Question

The QBoxLayout class lines up child widgets horizontally or vertically. More...

#include <qlayout.h>

Inherits QLayout.

Inherited by QHBoxLayout and QVBoxLayout.

List of all member functions.

Public Members

• enum Direction { LeftToRight, RightToLeft, TopToBottom, BottomToTop, Down = TopToBottom, Up = BottomToTop }
• QBoxLayout ( QWidget*parent, Directiond, intmargin = 0, intspacing = -1, constchar*name = 0 )
• QBoxLayout ( QLayout*parentLayout, Directiond, intspacing = -1, constchar*name = 0 )
• QBoxLayout ( Directiond, intspacing = -1, constchar*name = 0 )
• ~QBoxLayout ()
• virtual void addItem ( QLayoutItem*item )
• Direction direction () const
• void setDirection ( Directiondirection )
• void addSpacing ( intsize )
• void addStretch ( intstretch = 0 )
• void addWidget ( QWidget*widget, intstretch = 0, intalignment = 0 )
• void addLayout ( QLayout*layout, intstretch = 0 )
• void addStrut ( intsize )
• void insertSpacing ( intindex, intsize )
• void insertStretch ( intindex, intstretch = 0 )
• void insertWidget ( intindex, QWidget*widget, intstretch = 0, intalignment = 0 )
• void insertLayout ( intindex, QLayout*layout, intstretch = 0 )
• bool setStretchFactor ( QWidget*w, intstretch )
• bool setStretchFactor ( QLayout*l, intstretch )
• virtual QSize sizeHint () const
• virtual QSize minimumSize () const
• virtual QSize maximumSize () const
• virtual bool hasHeightForWidth () const
• virtual int heightForWidth ( intw ) const
• virtual QSizePolicy::ExpandData expanding () const
• virtual void invalidate ()
• virtual void setGeometry ( constQRect&r )
• int findWidget ( QWidget*w )

Protected Members

• void insertItem ( intindex, QLayoutItem*item )

---

Detailed Description

The QBoxLayout class lines up child widgets horizontally or vertically.

QBoxLayout takes the space it gets (from its parent layout or from the mainWidget()), divides it up into a row of boxes, and makes each managed widget fill one box.

If the QBoxLayout's orientation is Horizontal the boxes are placed in a row, with suitable sizes. Each widget (or other box) will get at least its minimum size and at most its maximum size. Any excess space is shared according to the stretch factors (more about that below).

If the QBoxLayout's orientation is Vertical, the boxes are placed in a column, again with suitable sizes.

The easiest way to create a QBoxLayout is to use one of the convenience classes, e.g. QHBoxLayout (for Horizontal boxes) or QVBoxLayout (for Vertical boxes). You can also use the QBoxLayout constructor directly, specifying its direction as LeftToRight, Down, RightToLeft or Up.

If the QBoxLayout is not the top-level layout (i.e. it is not managing all of the widget's area and children), you must add it to its parent layout before you can do anything with it. The normal way to add a layout is by calling parentLayout->addLayout().

Once you have done this, you can add boxes to the QBoxLayout using one of four functions:

• addWidget() to add a widget to the QBoxLayout and set the widget's stretch factor. (The stretch factor is along the row of boxes.)

• addSpacing() to create an empty box; this is one of the functions you use to create nice and spacious dialogs. See below for ways to set margins.

• addStretch() to create an empty, stretchable box.

• addLayout() to add a box containing another QLayout to the row and set that layout's stretch factor.

Use insertWidget(), insertSpacing(), insertStretch() or insertLayout() to insert a box at a specified position in the layout.

QBoxLayout also includes two margin widths:

• setMargin() sets the width of the outer border. This is the width of the reserved space along each of the QBoxLayout's four sides.
• setSpacing() sets the width between neighboring boxes. (You can use addSpacing() to get more space at a particular spot.)

The margin defaults to 0. The spacing defaults to the same as the margin width for a top-level layout, or to the same as the parent layout. Both are parameters to the constructor.

To remove a widget from a layout, either delete it or reparent it with QWidget::reparent(). Hiding a widget with QWidget::hide() also effectively removes the widget from the layout, until QWidget::show() is called.

