smit mktcpip配置IP不能配置上去.(附操作过程及报错信息)

Question

昨天在一台E8A的en1口上配置ip,槽位是P1-C2-T2
用lscfg -vp|grep ent查看ent状态 均为Available.
在其他口配置均正确.en2口配置ip为10.0.80.4 掩码255.255.255.0 没有配其他信息
接口状态如下
# lsdev -c adapter
ent0    Available 06-00 2-Port 10/100/1000 Base-TX PCI-Express Adapter (14104003)
ent1    Available 06-01 2-Port 10/100/1000 Base-TX PCI-Express Adapter (14104003)
ent2    Available 00-00 2-Port 10/100/1000 Base-TX PCI-Express Adapter (14104003)
ent3    Available 00-01 2-Port 10/100/1000 Base-TX PCI-Express Adapter (14104003)
ent4    Available       Logical Host Ethernet Port (lp-hea)
ent5    Available       Logical Host Ethernet Port (lp-hea)
fcs0    Available 07-00 4Gb FC PCI Express Adapter (df1000fe)
fcs1    Available 07-01 4Gb FC PCI Express Adapter (df1000fe)
lhea0   Available       Logical Host Ethernet Adapter (l-hea)
sissas0 Available 01-08 PCI-X266 Planar 3Gb SAS Adapter
usbhc0  Available 02-08 USB Host Controller (33103500)
usbhc1  Available 02-09 USB Host Controller (33103500)
usbhc2  Available 02-0a USB Enhanced Host Controller (3310e000)
vsa0    Available       LPAR Virtual Serial Adapter
vsa1    Available       LPAR Virtual Serial Adapter
但是配置IP后报错如下

    Minimum Configuration & Startup

To Delete existing configuration data, please use Further Configuration menus
  
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
  
[MORE...2]                                              [Entry Fields]
  Network MASK (dotted decimal)                      [255.255.255.0]
* Network INTERFACEted decimal)                      [en1
  NAMESERVER
           Internet ADDRESS (dotted decimal)         []
           DOMAIN Name                               []
  Default Gateway
       Address (dotted decimal or symbolic name)     []
       Cost                                          []                       #
       Do Active Dead Gateway Detection?              no                     +
  Your CABLE Type                                     N/A                    +
  START Now                                           yes                    +
[BOTTOM]
  
F1=Help     lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
Esc+5=Reset x Running command...                                   x         
F9=Shell    mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj         

                                 COMMAND STATUS

Command: running       stdout: yes           stderr: no

Before command completion, additional instructions may appear below.

[MORE...7]
0821-103 : The command /usr/sbin/ifconfig en1 inet  10.0.80.6 arp netmask 255.25
5.255.0 mtu 1500 up failed.
0821-007 cfgif: ifconfig command failed.
        The status of"en1" Interface in the current running system is uncertain.
0821-103 : The command /usr/lib/methods/cfgif -len1 failed.
0821-510 ifconfig: error calling entry point for /usr/lib/drivers/if_en: A syste
m call received a parameter that is not valid.
0821-103 : The command /usr/sbin/ifconfig en1 inet 10.0.80.6 arp netmask 255.255
.255.0 mtu 1500 up failed.
0821-229 chgif: ifconfig command failed.
The status of"en1" Interface in the current running system is uncertain.

mktcpip: Problem with command: chdev
, return code = 1

[BOTTOM]

rmdev -dl en1
rmdev -dl ent1 删除这个端口后cfgmgr -v
再配置IP还是失败 出错信息依然

收藏 分享

Answer 1

回复 4# 树袋熊

    恩 没好的话说声

Answer 2

回复 3# fcmigo

    哦 ，好的， 我马上就去删卡重启。

Answer 3

回复 2# 树袋熊

    ??
这个问题现在已经解决了  删除物理和逻辑网卡后重启就可以了

Answer 4

反正你也不会回来地...我们就什么都不说了,呵呵 .