Question

class in UnityEngine / Inherits from: Behaviour

Description 描述

The Audio Reverb Filter takes an Audio Clip and distortionates it in a.

Way to create a personalized reverb effect.

音频混响滤波器采用一个音频剪辑并失真，来创建个性化的混响效果。

Variables 变量

decayHFRatio	Decay HF Ratio : High-frequency to low-frequency decay time ratio. Ranges from 0.1 to 2.0. Default is 0.5. 衰减高频比率：高频到低频的衰减时间比率。范围从0.1 到 2.0，默认为0.5。
decayTime	Reverberation decay time at low-frequencies in seconds. Ranges from 0.1 to 20.0. Default is 1.0. 在低频时的混响衰减时间，以秒为单位。范围从0.1 到 20.0，默认为1.0。
density	Reverberation density (modal density) in percent. Ranges from 0.0 to 100.0. Default is 100.0. 混响密度（模态密度）的百分比。范围从0.0 到 100.0，默认为100。
diffusion	Reverberation diffusion (echo density) in percent. Ranges from 0.0 to 100.0. Default is 100.0. 混响散射度（回声密度）的百分比。范围从0.0 到 100.0，默认为100。
dryLevel	Mix level of dry signal in output in mB. Ranges from -10000.0 to 0.0. Default is 0. 直达声信号输出的混合等级，单位mB。范围从-10000.0 到 0.0，默认为0.0。
hfReference	Reference high frequency in Hz. Ranges from 20.0 to 20000.0. Default is 5000.0. 高频引用，单位Hz。范围从20.0 到 20000.0，默认为5000.0。
lfReference	Reference low-frequency in Hz. Ranges from 20.0 to 1000.0. Default is 250.0. 引用低频，单位Hz。范围从20.0 到 1000.0，默认为250.0。
reflectionsDelay	Late reverberation level relative to room effect in mB. Ranges from -10000.0 to 2000.0. Default is 0.0. 后期混响等级相对于房间效应，单位mB，范围-10000.0 ~ 2000.0 ，默认为0.0。
reflectionsLevel	Early reflections level relative to room effect in mB. Ranges from -10000.0 to 1000.0. Default is -10000.0. 早期反射等级，相对于房间效果。范围从-10000.0 到 1000.0，默认为-10000.0。
reverbDelay	Late reverberation delay time relative to first reflection in seconds. Ranges from 0.0 to 0.1. Default is 0.04. 后期混响延迟时间，相对于首次反射，以秒为单位。范围从0.0 到 0.1，默认为0.04。
reverbLevel	Late reverberation level relative to room effect in mB. Ranges from -10000.0 to 2000.0. Default is 0.0. 后期混响等级，相对于房间效果，单位mB。范围从-10000.0 到 2000.0，默认为0.0。
reverbPreset	Set/Get reverb preset properties. 设置/发送混响预设属性。
room	Room effect level at low frequencies in mB. Ranges from -10000.0 to 0.0. Default is 0.0. 低频时房间效果等级，单位mB。范围从-10000.0到0.0，默认值0.0。
roomHF	Room effect high-frequency level re. low frequency level in mB. Ranges from -10000.0 to 0.0. Default is 0.0. 高频房间效果等级，单位mB。范围从-10000.0 到 0.0，默认为0.0。
roomLF	Room effect low-frequency level in mB. Ranges from -10000.0 to 0.0. Default is 0.0. 低频房间效果等级，单位mB。范围从-10000.0 到 0.0，默认为0.0。
roomRolloff	Rolloff factor for room effect. Ranges from 0.0 to 10.0. Default is 10.0. 房间效果的衰减系数。范围从-0.0 到 10.0，默认为10.0。