You will almost always want to use QVBoxLayout and QHBoxLayout rather than QBoxLayout because of their convenient constructors.

See also QGrid, Layout Overview, Widget Appearance and Style and Layout Management.

---

Member Type Documentation

QBoxLayout::Direction

This type is used to determine the direction of a box layout.

• QBoxLayout::LeftToRight - Horizontal, from left to right
• QBoxLayout::RightToLeft - Horizontal, from right to left
• QBoxLayout::TopToBottom - Vertical, from top to bottom
• QBoxLayout::Down - The same as TopToBottom
• QBoxLayout::BottomToTop - Vertical, from bottom to top
• QBoxLayout::Up - The same as BottomToTop

---

Member Function Documentation

QBoxLayout::QBoxLayout ( QWidget*parent, Directiond, intmargin = 0, intspacing = -1, constchar*name = 0 )

Constructs a new QBoxLayout with direction d and main widget parent. parent may not be 0.

The margin is the number of pixels between the edge of the widget and its managed children. The spacing is the default number of pixels between neighboring children. If spacing is -1 the value of margin is used for spacing.

name is the internal object name.

See also direction().

QBoxLayout::QBoxLayout ( QLayout*parentLayout, Directiond, intspacing = -1, constchar*name = 0 )

Constructs a new QBoxLayout called name, with direction d, and inserts it into parentLayout.

The spacing is the default number of pixels between neighboring children. If spacing is -1, the layout will inherit its parent's spacing().

QBoxLayout::QBoxLayout ( Directiond, intspacing = -1, constchar*name = 0 )

Constructs a new QBoxLayout called name, with direction d.

If spacing is -1, the layout will inherit its parent's spacing(); otherwise spacing is used.

You must insert this box into another layout.

QBoxLayout::~QBoxLayout ()

Destroys this box layout.

The layout's widgets are not destroyed.

void QBoxLayout::addItem ( QLayoutItem*item ) [virtual]

Adds item to the end of this box layout.

Examples: chart/optionsform.cpp and chart/setdataform.cpp.

Reimplemented from QLayout.

void QBoxLayout::addLayout ( QLayout*layout, intstretch = 0 )

Adds layout to the end of the box, with serial stretch factor stretch.

See also insertLayout(), setAutoAdd(), addWidget() and addSpacing().

Examples: chart/optionsform.cpp, chart/setdataform.cpp, fonts/simple-qfont-demo/viewer.cpp, listbox/listbox.cpp and tictac/tictac.cpp.

void QBoxLayout::addSpacing ( intsize )

Adds a non-stretchable space with size size to the end of this box layout. QBoxLayout provides default margin and spacing. This function adds additional space.

See also insertSpacing() and addStretch().

Example: listbox/listbox.cpp.

void QBoxLayout::addStretch ( intstretch = 0 )

Adds a stretchable space with zero minimum size and stretch factor stretch to the end of this box layout.

See also addSpacing().

Examples: layout/layout.cpp, listbox/listbox.cpp and t13/gamebrd.cpp.

void QBoxLayout::addStrut ( intsize )

Limits the perpendicular dimension of the box (e.g. height if the box is LeftToRight) to a minimum of size. Other constraints may increase the limit.

void QBoxLayout::addWidget ( QWidget*widget, intstretch = 0, intalignment = 0 )

Adds widget to the end of this box layout, with a stretch factor of stretch and alignment alignment.

The stretch factor applies only in the direction of the QBoxLayout, and is relative to the other boxes and widgets in this QBoxLayout. Widgets and boxes with higher stretch factors grow more.

If the stretch factor is 0 and nothing else in the QBoxLayout has a stretch factor greater than zero, the space is distributed according to the QWidget:sizePolicy() of each widget that's involved.

Alignment is specified by alignment which is a bitwise OR of Qt::AlignmentFlags values. The default alignment is 0, which means that the widget fills the entire cell.

From Qt 3.0, the alignment parameter is interpreted more aggressively than in previous versions of Qt. A non-default alignment now indicates that the widget should not grow to fill the available space, but should be sized according to sizeHint().

See also insertWidget(), setAutoAdd(), addLayout() and addSpacing().

