为什么服务已启动但systemctl 依旧提示failed?
OS:Vmware8.0 模拟 fedora15
非root用户,使用如下命令都显示failed
$ systemctl is-active network.service failed
$ systemctl status network.service
network.service - LSB: Bring up/down networking
Loaded: loaded (/etc/rc.d/init.d/network)
Active: failed since Thu, 29 Aug 2013 13:21:18 +0800; 4h 36min ago
Process: 822 ExecStart=/etc/rc.d/init.d/network start (code=exited, status=1/FAILURE)
CGroup: name=systemd:/system/network.service
但实实在在的有IP啊
p3p1 Link encap:Ethernet HWaddr 00:xx:xx:xx:A4:78
inet addr:192.168.132.130 Bcast:192.168.132.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe58:a478/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:229980 errors:0 dropped:0 overruns:0 frame:0
TX packets:323133 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:33418110 (31.8 MiB) TX bytes:325499369 (310.4 MiB)
Interrupt:19 Base address:0x2000
samba,secucrt也可以连上
如果你对这篇内容有疑问,欢迎到本站社区发帖提问 参与讨论,获取更多帮助,或者扫码二维码加入 Web 技术交流群。
绑定邮箱获取回复消息
由于您还没有绑定你的真实邮箱,如果其他用户或者作者回复了您的评论,将不能在第一时间通知您!
发布评论
评论(1)
我是centos7遇到的这个问题,装上libvirt之后就ok了