rp2405的重启出差
机器掉电,恢复供电以后重启出错,一大堆错误提示 /rc/rc3.d/***** '(' 之类的错误,前面板Attn黄灯闪烁,ctrl+b提示用户名,密码
麻烦问下这个东东咋解决啊?
[ 本帖最后由 yuio654 于 2009-11-30 14:58 编辑 ]
如果你对这篇内容有疑问,欢迎到本站社区发帖提问 参与讨论,获取更多帮助,或者扫码二维码加入 Web 技术交流群。
绑定邮箱获取回复消息
由于您还没有绑定你的真实邮箱,如果其他用户或者作者回复了您的评论,将不能在第一时间通知您!
发布评论
评论(9)
机器上边有重要数据?
如果没有重要数据,就无所谓嘛,大不了XX一下!呵呵
以前停电都有通知,这次是没通知就给停了,整个楼都停,自己的电脑已经没电了,只好一个个串口连关机,无奈速度太慢
/etc/rc.log
Configure system crash dumps
Output from "/sbin/rc1.d/S080crashconf start":
----------------------------
EXIT CODE: 0
Removing old vxvm files
Output from "/sbin/rc1.d/S090sw_clean_vxvm start":
----------------------------
VxVM VxVM device node check
Output from "/sbin/rc1.d/S091vxvm-nodes-check start":
----------------------------
/sbin/rc1.d/S091vxvm-nodes-check[4]: /usr/sbin/lsdev: not found
VxVM VxVM general startup
Output from "/sbin/rc1.d/S092vxvm-startup start":
----------------------------
Output from "/sbin/rc1.d/S093vxvm-reconfig start":
----------------------------
/sbin/rc1.d/S093vxvm-reconfig[45]: /etc/vx/lib/vxcommon: not found
"/sbin/rc1.d/S093vxvm-reconfig start" FAILED
Mount file systems
Output from "/sbin/rc1.d/S100localmount start":
应急计划做的不好啊。
哎,头疼,整个楼都断电啦,ups没有撑到关机就断了
这么不稳定
启动过程中crtl+c可以进入系统,这时候网络这类的服务都没有启动,甚至ip都是空的,
/sbin/init.d/net start启动报同样的错误 syntax error at line *** : '('is not expected
通过ifconfig 和route可以填上ip
看这样子有点类似先启动服务,后挂载的文件系统。但是没有动过啊。郁闷
到单用户同样的提示
/etc/rc.log
开头的错误
更正一下,这里有错误
到单用户是没有问题的
System Boot detected
*****************************************
LEDs: RUN ATTENTION FAULT REMOTE POWER
FLASH FLASH OFF ON ON
LED State: Running non-OS code. Non-critical error detected.
Check Chassis and Console Logs for error messages.
platform config 626F
processor test 1142
PDH INIT 3722
processor test 1100
processor test 1100
processor test 1100
processor test 1100
processor test 1100
PDH config 322F
PDH test 3149
PDH test 3160
platform test 616A
processor test 1146
processor INIT 1701
processor test 1110
processor test 1111
processor test 1112
processor test 1113
processor test 1114
processor test 1115
processor test 1116
processor test 1117
processor test 1118
processor test 1119
processor test 111A
processor test 111B
processor test 111C
processor test 111D
processor cache test 2111
processor cache test 2112
processor cache test 2113
processor cache test 2121
processor cache test 2122
processor cache test 2122
processor test 1151
processor INIT 1701
processor test 1110
processor test 1142
processor test 1142
PDH test 3158
PDH test 3157
PDH test 316E
PDH test 316E
PDH test 316E
memory config 7210
memory INIT 7702
memory INIT 771D
memory test 7150
memory config 7213
memory config 7213
memory config 7225
memory config 7214
memory config 7213
memory config 7214
memory config 7213
memory config 7213
memory config 7213
memory config 7213
memory config 7213
memory config 7213
memory config 7213
memory config 7215
memory config 7216
memory config 72A0
memory test 71A1
memory test 71A2
memory test 71A4
memory test 71A5
memory test 71A6
memory test 71A3
memory test 71A4
memory test 71A4
memory test 71A5
memory test 71A5
memory test 71A6
memory test 71A6
memory config 7217
memory config 7218
memory config 72A0
memory test 71A1
memory test 71A2
memory test 71A4
memory test 71A5
memory test 71A6
memory test 71A3
memory test 71A4
memory test 71A4
memory test 71A5
memory test 71A5
memory test 71A6
memory test 71A6
memory config 7210
I/O INIT 8701
I/O test 8118
I/O test 8118
I/O INIT 8701
I/O INIT 8701
I/O INIT 8701
I/O INIT 8701
I/O INIT 8701
memory config 7240
memory INIT 7702
memory config 7241
memory config 7243
memory config 72A0
memory test 71A1
memory test 71A2
memory test 71A4
memory test 71A5
memory test 71A6
memory test 71A3
memory test 71A4
memory test 71A4
memory test 71A4
memory test 71A4
memory test 71A4
memory test 71A4
memory test 71A4
memory test 71A4
memory test 71A4
memory test 71A5
memory test 71A5
memory test 71A5
memory test 71A5
