NBU 6.5.3 + FUJITSU Lt160 3个drive中只有1个OK

Question

设备：

     带库：FUJITSU LT160
     NBU: 6.5.3 for windows
     mapping files :1.73

目前问题：

     1个机械臂和3个LTO2的驱动器都已识别，3个LTO2驱动器中2个老的，1个是去年新扩的，
     目前只有1个新扩的好用，2个老的无法使用。

     机械臂可以抓带到2个老的驱动器中，但无写操作。

     2009-2-9 15:33:12 - requesting resource sap3-hcart2-robot-tld-0
2009-2-9 15:33:12 - requesting resource sap3.NBU_CLIENT.MAXJOBS.sap3
2009-2-9 15:33:12 - requesting resource sap3.NBU_POLICY.MAXJOBS.test
2009-2-9 15:33:12 - granted resource sap3.NBU_CLIENT.MAXJOBS.sap3
2009-2-9 15:33:12 - granted resource sap3.NBU_POLICY.MAXJOBS.test
2009-2-9 15:33:12 - granted resource LTO210
2009-2-9 15:33:12 - granted resource IBM.ULTRIUM-TD2.001
2009-2-9 15:33:12 - granted resource sap3-hcart2-robot-tld-0
2009-2-9 15:33:13 - estimated 26 kbytes needed
2009-2-9 15:33:13 - started process bpbrm (4012)
2009-2-9 15:33:13 - connecting
2009-2-9 15:33:14 - connected; connect time: 00:00:01
2009-2-9 15:33:18 - mounting LTO210
2009-2-9 15:48:22 - Error bptm(pid=5804) error requesting media, TpErrno = Robot operation failed     
2009-2-9 15:48:22 - Warning bptm(pid=5804) media id LTO210 load operation reported an error     
2009-2-9 15:48:22 - current media LTO210 complete, requesting next media Any
2009-2-9 15:48:29 - granted resource LTO210
2009-2-9 15:48:29 - granted resource IBM.ULTRIUM-TD2.000
2009-2-9 15:48:29 - granted resource sap3-hcart2-robot-tld-0
2009-2-9 15:48:30 - mounting LTO210
2009-2-9 16:03:20 - Error bptm(pid=5804) error requesting media, TpErrno = Robot operation failed     
2009-2-9 16:03:20 - Warning bptm(pid=5804) media id LTO210 load operation reported an error     
2009-2-9 16:03:20 - current media LTO210 complete, requesting next media Any
2009-2-9 16:03:40 - Error bptm(pid=5804) NBJM returned an extended error status: resource request failed (800)   
2009-2-9 16:03:44 - end writing
extended error status has been encountered, check logs(252)

      各位帮忙看一下是哪个环节出问题了。

Answer 1

同意狼哥，请检查新旧磁带驱动器的 旧的驱动器固件微码和新的不相符。确认符合的情况下
bin>robtest  测试  检查机械手是否移动自如！

Answer 2

看看firmware是不是一致

Answer 3

你用robtest试一试，排除配置的原因。