.3.2) #1 Wed Sep 19 15:46:59 CST 2007
CPU: XScale-PXA270 [69054117] revision 7 (ARMv5TE)
CPU: D undefined 5 cache
CPU: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Machine: Intel HCDDBBVA0 Development Platform (aka Mainstone)
Memory policy: ECC disabled, Data cache writeback
Run Mode clock: 208.00MHz (*16)
Turbo Mode clock: 520.00MHz (*2.5, active)
Memory clock: 104.00MHz (/2)
System bus clock: 104.00MHz
Built 1 zonelists
Kernel command line: root=/dev/mtdblock2 rootfstype=jffs2 ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0n console=ttyS0,115200 mem=64M
PID hash table entries: 512 (order: 9, 8192 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB = 64MB total
Memory: 61952KB available (2285K code, 497K data, 104K init)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
SCSI subsystem initialized
NET: Registered protocol family 23
NetWinder Floating Point Emulator V0.97 (double precision)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: devfs_debug: 0x0
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
Console: switching to colour frame buffer device 30x40
SA1100/PXA2xx Watchdog Timer: timer margin 60 sec
ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART
ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART
ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Using anticipatory io scheduler
nbd: registered device at major 43
Linux video capture interface: v1.00
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET: Registered protocol family 1
NET: Registered protocol family 17
IP-Config: Device `eth0' not found.
Root-NFS: No NFS server available, giving up.
VFS: Unable to mount root fs via NFS, trying floppy.
VFS: Cannot open root device "mtdblock2" or unknown-block(2,0)
Please append a correct "root=" boot option
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)
如果你对这篇内容有疑问,欢迎到本站社区发帖提问 参与讨论,获取更多帮助,或者扫码二维码加入 Web 技术交流群。
绑定邮箱获取回复消息
由于您还没有绑定你的真实邮箱,如果其他用户或者作者回复了您的评论,将不能在第一时间通知您!
发布评论