memory test 71A5
memory test 71A5
memory test 71A5
memory test 71A5
memory test 71A5
memory test 71A6
memory test 71A6
memory test 71A6
memory test 71A6
memory test 71A6
memory test 71A6
memory test 71A6
memory test 71A6
memory test 71A6
memory INIT 7745
memory config 7240
I/O config 8204
I/O INIT 8701
I/O INIT 8701
I/O INIT 8701
I/O INIT 8701
I/O test 8119
I/O test 8119
I/O test 8119
I/O test 8119
I/O test 8119
I/O test 8119
I/O config 8204
processor test 1120
processor test 1133
processor test 1134
processor test 1135
processor test 1136
processor test 1137
processor test 1138
processor test 1152
processor test 1139
processor test 113A
processor test 113B
processor test 113C
processor test 113D
processor test 113E
processor INIT 1701
processor test 1120
processor test 1142
processor test 113B
platform test 612A
I/O config 8238
*****************************************
************ EARLY BOOT VFP *************
End of early boot detected
*****************************************
Firmware Version 42.19
Duplex Console IO Dependent Code (IODC) revision 1
------------------------------------------------------------------------------
(c) Copyright 1995-2001, Hewlett-Packard Company, All rights reserved
------------------------------------------------------------------------------
Processor Speed State CoProcessor State Cache Size
Number State Inst Data
--------- -------- --------------------- ----------------- ------------
0 650 MHz Active Functional 750 KB 1.5 MB
Central Bus Speed (in MHz) : 120
Available Memory : 2097152 KB
Good Memory Required : 25820 KB
Primary boot path: 0/0/1/1.15
Alternate boot path: 0/0/2/1.15
Console path: 0/0/4/1.0
Keyboard path: 0/0/4/0.0
Processor is booting from first available device.
To discontinue, press any key within 10 seconds.
Boot terminated.
---- Main Menu ---------------------------------------------------------------
Command Description
------- -----------
BOot [PRI|ALT|<path>] Boot from specified path
PAth [PRI|ALT] [<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>] Search for boot devices
COnfiguration menu Displays or sets boot values
INformation menu Displays hardware information
SERvice menu Displays service commands
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
----
Main Menu: Enter command or menu > [B
Main Menu: Enter command or menu > bo pri
Interact with IPL (Y, N, or Cancel)?> y
Booting...
Boot IO Dependent Code (IODC) revision 1
HARD Booted.
ISL Revision A.00.43 Apr 12, 2000
ISL> hpux -is
Boot
: disk(0/0/1/1.15.0.0.0.0.0;0)/stand/vmunix
10190848 + 1769472 + 4551560 start 0x1fc0e8
alloc_pdc_pages: Relocating PDC from 0xf0f0000000 to 0x7fa00000.
gate64: sysvec_vaddr = 0xc0002000 for 2 pages
NOTICE: autofs_link(): File system was registered at index 3.
NOTICE: cachefs_link(): File system was registered at index 5.
NOTICE: nfs3_link(): File system was registered at index 6.
System Console is on the Built-In Serial Interface
Entering cifs_init...
Initialization finished successfully... slot is 9
Logical volume 64, 0x3 configured as ROOT
Logical volume 64, 0x2 configured as SWAP
Logical volume 64, 0x2 configured as DUMP
Swap device table: (start & size given in 512-byte blocks)
entry 0 - major is 64, minor is 0x2; start = 0, size = 4194304
Starting the STREAMS daemons-phase 1
Checking root file system.
file system is clean - log replay is not required
Root check done.
Create STCP device files
$Revision: vmunix: vw: -proj selectors: CUPI80_BL2000_1108 -c 'Vw for CUPI80_BL2000_1108 build' -- cupi80_bl2000_1108 'CUPI80_BL2000_1108' Wed Nov 8 19:24:56 PST 2000 $
Memory Information:
physical page size = 4096 bytes, logical page size = 4096 bytes
Physical: 2097152 Kbytes, lockable: 1545616 Kbytes, available: 1781800 Kbytes
/sbin/ioinitrc:
/sbin/krs_sysinit:
INIT: Overriding default level with level 's'
INIT: SINGLE USER MODE
INIT: Running /sbin/sh
# bash
sh: bash: not found
到单用户去有问题没?