HP RX2600 安装HPUX11i23系统问题

Question

Calling function e0000000011862e0 for Shutdown State 8 type 0x4

MCA[0]:MCA occurred!!!.
MCA[0]: lid 0x0
MCA[0]: iip 0xe0000000008e7e40, ipsr 0x1010086ae01a, ifa 0x0000000000000028
MCA[0]: xip 0xe000000000706bb0, xpsr 0x1410084ae01a, xfs 0x80000000000025ce
MCA[0]:The processor state register value = 0xa8000000fff21330
MCA[0]:Rendezvous status information GR11 = 1
MCA[0]:mca_wakeup() procs MCA'ed 1, procs rendezvous'ed 1,
procs INIT'ed 0, procs not rendezvoused 0.
MCA, IIP:0xe0000000008e7e40 IFA:0x0000000000000028
WARNING: Cache/Memory error is reported but OS_MCA could not exclude target addr
ess range from memory pages to be dumped.
Dump may abort due to additional MCA or DMA error.
*** A system crash has occurred. (See the above messages for details.)
*** The system is now preparing to dump physical memory to disk, for use
*** in debugging the crash.q
ERROR:  No dump space is configured.  Physical memory will not be dumped.
ERROR:  Configured dump space is insufficient to hold dump metadata.
       Physical memory will not be dumped.

出现这个就自动重启 ,安装不了系统..求救

Answer 1

大家学习一下啊

Answer 2

楼主最好把HP工程师的解决过程贴个出来。谢谢

Answer 3

只能那出去修啦。。谢谢各位的帮忙:wink:

Answer 4

可能是内存，也可能是插槽，也可能是别的硬件问题，最好报个case
或者换个安装盘试试

Answer 5

出现MCA不一定是内存的问题，如果你的机器还在保的话，打HP的800热线报个case。

然后进入EFI shell里面收集MCA的信息(Shell>errdump mca)发给HP的工程师用工具decode后才能了解是不是有其他硬件有故障~

Answer 6

原帖由 lianjian8527 于 2009-9-14 15:36 发表
内存都换过好几组来试啦.还是出现一样的情况.. 用这些内存在别的RX2600上测试可以顺利安装系统..  估计是内存插槽有问题..

是不是槽位的弄错了？好象是1A、1B的……参考user guide

Answer 7

内存都换过好几组来试啦.还是出现一样的情况.. 用这些内存在别的RX2600上测试可以顺利安装系统..  估计是内存插槽有问题..

Answer 8

检查内存

Answer 9

WARNING: Cache/Memory error is reported but OS_MCA could not exclude target address range from memory pages to be dumped.
Dump may abort due to additional MCA or DMA error

是不是内存啥的插得有问题了？
Machine Check Abort (MCA)

[ 本帖最后由 gesture 于 2009-9-14 13:51 编辑 ]