NBU_86号错误

发布于 2022-09-04 22:32:51 字数 2645 浏览 12 评论 8

本帖最后由 tuzhu2046 于 2010-08-23 13:19 编辑

我这边的环境是：Master Server+5台Media Server,共用一个ADIC 2000带库（走SAN，配置了两个驱动器），另外有3台客户端（走lan，备份到Master Server的存储单元），只备份Oracle。
问题：Media server上的oracle备份都没问题；三台客户端备份几乎都在报86号错误（一台较为频繁，另外两台也经常报86号错误）。
我在Master Server 建立了bptm，却只得到如下相关信息、未见有高于4的报错信息（调试级别已设为5）：
12:49:03.359 [3364.3608] <2> bptm: NUM UP 2 2 0 0 2 0 IBMULTRIUM-TD20 IBMULTRIUM-TD21 a-IBMULTRIUM-TD20 b-IBMULTRIUM-TD21
12:49:03.359 [3364.3608] <2> bptm: EXITING with status 0 <----------
12:50:00.937 [2792.2108] <2> get_tape_path: drive index 1, DOS name: \.Tape1, PnP name: \?scsi#sequential&ven_ibm&prod_ultrium-td2&rev_4ap0#7&2828f990&1&000003#{53f5630b-b6bf-11d0-94f2-00a0c91efb8b}
12:50:00.953 [2792.2108] <2> check_serial_no: serial number match for drive \.Tape1, drive index 1, drive serial number 8110179674, expected serial number 8110179674
12:50:00.984 [2792.2108] <2> init_tape: \.Tape1 configured with blocksize 0
12:50:00.984 [2792.2108] <2> init_tape: \.Tape1 has compression enabled
12:50:01.000 [2792.2108] <2> io_open: SCSI RESERVE
12:50:01.000 [2792.2108] <2> io_open: file C:Program FilesVERITASNetBackupdbmediatpreq/001474 successfully opened (mode 2)
12:50:01.000 [2792.2108] <2> io_ioctl: command (2)MTBSF 1 from (bptm.c.20076) on drive index 1
12:50:01.015 [2792.2108] <2> io_ioctl: MTBSF hit BOT
12:50:01.015 [2792.2108] <2> check_error_history: called from bptm line 20079, EXIT_Status = 86
12:50:01.015 [2792.2108] <2> check_error_history: drive index = 1, media id = 001474, time = 08/17/10 12:50:01, both_match = 0, media_match = 0, drive_match = 0
12:50:01.015 [2792.2108] <2> io_close: closing C:Program FilesVERITASNetBackupdbmediatpreq/001474, from bptm.c.15839
12:50:01.015 [2792.2108] <2> tpunmount: Check_for_waiting = 0, No_tpunmount_after_restore = 0, Media_Unmount_Delay = 0, MediaOffset = 8
12:50:01.015 [2792.2108] <2> tpunmount: tpunmount'ing C:Program FilesVERITASNetBackupdbmediatpreq/001474
12:50:01.031 [2792.2108] <2> get_tape_path: drive index 1, DOS name: \.Tape1, PnP name: \?scsi#sequential&ven_ibm&prod_ultrium-td2&rev_4ap0#7&2828f990&1&000003#{53f5630b-b6bf-11d0-94f2-00a0c91efb8b}
12:50:01.046 [2792.2108] <2> check_serial_no: serial number match for drive \.Tape1, drive index 1, drive serial number 8110179674, expected serial number 8110179674
我把Master Server的带机删了重扫，问题依旧。带子新的一批，应该没有介质性问题。