2.6.13 内核 求助~！

Question

Uncompressing Linux...................................................................... done, booting the kernel.
[21474536.480000] ************test**************

[21474536.480000] Linux version 2.6.13 (Admin@FOREVER) (gcc version 3.3.2) #170 Wed Jul 19 08:59:47 2006

[21474536.480000] CPU: ARM920T [41129200] revision 0 (ARMv4T)

[21474536.480000] Machine: SMDK2410

[21474536.480000] Warning: bad configuration page, trying to continue

[21474536.480000] Memory policy: ECC disabled, Data cache buffered

[21474536.480000] CPU S3C2410A (id 0x32410002)

[21474536.480000] S3C2410: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz

[21474536.480000] S3C2410 Clocks, (c) 2004 Simtec Electronics

[21474536.480000] CPU0: D VIVT write-back cache

[21474536.480000] CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets

[21474536.480000] CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets

[21474536.480000] Built 1 zonelists

[21474536.480000] Kernel command line: initrd=0x30800000,0x440000 mem=64M root=/dev/ram init=/linuxrc console=ttySAC0,115200

[21474536.480000] irq: clearing pending ext status 00000200

[21474536.480000] irq: clearing subpending status 00000002

[21474536.480000] PID hash table entries: 512 (order: 9, 8192 bytes)

[21474536.480000] timer tcon=00500000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8

[21474536.480000] Console: colour dummy device 80x30

[21474536.485000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)

[21474536.525000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)

[21474536.670000] Memory: 64MB = 64MB total

[21474536.675000] Memory: 58240KB available (1625K code, 498K data, 92K init)

[21474536.785000] Mount-cache hash table entries: 512

[21474536.805000] CPU: Testing write buffer coherency: ok

[21474536.835000] checking if image is initramfs...

[21474581.865000]

[21474581.865000] **populate_rootfs has been called**

[21474581.865000]

[21474581.875000] it isn't (no cpio magic); looks like an initrd

[21474581.885000]

[21474581.885000]

[21474581.885000]

[21474581.885000] *******0*******

[21474581.885000]

[21474581.885000]

[21474581.895000]

[21474581.895000]

[21474581.895000] ******is image-initrd******

[21474581.895000]

[21474582.520000] Freeing initrd memory: 4352K

[21474582.540000] Linux NoNET1.0 for Linux 2.6

[21474582.550000] S3C2410: Initialising architecture

[21474582.640000] SCSI subsystem initialized

[21474582.650000] usbcore: registered new driver usbfs

[21474582.655000] usbcore: registered new driver hub

[21474582.710000] NetWinder Floating Point Emulator V0.97 (double precision)

[21474582.800000] devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)

[21474582.805000] devfs: boot_options: 0x1

[21474582.810000] JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.

[21474585.850000] s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2410

[21474585.865000] s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2410

[21474585.875000] s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2410

[21474585.890000] io scheduler noop registered

[21474585.895000] io scheduler anticipatory registered

[21474585.960000] RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize

[21474585.995000] loop: loaded (max 8 devices)

[21474586.000000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

[21474586.005000] ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx

[21474586.055000] Probing YL-9200 Application Flash at physical address 0x10000000 (16-bit buswidth)

[21474586.095000] S3C24XX NAND Driver, (c) 2004 Simtec Electronics

[21474586.110000] usbmon: debugfs is not available

[21474586.120000] s3c2410-ohci s3c2410-ohci: S3C24XX OHCI

[21474586.135000] s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1

[21474586.140000] s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000

[21474586.215000] hub 1-0:1.0: USB hub found

[21474586.220000] hub 1-0:1.0: 2 ports detected

[21474586.235000] Initializing USB Mass Storage driver...

[21474586.245000] usbcore: registered new driver usb-storage

[21474586.250000] USB Mass Storage support registered.

[21474586.255000] usbcore: registered new driver usbhid

[21474586.260000] drivers/usb/input/hid-core.c: v2.01:USB HID core driver

[21474586.280000] dummy_hcd dummy_hcd: USB Host+Gadget Emulator, driver 02 May 2005

[21474586.285000] dummy_hcd dummy_hcd: Dummy host controller

[21474586.300000] dummy_hcd dummy_hcd: new USB bus registered, assigned bus number 2

[21474586.315000] hub 2-0:1.0: USB hub found

[21474586.320000] hub 2-0:1.0: 1 port detected

[21474586.340000] mice: PS/2 mouse device common for all mice

[21474586.345000] i2c /dev entries driver

[21474586.365000]

[21474586.365000] ******prepare_namespace has been called******

[21474586.405000]

[21474586.405000] ******initrd_load has been called*******

[21474586.480000]

[21474586.480000] *****rd_load_image has been called******

[21474586.490000]

[21474586.490000] *******<1> nblocks = -1071542888*******

[21474586.495000]

[21474586.495000] *******rd_image_start = 0*******

[21474586.505000] RAMDISK: Compressed image found at block 0

[21474586.510000]

[21474586.510000] *******2> nblocks = 0*******

[21474633.430000] VFS: Mounted root (ext2 filesystem) readonly.

[21474633.450000] Mounted devfs on /dev

[21474633.455000] Freeing init memory: 92K

mount /etc as ramfs
re-create the /etc/mtab entries

reboot(magic=00000000
)...

以上是我的串口打印信息 系统就是卡到这里不动了 希望得高人指点一二 ~！ 小弟QQ 10648820

Answer 1

rootfs有问题吧，initrd都启动完了