Examples: chart/optionsform.cpp, fonts/simple-qfont-demo/viewer.cpp, layout/layout.cpp, lineedits/lineedits.cpp, listbox/listbox.cpp, t13/gamebrd.cpp and t13/lcdrange.cpp.

Direction QBoxLayout::direction () const

Returns the direction of the box. addWidget() and addSpacing() work in this direction; the stretch stretches in this direction.

See also QBoxLayout::Direction, addWidget() and addSpacing().

QSizePolicy::ExpandData QBoxLayout::expanding () const [virtual]

Returns the expansiveness of this layout.

Reimplemented from QLayout.

int QBoxLayout::findWidget ( QWidget*w )

Searches for widget w in this layout (not including child layouts).

Returns the index of w, or -1 if w is not found.

bool QBoxLayout::hasHeightForWidth () const [virtual]

Returns TRUE if this layout's preferred height depends on its width; otherwise returns FALSE.

Reimplemented from QLayoutItem.

int QBoxLayout::heightForWidth ( intw ) const [virtual]

Returns the layout's preferred height when it is w pixels wide.

Reimplemented from QLayoutItem.

void QBoxLayout::insertItem ( intindex, QLayoutItem*item ) [protected]

Inserts item into this box layout at position index. If index is negative, the item is added at the end.

Warning: Does not call QLayout::insertChildLayout() if item is a QLayout.

See also addItem() and findWidget().

void QBoxLayout::insertLayout ( intindex, QLayout*layout, intstretch = 0 )

Inserts layout at position index, with stretch factor stretch. If index is negative, the layout is added at the end.

See also setAutoAdd(), insertWidget() and insertSpacing().

void QBoxLayout::insertSpacing ( intindex, intsize )

Inserts a non-stretchable space at position index, with size size. If index is negative the space is added at the end.

The box layout has default margin and spacing. This function adds additional space.

See also insertStretch().

void QBoxLayout::insertStretch ( intindex, intstretch = 0 )

Inserts a stretchable space at position index, with zero minimum size and stretch factor stretch. If index is negative the space is added at the end.

See also insertSpacing().

void QBoxLayout::insertWidget ( intindex, QWidget*widget, intstretch = 0, intalignment = 0 )

Inserts widget at position index, with stretch factor stretch and alignment alignment. If index is negative, the widget is added at the end.

The stretch factor applies only in the direction of the QBoxLayout, and is relative to the other boxes and widgets in this QBoxLayout. Widgets and boxes with higher stretch factors grow more.

If the stretch factor is 0 and nothing else in the QBoxLayout has a stretch factor greater than zero, the space is distributed according to the QWidget:sizePolicy() of each widget that's involved.

Alignment is specified by alignment, which is a bitwise OR of Qt::AlignmentFlags values. The default alignment is 0, which means that the widget fills the entire cell.

From Qt 3.0, the alignment parameter is interpreted more aggressively than in previous versions of Qt. A non-default alignment now indicates that the widget should not grow to fill the available space, but should be sized according to sizeHint().

See also setAutoAdd(), insertLayout() and insertSpacing().

void QBoxLayout::invalidate () [virtual]

Resets cached information.

Reimplemented from QLayout.

QSize QBoxLayout::maximumSize () const [virtual]

Returns the maximum size needed by this box layout.

Reimplemented from QLayout.

QSize QBoxLayout::minimumSize () const [virtual]

Returns the minimum size needed by this box layout.

Reimplemented from QLayout.

void QBoxLayout::setDirection ( Directiondirection )

Sets the direction of this layout to direction.

void QBoxLayout::setGeometry ( constQRect&r ) [virtual]

Resizes managed widgets within the rectangle r.

Reimplemented from QLayout.

bool QBoxLayout::setStretchFactor ( QWidget*w, intstretch )

Sets the stretch factor for widget w to stretch and returns TRUE if w is found in this layout (not including child layouts); otherwise returns FALSE.

bool QBoxLayout::setStretchFactor ( QLayout*l, intstretch )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Sets the stretch factor for the layout l to stretch and returns TRUE if l is found in this layout (not including child layouts); otherwise returns FALSE.

QSize QBoxLayout::sizeHint () const [virtual]

Returns the preferred size of this box layout.

Reimplemented from QLayoutItem.